vizulo MILZO Number 2 with Rod suspension Instructions

vizulo MILZO Number 2 with Rod suspension

Dimensions

Netto Weight: Approx. 2.1 – 7 kg

• Install the diffuser only in a clean room using gloves!
• Diffuser cover may accumulate small electrostatic charges that make it susceptible to dust and other small particles.
• It should only be cleaned using dry microfiber cloth or a compressed air duster.
• Remove all protective film before installing the diffuser!

Top entry mount

WARNING

• Do not touch LED modules!
• Do not put any tools or other items on LED modules!
• In case any LED is physically damaged (example shown below) the warranty is void.

Remove all protective film before installing the diffusor

Energy efficiency class of contained light source(s)

Indoor Luminaire cleaning

Possible cleaning equipment

• It is important to clean luminaires in association with luminaire mounting or component changing. Reactive parts surfaces should be cleaned from dust and grime pollution.
• It is also important to remember that the voltage should be disconnected before the cleaning process is initiated. Electrical components and cables must not be exposed to water or detergents.

Information about the luminaire’s components disassembling can be found in user’s instructions.

1. Switch off the power supply.
2. Wash and wipe the outside part.
3. Clean the inside of the luminaire.
4. Do not touch or wet LED modules.
5. Close the luminaire tightly.
6. Make function test.

Cleaning and drying

Luminaire body

Vacuuming with a soft brush. Neutral dishwashing detergent with lukewarm water / Cleaning detergent, without grinding effects, in lukewarm water. Drying: Self-drying in room temperature or wipe off with a slightly damp cleaning cloth.

Reactor and di user cover

In case of loose dirt clean with soft duster or cleaning cloth without microbes, or use compressed air. For light, soiling dilute a citric acid-based cleaning product with water (e.g. 30 ml Frosch® citrus cleaner in 5 litre of water). Cleaner should be non-abrasive, pH neutral, and alcohol-free. In case of heavy soiling: Oil and grease can be removed using a mixture of alcohol and water (1:1), e.g. methylated spirits. Residues of alcohol-based cleaning products are easily wiped away with a water-soaked cotton cloth. Stubborn stains can be soaked in diluted citrus cleaner. Drying: Blow-off with compressed air or use a lint-free, fresh and clean cotton cloth.

Plastic covers and caps

Vacuuming with a soft brush or compressed air. In case of heavy soiling: cleaning detergent, without grinding effects, in warm water at, maximum 55 degrees Celcius. Wash with a soft, clean cloth (without microbes) in plenty of water. Ruins with lukewarm water. Drying: Self-drying in room temperature or wipe off with a slightly damp cleaning cloth (without microbes).

Terms of use and maintenance

Before the luminaire is turned on, it should be mounted according to this mounting instruction or any other applicable regulations.

Mounting instructions

Mounting of luminaire must be performed by a qualified person according with the following instructions:

• The warranty of the luminaire does not apply if the mounting of the luminaire has been performed in precipitation (rain, snow, hail).
• The warranty of luminaire does not apply if a control system unauthorized by VIZULO or an inapplicable LED driver has been used to drive the luminaire.
• The warranty of the luminaire does not apply if it has been used in an unsuitable ambient temperature or has been supplied by voltage outside of the specified range.
• The warranty of the luminaire does not apply if the LED driver program has been changed in any way.
• The warranty of the luminaire does not apply if the logged history data of the LED driver has been deleted without the permission of VIZULO.
• The warranty of luminaire does not apply, if it has been mounted in unspecified angles or upside down (luminaire glass directed up), or it has been completely submerged underwater.

Safety instructions

Any actions with the luminaire must be performed by a qualified person, who is certified according with national regulations and requirements. To prevent any accidents person installing the luminaire must follow national safety requirements and following instructions:

• The label containing the technical parameters of the luminaire has to be studied before the work on it has begun.
• Any luminaire build or design changes are prohibited.
• The luminaire must be used in good technical condition and according with this instruction.
• Only VIZULO authorized spare parts and accessories can be used to repair the luminaire.
• The repair of the luminaire has to be performed by a qualified and certified person.

Maintenance and repair

Luminaire has to be disconnected from electrical grid before it is opened and/or repaired!

• The person working with the luminaire must follow national regulations and legislations that apply to the maintenance and testing of electrical or electronic appliances.
• The luminaire may need to be cleaned depending on its environment. Only a damp cloth or a sponge may be used to clean the luminaire. Use only household detergents diluted by water.
• Only VIZULO authorized spare parts may be used for the luminaire.
• Instruction for changing spare parts must be requested from VIZULO and studied before the repair is attempted.
• LED modules, lens and LED drivers can be changed on an installed luminaire, but it is advised to perform this task indoor to avoid water entering the luminaire.
• Spare parts (lens, LED modules and drivers) should be ordered from the information available on the luminaire label.

SIA VIZULO

Laucu Lejas, Iecava, Latvia, LV-3913
www.vizulo.com

References

• Vizulo

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>