essential Babyfoon Baby Monitor User Guide

essential Babyfoon Baby Monitor

Thank You for purchasing an Essent;iel b brand product;, We pay) special attention to the RELIABILITY, EASE OF USE and DESIGN of our productis. We hope that YOU will be Pull) satisfied with this boby) monitor:

Getting started

Your baby monitor is composed of two units,

• the parent unit, which serves as an audio and visual alarm
• when the baby unit detects talking or

This device has a VOX mode that lets the transmitter (baby unit) go into standby mode automatically when your baby is happily sleeping. It only activates if needed: when sound is detected.

• The baby unit comes with a power cord
• The parent unit comes with two rechargeable AAA batteries and a mains adapter for recharging these batteries.

FEATURES

• Audio baby monitor
• VOX function
• Adjustable sound level
• Optional wall mounting
• DECT technology (wireless telecommunications technology)
• Range 50 m indoors / 300 m in open areas
• Weighs 44 kg
• 2 x mains adapters
• 2 x AAA batteries (included)
• 16 h battery life
• Night mode
• Triggered by voice only
• Audio and visual signal if baby is talking/crying
• Completely private connection/zero interference

Before initial use

Unpackaging

• Remove all of the
• Check that the device has not been damaged during transport. Do not plug the device into the mains supply if damaged! If damaged, please contact

Place of installation

Set up the baby unit at least 1 m away from your baby.
The parent unit can be set up a maximum of 50 m away from the baby unit when indoors and 300 m from the baby when outdoors.

CONNECTION

• Baby unit: connect the power cord to the unit, then plug the power cord into the wall socket.
• Parent unit: remove the battery compartment cover and insert the two batteries provided, paying attention to the indicated polarity Put the cover back on. If the batteries are depleted, connect the parent unit’s
• Connect the parent unit’s mains adapter to the unit and plug the mains adapter into a wall socket. Leave to charge for 16 hours.  mains adapter to the unit and plug the mains adapter into a wall socket to recharge the batteries.

Comments:

• The first time you use the monitor, leave the parent unit plugged in for 16 hours straight to fully charge the batteries.
• Put the batteries in the parent unit before connecting the mains adapter.

Turning on/off

Press and hold the ON/OFF button for 3 seconds on each of the units to turn the system on or off.

Operating

When both units are on, the ON indicator light on the baby unit is solid green.

Low battery

The batteries need to be recharged when the low battery indicator light on the parent unit starts flashing green and the unit starts beeping. The batteries last about 16 hours.
Connect the parent unit’s mains adapter to the unit and plug the mains adapter into a wall socket. Leave to charge for 16 hours.

Out of range

If the range limit indicator on the parent unit is solid green, then the units are positioned correctly in relation to one another and are the right distance apart.
If the range limit indicator on the parent unit is flashing green and the unit is beeping, then the units are not positioned correctly in relation to one another. You need to bring them closer together.

Sound level

The sound level indicator on the parent unit expands
Press and hold the ON/OFF button for 3 seconds on each of the units to turn the system on or off. and changes colour as sound/crying gets louder.
The harder your baby is crying, the more colourful the indicator.

Volume control

The + and – buttons on the parent unit can be used to increase or decrease receiver volume. Press + or – to set the desired volume.

Important: the device can be muted!

Troubleshooting

| | ****

The ON indicator light isn’t working

| •  Check that everything is plugged in.

•  Check the battery status.

•  Press and hold the ON/OFF button for three seconds.

---|---
No sound is transmitted even

though the sound level LED lights are on

| •  Check the volume.

•  Check the battery status.

Reception is poor, there’s interference

| •  Check the battery status.

•  Move the units closer together.

•  Increase the volume.

•  Move the Parent unit away from

any electronic devices that are operating.

The device makes a squealing noise| •  Decrease volume.

•  Increase the distance between the parent unit and baby unit.

All information, designs, drawings and pictures in this document are the property of SOURCING & CREATION. SOURCING & CREATION reserves all rights to its brands, designs and information. Any copy and reproduction through any means shall be deemed and considered as counterfeiting.

Protection of the environment

This symbol attached to the product means that it is an appliance whose disposal is subject to the directive on waste from electrical and electronic equipment (WEEE). This appliance may not in any way be treated as household waste and must be subject to a specific type of removal for this type of waste. Recycling and recovery systems are available in your area (waste removal) and by distributors. By taking your appliance at its end of life to a recycling facility, you will contribute to environmental conservation and prevent any harm to your health.

SERVICE RELATION CLIENTS

• Customer Relations Department
• Art. 8009631
• Ref. B-Phone
• Made in China
• SOURCING & CREATION

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>