iGlucose Essential SMBGM-TMB-2282-G Blood Glucose Meter User Guide
- June 1, 2024
- iGlucose Essential
Table of Contents
iGlucose Essential SMBGM-TMB-2282-G Blood Glucose Meter
Product Information
- Specifications
- Model: SMBGM-TMB-2282-G
- Reference: TeleBGM 2282-G
- Manufactured by: Smart Meter, LLC
- Origin: Made in China
Product Usage Instructions
- Use the lancing device
- Wash and dry your hands and the test site well.
- Insert a new test strip into the meter.
- Use the lancing device to obtain a drop of blood from your fingertip.
- Immediately touch the tip of the test strip to the drop of blood. The blood should be pulled into the test strip through the tip. Do not put blood on top of the test strip.
- The meter will count down from 5 to 1, and then your test result will be displayed and automatically stored in the meter memory.
- Troubleshooting Guide
- What It Means
- Blood or a control solution was applied to the test strip before the flashing drop appeared on the display.
- The meter is sensing a used or contaminated test strip.
- What You Should Do
- Discard the test strip and repeat the test with a new one. Wait for the flashing blood drop on the display before testing.
- Discard the test strip and repeat with a new one. Wait for the flashing blood drop on the display before testing.
Your Meter and Test Strip
Your Lancing Device
Prepare the Lancing Device
Important:
- Prior to testing, wipe the test site with an alcohol swab or soapy water.
- Use warm water to increase blood flow if necessary.
- Then dry your hands and test the site thoroughly.
- Unscrew the lancing device cover from the body of the lancing device. Insert a sterile lancet into the lancing device.
- Push the lancet firmly in the lancing device and twist the safety tab of the lancet until it loosens, then pull the safety tab off the lancet.
- Carefully screw the cover back onto the lancing device.
- Adjust the puncture depth by rotating the lancing device cover
- Pull the cocking barrel back to set the lancing device.
Performing a Blood Glucose Test
- Remove a test strip from the strip vial. Tightly close the vial cap immediately after you have removed the test strip.
- Insert the test strip into the meter in the direction of the arrows. The meter will turn on automatically.
- A symbol of a flashing blood drop will appear letting you know the meter is ready to test.
- Press the lancing device against the side of your finger with the cover resting on the finger. Push the release button to prick your fingertip.
- Immediately touch the tip of the test strip to the drop of blood. The blood should be pulled into the test strip through the tip. Do not put blood on top of the test strip.
- The meter counts down from 5 to 1 and then your test result is displayed and automatically stored in the meter memory.
Note:
- The meter and lancing device are for single-patient use. Do not share them with anyone including other family members! Do not use it on multiple patients.
- All parts of the kit are considered biohazardous and can potentially transmit infectious diseases, even after you have performed cleaning and disinfection.
- You should reference the user manual for cleaning and disinfection procedures.
Troubleshooting Guide
Refer to your User Manual for complete troubleshooting and error information, or call Customer Support: 844-445-8267 Monday-Friday 9:00 AM-5:00 PM EST. Please contact your healthcare provider for assistance after normal business hours.
CONTACT
- Manufactured for:
- Smart Meter, LLC
- 6206 Benjamin Rd.
- Ste. 314 Tampa, FL 33634
- Contact Smart Meter Customer Support
- Monday-Friday 9:00 AM-5:00 PM EST 844-445-8267
- Please contact your healthcare provider for assistance after normal business hours
- MODEL: SMBGM-TMB-2282-G
- REF: TeleBGM 2282-G
Read your User Manual for complete instructions before performing a blood
glucose test. For Single-patient use only. Do not share.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>