ZEBRONICS ZEB-RAINBOW 4.1 Channel Multimedia Speaker User Manual
- June 3, 2024
- ZEBRONICS
Table of Contents
ZEBRONICS ZEB-RAINBOW 4.1 Channel Multimedia Speaker
Thank you for purchasing the
ZEBRAINBOW – 2.1 Speaker. Please read the user manual carefully before
usage & save it for future reference.
Note:
- Avoid the usage of this speaker at the high temperature and high humidity environment.
- Avoid the self-disassembly of the product as it results in the failure of Warranty.
Features
- 2.1 channel speaker
- Wireless BT/USB/AUX/FM
- LED display
- Volume, Bass & adjustment
- RGB Lights
- Remote control
- Wall mountable
Specifications
Output power (RMS)
- Subwoofer :20W
- Satellite :15Wx2
- Total :SOW
Driver size
- Subwoofer : 10.16 cm
- Satellite : 7.62 cm x 2
Impedance
- Subwoofer :40
- Satellite :60
- Frequency response : 40Hz- 20kHz
- S/N Ratio : ~ 80dB
- Separation : ~ 45dB
File format
- support (USB) : Mp3
- Line input : 2ch RCA
Max. supported USB
- memory size : 32GB
- FM frequency range : 87.5 MHz-108 MHz
- BT name : ZEB-RAINBOW
- BT version : 5.0
Product dimension (W x D x H)
- Subwoofer : 150 x 280 x 208 mm
- Satellite : 103 x 85 x 145 mm
Net. weight
- Subwoofer : 2.82 kg
- Satellites : 216 kg
- Total : 3.25 kg
Package Content
- Subwoofer : 1 U
- Satellite :2 U
- Remote : 1 U
- Input Cable : 1 U
- QR Code Guide : 1 U
Control Panel Description
Back Panel Description
Remote Control
Power: Standby ON/OFF
Numeric Pad (0-9): To select direct tracks from USB and to select two digits
and above, by consecutively pressing
Vol+: To increase the volume
Prev: To select the previous track in BT/USB or channels in FM mode
Vol-:To decrease the volume
RPT: To Switch between REP ALL track or REP 1 track Mode: Mode Selection(BT/
AUX/USB/FM)
EQ: Equalizer
Play/Pause : To Play / Pause for current track & FM Scan (Press & Hold)
Next: To select the next track in BT/USB or channels in FM mode
Mute :To Mute/ Un mute for currently playing track
General Instructions
BT Mode:
Switch the speaker to BT mode, Scan for nearby BT devices in your device. Tap
on
“ZEB-RAINBOW” to connect.
USB Mode:
Insert the USB flash drive to the speaker. The speaker will detect the USB and
the audio files from flash drive will be played automatically. (This mode
isn’t selectable on the speaker or remote control unless a USB flash drive is
connected).
Ensure that your USB flash drive contains MP3 files (other file types not
supported).
FM Radio:
Switch the speaker to FM mode. In FM mode, press & hold the “Play/ Pause”
button in the remote or control panel to scan for the available FM channels.
Once the scanning is done, the scanned channels will begin to play. The next
button or previous button in the remote or control panel can be used to change
the FM channels.
AUX-IN:
The speaker can be connected to an audio device using an RCA to 3.5mm cable.
Connect the one end of the cable to the speaker and the other end to an audio
source.
The tracks from the audio source can be heard through the speaker.
ISO 9001:2015 Certified Company www.zebronics.com