hp OneShred 12CC Cross Cut Shredder User Manual

hp OneShred 12CC Cross Cut Shredder

Read the Operating Manual

• Read this operating manual carefully, observing all the information contained regarding handling and using the shredder. Keep the operating manual close by for future reference.
  An operating manual containing more detailed information, such as technical data, is available online at the following website: www.hp.com/off ice equipment

Intended Use

The shredder has been designed to shred paper, credit cards, paper clips, and staples. The shredder is exclusively intended for private use indoors. Any other use is considered unintended use. Unauthorized modifications or reconstructions are not permitted and lead to the loss of rights to claims under the terms of the guarantee.

Observe the Safety Information
Read and observe all the warnings to protect yourself and the environment from any harm.

Warning!
Risk of injury through the insertion mechanism. Loose items could get caught in the insertion slot and cause injuries. Keep fingers, hair, scarves, ties, jewelry, etc. away from the insertion slot.

Warning!
Risk of injury through electric shock. Handling the shredder improperly could lead to an electric shock. Unauthorized modifications or reconstructions to the shredder are not permitted. Do not operate the shredder if the power cable is damaged. Switch off the shredder immediately in the case of damage or improper functioning and disconnect the power plug. Repairs may only be carried out by properly qualified specialists. Pay attention that the shredder is set up in the vicinity of an easily accessible power socket so that the shredder can be disconnected from the power supply in an emergency. Never handle the shredder with wet hands. Avoid any contact with water. Always unplug the power plug when the device is not being used. Only use the power cable supplied.

Warning!
Risk of suffocation due to small parts, packaging or protective foils. Children can swallow or choke on small parts, packaging, and protective foils. Keep the device and its packaging materials out of reach of children.

Warning!
This device can be used by children from the age of eight and persons with restricted physical, sensory, or mental capabilities or a lack of experience and/or knowledge when they are supervised or have been instructed with regard to the safe use of the device and the risks involved with its use. Children must not be allowed to play with the device. Children must not be allowed to complete any cleaning or service work on the device without adequate supervision.

Caution!
Risk of tripping due to improperly laid power cable. Lay the power cable in such a way that nobody can trip over it. Make sure the power plug and cable cannot be damaged.

Important!
Risk of property damage. Avoid exposing the device to environmental influences such as smoke, dust, vibration, chemicals, moisture, heat or direct sunlight. Only use the shredder in indoor rooms and within the permissible ambient conditions stipulated in the Technical Data. Observe the following information to ensure that the shredder always functions as you expect it to.

• Read the operating instructions thoroughly before starting to use the device.
• Keep long hair away from the shredder.
• Keep all loose pieces of clothing, jewelry or other loose items away from the shredder.
• Keep ties and scarves away from the shredder.
• A general indication of potential risks, so that particular care is required.

Warning! This equipment is not intended for use by children. Avoid touching the media feed opening with the hands, clothing or hair, Unplug this equipment when not in use for an extended period of time. A hazardous moving part is in this equipment, keep body parts away from moving parts.

• Never reach into the insertion slot.
• Keep children and pets away from the shredder.
• Do not spray any in-
• flammable gases in the direction of the shredder. Never use air sprays.
• Insert a maximum of 12 sheets into the shredder at one time.

Caution! Risk of injury through the sharp edge of the cutting mechanism! Credit cards must be inserted vertically. Only use the product indoors. The symbol indicates that the design of the product complies with Protection Class II (double insulation). A safety connection to the electrical earthing (ground) is not necessary. The «Geprüfte Sicherheit» mark (GS tested safety mark) certifies that the product satisfies the requirements defined by the German Product Safety Act (ProdSG). The GS-tested safety mark indicates that when implemented for its intended use and in the event of foreseeable misuse the identified product will not endanger the safety and health of the user. It concerns a voluntary safety mark that was issued by an authorized testing institute.

Checking the Package Contents
Check the package contents of your shredder before putting the shredder into operation. If anything is missing or damaged, do not use the shredder. Contact our Service department.

•  OneShred 12CC shredder with a waste bin for cuttings
•  Operating manual
•  1 oiled sheet

General View of the Shredder
The following figure illustrates the shredder in detail.

Positioning the Shredder and
Starting It Up
The shredder only operates when the waste bin supplied is fitted. Do not position the shredder near any sources of heat and maintain a distance of at least 10 cm to walls. This ensures the shredder is sufficiently cooled.

1. Set the shredder down on a stable, level, horizontal surface and in the vicinity of an easily accessible power socket.
2. Mount the shredder attachment on the waste bin. The shredder attachment latches audibly in place. If the shredder attachment is not fitted properly on the waste bin, the shredder cannot be switched on. Only use the power cable supplied.
3. Connect the power cable to the device. Connect the power plug to a power socket.
4. Switch the device on by pressing the On/Off button.
   •  The status indicator lights up blue.
   •  You have put the shredder into operation.

The status indicator on the shredder lights up blue when switched on, fl ash- es red in the event of a paper jam and lights up red if the shredder overheats.

Operating the Shredder
The shredder works using an automatic shredding mechanism. The shredder is operated using the operating buttons on the top of the device. Shredding Material Automat- ically Observe the maximum permissible cutting capacity of 12 sheets.

Warning! This equipment is not intended for use by children. Avoid touching the media feed opening with the hands, clothing or hair, Unplug this equipment when not in use for an extended period of time. A hazardous moving part is in this equipment, keep body parts away from moving parts.

Important! Risk of property damage through material jam! Observe the maximum cutting capacity of the insertion slot.

1. Feed the material to be shredded in the center of the insertion slot.
2. The insertion slot draws the material in automatically and stops when no more material is fed in.

Switching the Shredder Off
Switch the shredder off when you no longer need to use it.

1. Switch the device off by pressing the On/Off button.
2. Disconnect the power plug from the power socket if the shredder will not be used for a longer period of time.

Emptying the Waste Bin
Check the fill level of the waste bin through the viewing window at regular intervals and when it is about 80% full, empty it. This prevents the shredded material from accumulating, which could lead to malfunctions.

1. Switch the device off by pressing the On/Off button.
2. Disconnect the power plug from the power socket.
3. Lift the shredder attachment from the waste bin.
4. Empty the waste bin.
5. Mount the shredder attachment on the waste bin.

Technical Data

Power supply| 220-240 V~,

50/60 Hz, 1.2 A,

300 W

---|---
Continuous operation (min) / Cool down phase (min)| 6 / 50
Max. ambient temperature [°C]| 25

We declare that this device, with regard to its task of the destruction of documents, fulfills the conditions defined for Security Level P-4 in accordance with DIN 66399.
P-4: Recommended for data media containing particularly sensitive and confidential data. Material particle area ≤ 160 mm² and for consistent particles: strip width ≤ 6 mm (e.g. particles 4 x 40 mm).

Disposal

The adjacent symbol indicates laws dictate that electrical and electronic apparatus no longer required must be disposed of separately from domestic waste. Dispose of your device at a collection point provided by your local public waste authority. Packaging materials must be disposed of according to local regulations. Observe the identification on the packaging materials during the waste sorting process; they are identified by abbreviations (b) and numbers (a) which have the following significance: 1–7: plastic/20–22: paper and cardboard/80–98: composite materials. Packaging materials must be disposed of according to local regulations.The packaging is made of environmentally friendly materials that you can dispose of at local recycling points. Advice on the options with which to dispose of your old device can be obtained from your municipal or local administration offices.The device and packaging materials can be recycled; sort them for disposal to simplify waste management.  The Triman logo is only relevant for France.The device and the packaging material can be recycled, so sort them prior to disposal for better waste management. Contact your local authorities for information on the various options available to ensure correct disposal. Observe the following identifications of the packaging materials: (a) numbers, (b) abbreviations and (c) materials that have the following significance: 1–7: plastics / 20–22: paper and cardboard / 80–98: composite materials and (d) type of packaging. The logo is only applicable to Italy.

Queries and Service

Dear customer, we are delighted that you have chosen this equipment. In the case of a defect, please return the device together with the receipt and original packing material to the point of sale. Further information is available under the heading Contact & Service on our website: www.hp.com /officeequip-ment.

Declaration of Conformity
The CE Mark on the device confirms conformity. The UKCA mark on the device confirms its conformity.The Declaration of Conformity can be read online at www.hp.com/officeequipment.

Manufacturer

• GO Europe GmbH
• Zum Kraftwerk 1
• D-45527 Hattingen
• germany

References

• HP Office Supply - Best Official HP Products & Supplies
• Laptop Computers, Desktops, Printers, Ink & Toner | HP® Official Site
• HP Office Supply - HP Office Supply

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>