TMK 8SD 3785 Light and Easy 3 User Manual

June 9, 2024
TMK

Use instructions for TMK e-Classic and TMK ReflexTMK 8SD 3785 Light and
Easy 3

How to tilt TMK bike carriers

TMK 8SD 3785 Light and Easy 3 - Fig

Push your carrier towards the car, lift the control ball and tilt slowly to position 1 or 2.
Back to driving position – push the bikes (by handlebars) towards your car until the square bar fits in (as illustrated)

How to remove TMK bike carriers from the bar

TMK 8SD 3785 Light and Easy 3 - Fig 1

Push the locking peg in your direction (as arrow shows) and simultaneously tilt up upwards the body of the bike rack.
Approval number – ATEST 8SD 3785
This product is identical to the type approved by Ministry of transport of the Czech Republic under approval number ATEST 8SD 3785.
Bike carrier can be used for approved for tow bars from producers with ISO 50 norm.
Load transport must comply with the requirements of Act No. 361/2000 Coll., on Road Traffic.

TMK 8SD 3785 Light and Easy 3 - Fig 2

  1. Place the bike carrier on the tow bar (lower “jaw” and upper “bowl” encircle the tow bar), push the body of the carrier in the direction of the arrow.TMK 8SD 3785 Light and Easy 3 - Fig 3
  2. Check the peg fits as in the detail.
  3. Move the control ball in the direction of arrow.TMK 8SD 3785 Light and Easy 3 - Fig 4
  4. Hold the control ball and lift the carrier into driving position. Check the square bar fits as illustrated in the picture.TMK 8SD 3785 Light and Easy 3 - Fig 5
  5. Press the peg in the direction of arrow, set the bended rods into horizontal position, check the peg fits correctly.TMK 8SD 3785 Light and Easy 3 - Fig 6
  6. Hang up the bike on the bike carrier as illustrated (on lower frame and below seatpost), tighten the frame with rubber belts by the screw heads located at the bottom of the bended rodsTMK 8SD 3785 Light and Easy 3 - Fig 7
  7. Mount the bikes inversely (seat to handlebars), tie a pedal of the first bike to the bike carrier, tie remaining bikes with straps together.TMK 8SD 3785 Light and Easy 3 - Fig 8
  8. Place the light panel at the end of the bended rods, tighten the screws.TMK 8SD 3785 Light and Easy 3 - Fig 8
  9. Move the lights CAREFULLY in the direction of arrows (DO NOT PUSH OVER), plug in

Instructions also onwww.tmk.cz/nosice-kol-tmk or

https://www.youtube.com/watch?v=UR1IiKE57dM

Suitable for 2 e-bikes (TMK e-Classic), or 3 regular bikes (TMK Reflex) Load capacity:
50kg (TMK e-Classic)
60kg (TMK Reflex)
Producer:
TMK system, s.r.o.
Husova 863
277 13 Kostelec nad Labem, Czech Republic
Package includes: bicycle carrier (incl. rubber belts) and light panel.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals