HARPER HB-527 Bluetooth Earbuds Headset User Manual

June 3, 2024
HARPER

HARPER HB-527 Bluetooth Earbuds Headset User Manual
HARPER HB-527 Bluetooth Earbuds Headset

Thank you for choosing Harper products. Before use, read the operating instructions and save them in case you have any questions about servicing the device.

PRECAUTIONARY MEASURES

  1. Do not disassemble device by yourselves. It may lead to malfunction of device.
  2. In case of any malfunction, please contact authorized service center.
  3. Do not lead device and accessories unattended. Please keep them out of reach of children and pets. Small parts can cause suffocation.
  4. The device is supposed to be used in normal climate conditions. Extreme climate conditions (temperature below 0°C and above 45°C, too high level of humidity) can cause malfunction of device and wreck electronic components of device.
  5. Protect device from water, do not touch it with wet hands.

Information about restrictions on the use of technical equipment, taking into account its purpose for work in residential, commercial or industrial areas
The equipment is designed to work in residential and commercial areas, public places, industrial areas with small and medium power consump-tion, without exposure to harmful and dangerous production factors. The equipment is intended for operation without the constant presence of main – tenance personnel.

REQUIREMETS TO TRANSPORTATION

Transportation of equipment should be carried out in the original packaging in covered vehicles by any means of transport.

APPOINTMENT

These headphones are designed for mobile devices with Bluetooth functionality. They are designed for wireless transmission of audio data: talking on the phone, listening to music files.

ITEMS INCLUDED

  • 1 x Bluetooth stereo headset HB-527
  • 1 x Type-C charging cable
  • 1 x User’s manual
  • 1 x Guarantee card
  • 3 x Pair of silicone ear pads (big, middle, small sizes)

ACTIVATION AND PAIRING

  1. Take out the left and right earbuds simultaneous-ly. They will turn on automatically and connect with each other within 3 seconds.
  2. After the left and right earbuds are connected successfully, you will hear a “Bee” sound. This indicates the earbuds are ready to pair.
  3. Turn on the pairing function on the device you want to pair with the earbuds.
  4. In the list of available devices, find and select “Air -Talker”.

OPERATION

Music operation

  • Short press: Play/Pause
  • Short press x2 Right earbud: Next song
  • Short press x2 Left earbud: Previous song
  • Long press 2s Right earbud: Volume up (1 bar)
  • Long press 2s Left earbud: Volume down (1 bar)

Calls control and voice assistant

  • Short press: Answer incoming call/Hang up
  • Long press 2s: Reject incoming call
  • Short press x3: Voice assistant

ENC NOISE CANCELLATION TECHNOLOGY

Each earbud has 2 microphones that capture the sounds of external noise and effectively suppress them, acting as a filter for your voice. Thus, your speech becomes clearer for the interlocutor, provid-ing a better communication process. This function is activated automatically in the talk mode.

CHARGING AND LED INDICATION

  1. It is recommended to fully charge the headphones and case when using it for the first time. It is recom-mended to use the supplied Type-C cable connected to a power source to charge the case.
  2. When the case is being charged: <30% of battery -LED will flash with red light, 30%-60%, – green, 60%-99% – blue, 100% – keeps permanent blue.
  3. If headphones are installed in the charging case, the headphone battery will be charged at the same time as the case.
  4. To charge the headphones, simply place them in the case according to the label: the left earbud marked “L” in the left compartment, the right earbud marked “R” in the right compartment, and close the case. During the charging process, the display on the earbud will light up red, when the full charge is reached, the color will change to blue, and after 20 seconds, the led will turn off.

PRODUCT PARAMETERS

  • Bluetooth version: 5.1
  • Frequency response: 20Hz — 20 kHz
  • Charging time: 1h
  • Work time: up to 5h
  • Case battery capacity: 500mAh
  • Earbuds battery capacity: 2*40mAh
  • Plug for charging: Type-C
  • The maximum work range: 10m

DISPOSAL INFORMATION

This device is designed and made of high quality materials and components, which can be recycled and reused. The symbol means that electrical and electronic equipment must be disposed of separate-ly from household waste after use.

Notes: In accordance with constant improvement, specifications and design are subject to change without notice. This product does not contain precious metals.

INFORMATION ABOUT CERTIFICATION

The products passed all the assessment procedures established in the technical regulations of the Customs Union and the Eurasian Economic Union Information about product certification, certificate number and date, validity period you can find on the website www.harper.ru or by calling technical support 8-800-600-7107 Production date is indicated on the gift-box Life duration of product: 24 months Warranty period: 12 months Warranty service is provided on the base of warranty card that goes together with the product. Warranty card and User manual are integral parts of the product. For additional information about the product and authorized service centers you may find at www.harper.ru or by telephone 8-800-600-7107.

Manufacturer: Harper International Trading Limited 15E Radio City, 505 Hennessy Road, Causeway Bay, Hong Kong Made in China

Importer/claims organization: LLC .Progress-Plyus»,App.11, floor 2, Build.50, k.1, Udaltsova Str., Moscow, Russia, 119607, tel.: +74951330210, email: info@harper.ru

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals