sachtler S2051-1063 Carry Handle for Ace Mark II Tripods Instruction Manual
- June 1, 2024
- sachtler
Table of Contents
Fit Optional Carry Handle (S2051-1063)
Fit the handle to Ace MkII 75/2 AL and 75/2 CF Tripods
S2051-1063 Carry Handle for Ace Mark II Tripods
Exploded view showing the pre-assembled components fitted in the handle.
Before attaching the handle.
Using a fingernail or small screwdriver, lever the cap away from the top of
the handle to reveal the (pre installed) mounting screw and spacer.
a. Insert the supplied Hex key into the mounting screw in the handle, align
with the bolt hole and tighten clockwise, ensure the handle is secure. Re-
insert the rubber sleeve.
b. To remove the handle, invert the tripod and reverse steps a.
CAUTION!
Ensure the carry handle is attached securely. Always check before use and
tighten the nut and bolt if required.
Always remove the camera before transporting.
Scan for Instructional video
https://www.sachtler.com/s2051-1063
Publication No. S2051-4990/1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>