tp-link tapo Smart WiFi Power Strip User Guide
- June 3, 2024
- tp-link
Table of Contents
tp-link tapo Smart WiFi Power Strip
Smart Wi-Fi Power Strip
Getting Started
- Get the Tapo app from the App Store or Google Play.
- Follow the instructions in the Tapo app to complete the setup.
Failed to Add to Home?
- Press and hold the power button on your power strip for at least 10 seconds to reset the power strip, and restart your phone. Then try again.
- Refer to the troubleshooting guide for detailed instructions: https://www.tp-link.com/support/faq/3390
Supported Load Types for EU/FR/AU Version:
100-240Vac, 50/60Hz, 10A max Resistive Load; 100-240Vac, 50/60Hz,
1.6FLA/10LRA, Motor Load Construction of Switch:Micro-gap Switch(μ) FLA=Full
Load Ampere; LRA=Lock Rotor Ampere
EU DECLARATION
IP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU) 2015/863. The original EU Declaration of Conformity may be found at https://www.tapo.com/en/support/ce/. TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tap0.com/support/ukca/.
SAFETY INFORMATION
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modity the device.
- Do not use the device where wireless devices are not allowed.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- The devices are not intended for use in locations where the temperature may be ess than actual room conditions, such as unheated warehouses or garages.
- Do not COver the power strip while in use.
- Risk of electric shock. Do not plug into another power strip or an extension cord
- An appliance is completely powered off only when unplugged from the power
- Timer& strip. Schedule could turn-on unexpectedly without the user being present.
- To Reduce the Hazardous Condition-Unplug the appliance from the SOcket-outlet before servicing.
Warranty
For more information about warranty. please visit https://www.tapo.com/en/support/
Support
For technical support, the user guide and other information, please visit
https://www.tapo.com/support/.
References
- Anatel — Agência Nacional de Telecomunicações
- Support | Tapo
- Regulatory Compliance | Tapo
- Regulatory Compliance | Tapo
- UKCA | Tapo
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>