TEKTELIC Kona Enterprise Outdoor LoRaWAN Gateway User Guide
- June 3, 2024
- TEKTELIC
Table of Contents
TEKTELIC Kona Enterprise Outdoor LoRaWAN Gateway
The Kona Enterprise Gateway supports both internal & (optional) external LoRa antennas, internal GPS, copper Ethernet backhaul, and optional 3G/4G wireless backhaul with both internal & (optional) external Cellular antennas. The Kona Enterprise Gateway is powered through Power Over Ethernet (PoE 802.3af).
What’s In The Box
The following equipment is provided for installing & commissioning the KONA
Enterprise Gateway on TEKTELIC Network Server
Note:
- Refer to Antenna Selection Guide for information on antenna use cases.
- Refer to the User Guide for more information on deployment.
- POE Injector, optional External LoRa & Ethernet Antennas sold separately.
Commission the Gateway using LeapX Application
To use LeapX, you will need a TEKTELIC Account. If you don’t have an account already, please raise a ticket in our support portal support.tektelic.com and our support team will create an account for you.
To install LeapX Application on your Smart Device, please search for “TEKTELIC
LeapX” on the Google Play Store or the Apple App Store. Once the app is
installed, log in to the app using the username and password of your TEKTELIC
account. Then follow the in-app instructions online.
Note:
Once the Gateway shows “Online” you are ready to add sensors to your network.
Gateway Troubleshooting
KONA Enterprise LED States
Note:
If you have questions about this Gateway visit the TEKTELIC Support Portal at
support.tektelic.com for access to our
knowledge base.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>