Schneider Electric 4703X IMFF Module Owner’s Manual
- June 8, 2024
- Schneider Electric
Table of Contents
Schneider Electric 4703X IMFF Module
Potential disassembly risks
The Circularity profile provides information about preparation for re-use and treatment. It identifies the relevant EEE components and materials as well as their location. Safety instructions for product dismantling and de-pollution are provided in the User manual or maintenance guide.
End-of-Life Instructions
Recommendation| Number on drawing| Component / Material|
Weight (in g)| Comment
---|---|---|---|---
To be depolluted| 1| Electronic Board (Communication) > 10cm²| 148|
Other| 2| Plastics and Other parts| 232|
To be dismantled
| ****
3
| ****
Metals and semimetals
| ****
56
| IMFF Shell and other stainless steel parts should be dismantled at end of life.
Product Description
| Manufacturer identification | Triconex (Schneider Electric) |
|---|---|
| Brand name | Triconex |
| Product function | IMFF Module is part of the Tricon CX safety system |
which act as an interface to provide communication between the main processor
and I/O modules.
Product reference| 4703X
Additional similar product
references
| 4701X
Total representative product mass| 436 g
Representative product
dimensions
| 202mm x 153.4mm x 19.6mm
Accessories| Yes accessories needed (I/O Chassis Backplane along with
the screws are needed)
Date of information release| 08/2021
Additional Information
Legal information
| This product family is in the scope of European Union directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). The product family must be disposed of according to the legislation of the country. This document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic information to assure an appropriate end-of-life treatment for the components and materials of the
product.
---|---
In case of special transportation:
transportation method
| No special transportation
Recyclability potential
|
22%
| Based on the “ECO’DEEE recyclability and recoverability calculation method” (version V1, 20
Sep. 2008 presented to the French Agency for Environment and Energy Management: ADEME).
Country Customer Care Center
http://www.schneider-electric.com/contact.
26521 Rancho Parkway South
CA 92630
LAKE FOREST
www.schneider-electric.com
Published by Schneider Electric
© 2021 – Schneider Electric – All rights reserved.