CAMP Z359.12 Enigma Swivel User Manual
- June 5, 2024
- CAMP
Table of Contents
Compliant with new European Regulation
ANSI/ASSP Z359.12-2019
PPE-R/11.135 V2
Notified body controlling the manufacturing of the product:
Ridlerstraf &e 65, 80339 Munich — Germany — N.0123
Notified body intervening for the EU type-examination:
Zona Industriale Villanova – 32013, Longarone (BL) — Italy —- N.2008
Zona Industriale Villanova, 7/A
32013, Longarone (BL) – Italy – N.2008
MARKING
- Brand and name of the manufacturer
- Name of the device
- Reference number of the product
- Conformity marking according to European regulation
- No. of the notified body controlling the manufacturing of the product
- The certified model according to EAC standard
- The certified model according to ANSI standard
- Minimum breaking load
- Read the instructions For use e Month and year of manufacture Serial number
- Working load limit
NOMENCLATURE
-
Attachment ring
[1a] Pivoting pin -
Swiveling body –
[2a] Closed body –
[2b] Openable body
[2c] Rotation axis -
Cap.
-
Nut
[4a] Friction ring -
Key
MAIN MATERIAL – MATERIALE PRINCIPALE
- [2a][2b][3] Aluminum alloy.
[1a][2c][4] Stainless steel
[4a] EPDMrubber ~
[5] TPU+stainless steel
A| MODEL| REF.| MBL
CARICO DI ROTTURA MINIMO
MINIMUM BREAKING LOAD| WLL
CARICO DI LAVORO MINIMO
WORKING LOAD LIMIT| | ANSI/ASSP| TP TC
019/2011
---|---|---|---|---|---|---|---
ENIGMA| 3259
1| 23 kN| 500 kg (-, 5 kN)| 123| Z359.12-2019| •
1
ENIGMA
BLACK
.| 325903
https://www.youtube.com/watch?v=IxL5E6HCbgQ
GENERAL INFORMATION
C.A.M.P. meets the needs of workers at height with light and innovative products. These are designed, and instructions inform you about the correct use throughout the life of the product: read, understand and keep these instructions. If lost, you can download the instructions from the website www.camp.it. The EU declaration of conformity can be also downloaded from our site. The retailer must provide the instruction manual in the language of the country where the product is to be sold.
USE
This equipment should be used only by trained and competent persons. Otherwise, the user should be under the direct supervision of a trained and competent person. This notice will not teach you the techniques for work at Climbing, and any other activity for which these products may be used is inherently dangerous. The consequences of incorrect selection, misuse or poor maintenance of equipment could result in damage, serious injury or death. equipment intended for use in fall arrest systems, it is essential for safety that the anchor device or anchor point should always be positioned, and the work carried out in such way as to minimize both the potential for falls and the potential fall distance. Verify the free space required beneath the user at the workplace before each occasion of use, so that, in the case of a fall, there will be no collision with the ground or the other obstacle in the fall path. A full body harness is the only acceptable body holding device that can be used in a fall arrest system. The product should only be used as instructed and no alterations should be made to it. It may be used in conjunction with products. Note that it is impossible to show or imagine all improper utilization and that this product should be used
MAINTENANCE
Cleaning of the textile and plastic parts: rinse in clean water and neutral
soap (max temperature 30°C) and dry naturally away From direct heat. Cleaning
of the metallic parts: rinse in clean water and then dry. Temperature:
Always keep this product below 80°C so as not to affect its performance of the
product. Chemicals: withdraw the product From service if it comes into contact
with chemical reagents, solvents or Fuels which could affect the performance
of the product.
STORAGE
Store unpacked in a cool, dry, dark place away From heat sources, high humidity, sharp edges, corrosives or other possible causes of damage.
RESPONSIBILITY
The company C.A.M.P. SpA, or the distributor, will not accept any responsibility for damage, injury or death resulting From misuse of or From modifications to a C.A.M.P. branded product. It is the user’s responsibility at all times to ensure that he/she understands the correct and safe use of any equipment supplied by or From C.A.M.P. SpA, that he/she uses it only for the purposes For which it is designed, and that he/she practices all proper safety procedures. Before using the equipment, take all necessary steps to familiarise yourself with rescue techniques should an emergency occur. You personally assume all the risks and responsibilities for your actions and decisions: if you are not able or not in a position to assume these, do not use this equipment.
3 YEAR WARRANTY
This product is warranted against any Faults in materials or manufacture for 3 years from the purchase date.
SPECIFIC INFORMATION
INSTRUCTIONS FOR USE
Summary
C.A.M.P. Enigma is a device designed to connect two elements between each
other, which need freedom of movement. Enigma is a device certified according
to the PPE- R/11.135 V2 methodology and the relevant points of EN 795:2012 and
EN 354:2010. Enigma is also tested according to the American ANSI/ASSP
Z359.12-2019 standard.
By way of non-exhaustive example, some applications are the creation of
anchorages with self-orientable points, insertion in work-at-height and rescue
systems for increased Freedom of movement and prevention of twisting ropes
and lanyards. This product is intended for use to protect and prevent the risk
of Falling From a height in rescue operations, in work at a height, in the
practice of mountaineering, rock-climbing and other vertical sports that use
similar techniques.
Use
Connect Enigma to the other components of the system through one of the
following three methods.
USE WITH CONNECTORS (fig.1): insert the connector into the attachment ring
[1]. Use EN 362 class B or ANSI 2359.12 connectors for industrial use or EN
12275 for mountaineering use; in the case of permanent connections, select by
preference quick links (Class Q). Avoid transverse stresses on the connectors
(fig.1b). DIRECT CONNECTION (fig.2): compatible equipment can be connected
directly to the attachment rings [1] without using connectors. Examples of
connectable equipment are descenders, ascenders, pulleys, metal rings, webbing
loops, stitched ropes, lanyards, harnesses’ attachment points, and anchors.
The connected equipment must be Free of burrs and/or sharp edges. Check that
the connected equipment can rotate freely into the attachment ring [1]. For
installation, Follow the instructions reported in Fig.2a (scan the QR code
for video instructions). The nut [4] can be opened and closed by means of
either the key [5] or any compatible tool (screwdriver, coin). Always check
the nut [5] is completely closed before use, no specific torque is required.
CONNECTION THROUGH KNOTS (fig.3): rope, webbing, and loops can be knotted
directly into the attachment rings [1]. Check that is allowed to make knots on
the connected equipment. Before loading the system, always check that all
components are correctly assembled and positioned in the right direction. The
working load limit (WLL) is 500 kg (~5 KN). The breaking load (MBL) is 23 kN
(Fig.4). Breaking load when loaded transversely (minor axis) is 20 KN (MBL)
with 2.5 kN of working load limit (WLL)(fig.4b). Prevent Enigma from hitting
uneven surfaces or sharp edges that could compromise its strength. (Fig.5). IF
used in a fall arrest system, the system must limit the peak force below 6
kN. This force is transmitted to the structure, which must be verified in
terms of minimum strength (12 KN (metal anchors) or 18 kN (Fabric anchors))
and of Force direction. Do not stay above the anchor point: risk of
Failure/injuries in case of fall. Take measures to avoid pendulum. Enigma
should not be used alone as a fall arrest component. Enigma can be used in a
Fall arrest system when combined with an EN 355 energy absorber and EN 362
connectors; in this case the maximum length of the string- Enigma-absorber-
connector system must never exceed 2 and must be connected to the attachment
element (A) of an EN 361 Full body harness. The length of the device should
be taken into account when used in any fall arrest system, as it will
influence the length of a Fall. Use adequate rescue equipment and provide
adequate training for the work crew so that they can quickly rescue the
injured person to minimize the suspension trauma effects.
CHECKING AND MAINTENANCE
Check the correct rotation of the swivel balls [2] at each use in case of dirt, clean with a blast of compressed air and/ or immerse in fresh water, and subsequently dry in a ventilated environment. After cleaning, the mechanism can be lubricated. Cleaning and lubrication are recommended after each use in a marine environment.
REVISION
The safety of users depends upon the continued efficiency and durability of the equipment. In addition to the normal inspection required before, during and after each use, this product must be inspected by a skilled person every 12 months, starting From date the product is first used; this date and the subsequent checks must be recorded on the product’s life sheet: keep this literature For inspection and reference For the life of the device. Check the legibility of the product’s markings. In case one of the following effects are present, the product should be withdrawn From service immediately:
- excessive wear (> 1 mm) of the attachment rings [1];
- creation of space between the pivoting pins [1a] and the swiveling body [2];
- damage of the thread of the rotation axis [2¢] which does not allow to screw the nut [4];
- presence of cracks;
- corrosion that seriously alters the surface state of the metal (it does not disappear after a slight rubbing with sandpaper);
- presence of permanent deformations;
- total locking of the rotation function, which cannot be solved through cleaning and lubrication. Any product or component showing any defect or wear, or if in doubt, should be withdrawn from service immediately. Each product in the safety system can be damaged during a fall and must be always inspected before being used it again. Do not continue to use a product after a major Fall because damage may have occurred, even if no external signs are visible.
LIFETIME
The lifetime of the product is unlimited unless any defect appears, provided that periodic inspections are made at least once every 12 months From the date the product is First used and the results are recorded in the life sheet of the product. The Following Factors can reduce the lifetime of the product: intense use, damage to components of the product, contact with chemical substances, high temperatures, tears and abrasions, violent impacts, and Failure to maintain as recommended. When suspecting that the product is no more safe and reliable, please contact C.A.M.P. SpA or the distributor.
TRANSPORTATION
Protect the product from risks such as those detailed above.
- Model
- Serial number
- Month/Year of manufacture
- Purchase date
- Date of first use
- User
- Comments
- Inspection every 12 months
- Data
- OK
- Name/Signature
- Date next control
CO 01 MANUAL155
2022 – Rev. 0
© C.A.M.P. SpA
C.A.M.P. SpA Costruzione Articoli Montagna Premana
Via Roma, 23 – 23834 Premana (LC) – Italy
Tel. +39 0341 890117 – Fax +39 0341 818010
www.camp.it – contact@camp.it
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>