IDEAL 32 Push-In Wire Connectors Instruction Manual
- June 3, 2024
- IDEAL
Table of Contents
IDEAL 32 Push-In Wire Connectors
Installation Instructions
Models 32, 33, 34, 87, 88 & 90
- Do not exceed the rating of these connectors.
- Turn OFF power before removing or installing connectors.
- Wiring must comply with all applicable electrical regulations.
- COPPER TO COPPER ONLY. Do not use on aluminium wire.
- Incorrect use of these connectors can cause electrical fires, personal injury or death.
- These connectors are suitable for solid and semi-rigid (<7 strands) conductors. They are not suitable or rated for use with flexible cable with >7 strands.
- Strip wires back 13mm.
- Grip wire firmly and push conductor into open port.
- Use only one conductor per port.
- Connectors are reusable on solid wires of the same wire gauge or larger. If reusing connectors, cut and re-strip conductors.
- In order to remove a wire, pull and twist the wire back and forth.
- DO NOT RE-USE connector on stranded wire.
Specifications
| Model 32 Red 2-Port| Model 33 Orange 3-Port| Model 34 Yellow 4-Port| Model 87 Grey 5-Port| Model 88 Blue 6-Port| Model 90 Black
8- Port
---|---|---|---|---|---|---
Rating| 32 Amp / 450V / 105°C maximum| 24 Amp / 450V / 105°C maximum
Depth| 19.81 mm| 18.52 mm| 18.52 mm| 18.21 mm
Width| 13.21 mm| 17.53 mm| 20.83 mm| 23.03 mm| 15.32 mm| 35.03 mm
Height| 9.65 mm| 9.02 mm| 15.42 mm| 9.02 mm
Wire Combination Range| Solid wire| 0.75mm2 to 4.0mm2| 0.75mm2 to 4.0mm2
Stranded wire*| 1.5mm2 to 2.5mm2| 1.5mm2 to 2.5mm2
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>