IDEAL ID2501 Stand Fan User Manual

IDEAL ID2501 Stand Fan

Product Information

The IDEAL ID2501 Stand Fan is a room fan designed to improve thermal comfort in living spaces. It has a power output of 45 watts and a supply voltage of 220-240 V~ 50/60 Hz. The fan has a height adjustment feature, an oscillation option, and three-speed settings. The fan comes with a safety clamp, protective mesh, screws, locking nut propeller, security nut mesh, mandrel, motor housing, oscillation switch, body, cable, switch and 1st/2nd/3rd gear, lock, extension tube, height adjustment ring, cover, base tube, screws, and feet.

Product Usage Instructions

1. Place the unit on a stable and level surface.
2. Adjust the height by loosening the ring (17), sliding the tube (16) in or out to the required height, and then locking by tightening the ring (17).
3. Adjust the angle of the canopy.
4. Fully extend the cable.
5. Set the switch (14) to position 0 and connect the unit to themains.
6. Use the switch (14) to select the fan speed (1, 2 or 3 buttons).
7. The unit is switched on by pressing buttons 1, 2 or 3. The unit is switched off by pressing button 0.
8. Regardless of the set speed, the oscillation option can be selected by pressing the switch (11). This function is deactivatedby pulling out the switch (11).
9. Before cleaning, unplug the appliance from the mains and wait for the propeller to stop.
10. The appliance must not be submerged in water. Wipe the unit with a damp cloth and then wipe dry.
11. Remove the front net, propeller, and rear net. Wipe the components with a damp cloth and dry them.

Safety Instructions

• Read the entire manual thoroughly before using the fan for the first time.
• Do not plug too many appliances into a single electric circuit.
• Do not use the fan close to bathtubs, showers, swimming pools, and other water containers.
• The fan is designed to operate at a household.
• Place the fan on a flat and dry surface.
• Do not insert fingers or any other objects into the inlet and outlet holes.
• Do not place the fan near cushions or curtains.
• The working fan must be always supervised, especially when there are children nearby.
• When leaving a room where a fan operates, switch it off.
• Do not spray any insect killers or similar agents near the operating fan.
• Do not use the appliance under high temperature.

SAFETY INSTRUCTIONS

Before first use, please thoroughly read the entire manual. It is recommended to keep this instructions manual for future reference.

1. The cord should be plugged into the power supply of parameters indicated in the data plate.
2. Please, do not plug too many appliances to a single electric circuit.
3. WARNING: do not use close to bathtubs, showers, swimming pools and other water containers.
4. The unit is designed to operate at a household.
5. Place the unit on a flat and dry surface.
6. Do not inert fingers or any other objects into the inlet and outlet holes.
7. Do not place the unit near cushions or curtains.
8. Working fan must be always supervised, especially, when there are children nearby.
9. Leaving a room where a fan operates, switch it off.
10. Do not spray any insect killers or similar agents near the operating fan.
11. Do not use the appliance under high temperature (exceeding 40oC), in localizations where the humidity rate is high (e.g. bathroom) and localizations where explosive atmosphere occurs.
12. Before switching the unit on make sure all its elements are correctly fixed. Under no circumstances one may switch the unit on before it has been completely assembled!
13. Do not cover the protective mesh.
14. Do not use the appliance as a hanger.
15. In case the power cord is damaged it must be replaced by the manufacturer’s authorized service center.
16. The device can be used by children aged 8 and older and by persons with limited physical, sensory or mental capabilities, or persons without sufficient experience and knowledge only under supervision or if previously instructed on the safe use of the appliance and the possible risks. Children shall not play with the appliance. Cleaning and maintenance that are the responsibility of the user shall not be carried out by children without supervision. Protect the appliance and the power cord against children under 8 years old.
17. The device can be repaired only by authorized service center. Any upgrades or any use of non-original spare parts or equipment components is prohibited and endanger the safety of use.
18. Eldom Sp. z o. o. is not liable for any damage resulting from improper use of the appliance.

WARNING: Improper use of the appliance may cause injury
WARNING: Plastic bag can be dangerous, to avoid danger of suffocation keep this bag away from babies and children.

OPERATING INSTRUCTION

STAND FAN ID2501

GENERAL DESCRIPTION

1. Safety clamps
2. Plate
3. Protective mesh – front
4. Screws – set “A”
5. Locking nut propeller
6. Propeller
7. Security nut mesh
8. Protective mesh – rear
9. Mandrel
10. Motor housing
11. Oscillation switch
12. Body
13. Cable
14. Switch and 1st/2nd/ 3rd gear
15. Lock
16. Extension tube
17. Height adjustment ring
18. Cover
19. Base tube
20. Screws – set “B”
21. Feet
22. Base

TECHNICAL DATA

• power: 45 W
  • supply voltage:
  • 220-240 V~ 50/60 Hz

INTENDED USE

The IDEAL ID2501 fan is designed to improve thermal comfort in living spaces. With its help, the air is set in motion, thus providing a pleasant cooling sensation.

USE

• Before use, check that the unit is complete and not damaged.
• Before first use, unpack the appliance and assemble the individual components.
• Insert the feet (21) into the ends of the base elements (22).
• Connect the base elements (22) together “crosswise”, photo 01.
• Use screws (20) to connect the assembled base (22) to the base tube (19), photo 02.
• Slide the cover (18) onto the base (22), photo 03.
• Slide out the tube (16) and lock it with the ring (17).
• Connect the body (12) to the tube (16) and lock by tightening the lock (15).
• Slide the rear mesh (8) onto the stem (9).
• Align the holes of the net (8) with the hooks on the motor housing (10) and fix with the nut (7).
• Slide the propeller (6) onto the pin (9) and fix it with the nut (5).
• Fix the plate (2) on the front grid (3) with screws (4).
• Connect the front grid (3) to the rear grid (8) at the bottom with the supplied screw, photo 4 and secure with the clamps (17), photo 5.
• Place the unit on a stable and level surface.
• Adjust the height. Loosen the ring (17), slide the tube (16) in or out to the required height, then lock by tightening the ring (17).
• Adjust the angle of the canopy.
• Fully extend the cable.

OPERATION

• Set the switch (14) to position “0” and connect the unit to the mains.
• Use the switch (14) to select the fan speed (“1”, “2” or “3” buttons).
• The unit is switched on by pressing buttons “1”, “2” or “3”. The unit is switched off by pressing button “0”.
• Regardless of the set speed, the oscillation option can be selected by pressing the switch (11). This function is deactivated by pulling out the switch (11).

CLEANING AND MAINTENANCE

• Unplug the appliance from the mains and wait for the propeller to stop before cleaning.
• The appliance must not be submerged in water
• Wipe the unit with a damp cloth and then wipe dry.
• Remove the front net, propeller and rear net – wipe the components with a damp cloth and then wipe dry.
• Do not use strong or surface-damaging cleaners to clean. Do not use any aggressive cleaning agents.

ENVIRONMENTAL PROTECTION

• The appliance is made of materials which can be recycled.
• It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

WARRANTY

• This appliance is designed for domestic use only.
• It cannot be used for professional purposes or for other than the intended use.
• Improper use will nullify the guarantee.

The disposal of used electrical and electronic equipment (applies to European Union countries and other European countries with separate waste- collection systems).
This symbol on the product or its packaging indicates that it should not be classified as household waste. It should be handed over to an appropriate company dealing with the collection and recycling of electrical and electronic equipment. The correct disposal of the product will prevent potential negative consequences for the environment and human health resulting from hazardous substances present in the product. Electrical devices must be handed over to restrict their re-use and further treatment. If the device contains batte ries, remove them, and hand them over to a storage point separately.

DO NOT THROW EQUIPMENT INTO THE MUNICIPAL WASTE BIN.
Material recycling helps to preserve natural resources. For detailed information on how to recycle this product, please contact your local authority, the recycling company, or the shop where you bought it.

Eldom Sp. z o.o.
ul. Pawła Chromika 5a
40-238 Katowice,
POLAND
tel: +48 32 2553340
fax: +48 32 2530412
www.eldom.eu

References

• ELDOM - Sprzęt AGD dostosowany do Twoich potrzeb

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>