ideal-tek TEK-SCOPE Plus HD Inspection System User Manual
- October 27, 2023
- ideal-tek
Table of Contents
ideal-tek TEK-SCOPE Plus HD Inspection System
SYSTEM INFORMATION
TEK-SCOPE PLUS is a standalone high definition optical inspection system.
The camera system has the following functions:
- Auto Focus On/Off
- Adjustable focus
- Digital Zoom ON/OFF
- LED lights
- Monitor connection via DisplayPort / HDMI port
- Direct image Storage on USB memory stick
- PC Connection Software via micro USB / USB port
- Measurement & drawing capabilities
TEK-SCOPE can be connected to any monitor with a DisplayPort / HDMI port. When used with a computer you can install the included TEK-SCOPE PLUS Software and make measurement, drawing and much more.
ASSEMBLY
TEK-SCOPE PLUS package includes the following items:
- Inspection system unit
- Remote control
- Power Supply
- Monitor Cable (DisplayPort-HDMI) – Computer cable (USB USB mini)
- TEK-SCOPE PLUS Software and manual on USB memory stick
- 3D lens
Use with a monitor
Place the camera unit on the desired stable location.
Connect the monitor to the camera unit by the monitor cable.
Connect the power supply to a power outlet.
Connect the power supply to the camera unit with the DC cable.
Connect USB memory stick to save pictures (not videos).
Connect Ethernet cable to share the screen simultanously with other people.
You can now start the system by pressing the button on the top of the camera
unit.
If needed, turn the LED lamp on/off by using the red button on the back of the
unit.
Use with a PC
Connect your computer with the USB cable (USB mini for TEK-SCOPE PLUS, USB for
computer).
Install the TEK-SCOPE PLUS PC software. You can now start the device by
pressing the button on the top of the camera unit and then open the installed
software.
If needed, turn the LED lamp on/off by using the red button on the back of the
unit.
USE WITH A MONITOR
Remote control
Use the remote control when the device is connected to the monitor.
Z+ Zoom in (+)
Z- Zoom out (-)
Increase brightness 
Decrease brightness 
Press FUNC shortly and autofocus will go off / on. When autofocus is off,
& will
adjust focus manually. OK changes magnification to wide angle and shows an
artificial white cross. Press OK again to exit and go back to previous
magnification.
Press MODE to change between color and greyscale.
Press MODE for 5-8 seconds and the screen will be saved as image in the
USB memory stick.
Press FUNC for 5-8 seconds and the menu will appear with more choices.
LENS: default is +3.
SHOW ZOOM: how long the OSD ZOOM info will last on the screen.
SHOW BRIGHTNESS: how long the OSD Brightness info will last on the screen
ZOOM SPEED: how fast the system will zoom.
SCREEN DIAGONAL: set your monitor diagonal dimension.*
SHOW CLOCK: show date and time on the screen.
DIGITAL ZOOM: turn Digital Zoom on / off, default off
ASPECT RATIO: set aspect ratio, default 16:9
ADJUST DATE / TIME: set time and date.
SHOW USB DEVICE: free space on the memory stick.
*IMPORTANT: exactly set your monitor diagonal before start working to obtain a correct magnification value
Remote control pairing
Hold the remote control on the back of the TEK-SCOPE PLUS while the power is on, then press the OK button on the remote control for 5 seconds. When a red light start flashing, the pairing procedure is complete. Note: The remote control inside the package is paired by the Factory. Changing batteries or using remote with more than one device may require additional pairing.
TEK-SCOPE live streaming
Live streaming on TEK-SCOPE PLUS is only possible with a unique connection to a Monitor or to a PC. The Device cannot work properly if connected to a PC and a Monitor at the same time.
4D LENS
If you are using a Tilt table or any higher object, you should replace the
lens to a +4 lens. You can do it using the removal tool. Clean the lens before
using the system to avoid fingerprints etc. Notice that you also need to
change the lens settings in the TEK-SCOPE PLUS menu. Press FUNC button on the
remote for 5-8 seconds to get into the menu. Lens Change to +4 or +3
by using the buttons
on the remote.
USE WITH A PC
TEK-SCOPE PLUS software
Operating System required: Windows 10 (only).
Ethernet connection and cable: yes
INSTALLATION
Copy and Paste the TEK-SCOPE PLUS Software folder on your desktop
To install TEK-SCOPE PLUS select “IdealTek_xxxxxxxx_x64.appxbundle”
To check the software is work properly you should connect TEK-SCOPE PLUS to
the power supply and to the computer using USB cable, start the device and
then launch the app.
Authorize the app to connect to computer microphone and camera.
if you use the PC with an external monitor, don’t use extended or dual mode
unless the resolution on both displays are the same.
After installing the Software, you can access TEK-SCOPE PLUS functions:
Toolbar
Draw Mode Toolbar
Text
Press T button and click on the part of your image where you want to add text . To edit or move an existing text select again the T button from the toolbar and click anywhere directly on the text you want to edit/move. Press T button to exit.
SETTING menu
Lens: +3 or +4 depending on what you select, it doesn’t follow the
settings in the menu of Live image
Unit: mm or Inch
Number of Digits: how many digits are showed after the decimal
Mouse wheel zoom: scroll wheel mouse to zoom IN and OUT in live mode
Zoom value / rotation: how much the zoom moves vs. the scroll wheel
Editing Colors: change the color of text and drawings in the Draw Mode
DO NOT CONNECT THE DEVICE BOTH TO A MONITOR AND PC TOGETHER.
If the computer and the monitor are used together, like extended or dual,
the algorithm for magnification/ measuring will be effected.
With the following screens sizes: 20″(1600×900); 22″(1920×1080);
22″(1680×1050); 24″(1920×1080); 24″(1920×1200) measuring will have a tolerance
of 1-2% without calibration.
Measuring
Put your object under the camera. Choose the magnification by the software
buttons.
Notice: using the remote control, the Zoom factor will be not updated and
measuring will be wrong. DO NOT USE REMOT CONTROL WHEN CONNECTED TO THE PC BUT
USE THE SOFTWARE TOOLBAR.
Press the draw button. Press LB (Left button) on your mouse, select the
horizontal or vertical button and click the starting point. Then go to the
second measuring point and press LB on your mouse. The measure value will
appear on the screen.
Calibration
If you need a more accurate measuring, the calibration should be done.
Put a ruler horizontally on the subject you wish to measure. Verify that your
magnification is the one you want, select the drawing mode, and select
“calibration” button. Draw an horizontal line and set your “own value” in mm,
then press “set”.
ETHERNET
Connect an Ethernet cable to your system and your network will give the system
an IP address, this address can be found either in the menu OSD or under
settings in the software. This address can be used in Google Chrome browser on
every device connected to the same network domain to show a live picture.
IMPORTANT: Edge & Firefox browsers are currently not supported by this
unit.
OPTIONAL ACCESSORIES
TEK-TILT_PLUS 360° Inspection Table
Maneuverable tilting table provides perfect object alignment.The table plate
is covered with an ESD-safe material. The 4D lens is included to replace
standard TEK-SCOPE PLUs lens. Diameter: 220 mm; Height: 73 mm
TEK-XY Inspection Table
Portable XY ESD safe table for easy control of magnified object.
Horizontal Movement: 190mm; Vertical Movement 235 mm; Table Dimension: 420×410
mm; Weight= 5.45 kg
TECHNICAL FACTS
Magnification 27” monitor: 46x optical (bigger monitor size results in
increased optical magnification) up to 460x digital (92x recommended)
Autofocus and manual focus
Free working distance under camera : 310mm
Resolution: FHD on monitor, 1920 x 1080
On screen magnification rate
Sensor: 1.2/8’’
Store image on USB stick
Ethernet connection
Wireless Remote control
Frame rate: 60 Hz
Output: DisplayPort / USB
LED light: 12 V, built-in
Weight: 4,5 Kg
Microscope battery: Lithium CR1216 3 Volt
Remote control batteries: 2 x Alkaline LR03PRO AAA 1,5v
SAFETY INFORMATION
Never connect the product if it has been exposed to moisture.
Avoid pinching power cord.
If the product is moved from cold to warm, condensation may occur. Wait about
30 minutes before using the product.
Use TEK-SCOPE PLUS only on stable work surface, with at least 45 cm depth.
If normal functions can’t be reset after troubleshooting, turn power off and
contact your local supplier.
WARRANTY
1 year warranty for manufacturing defects.
CONTACT
Ideal-tek SA
via Motta 4
6828, Balerna – Switzerland
phone: 0041 91 683 3229
email: info@ideal-tek.com
www.ideal-tek.com
Documents / Resources
|
ideal-tek TEK-SCOPE Plus HD Inspection
System
[pdf] User Manual
TEK-SCOPE Plus HD Inspection System, TEK-SCOPE Plus, TEK-SCOPE, HD Inspection
System, Inspection System
---|---
References
- Ideal-tek - Swiss High precision tools since 1964
- Test and Measurement Equipment | Tektronix
- Ideal-tek - Swiss High precision tools since 1964
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>