Allied Telesis IS230-10GP Layer 2 Switch User Guide

: June 3, 2024
: Allied Telesis

Table of Contents

IS230-10GP Layer 2 Switch
Supported Platform
New Features
Resolved Issues
Product Documentation
Contacting Allied Telesis
Documents / Resources

IS230-10GP Layer 2 Switch
Version 1.1.2 Software Release Notes

IS230-10GP Layer 2 Switch

Please read this document before using the management software. The document has the following sections:

“Supported Platform,” next
“New Features” on page 1
“Enhanced Features” on page 2
“Resolved Issues” on page 2
“Known Issues” on page 2
“Product Documentation” on page 3
“Contacting Allied Telesis” on page 3

Note:
The firmware passed the testing program for Global Availability and is approved for use in live and production environments.

Supported Platform

Version 1.1.2 management software is supported on the IS230-10GP Layer 2 Switch. For upgrade instructions, refer to the IS230-10GP Switch Web User Guide or IS230-10GP Switch Reference Guide. The guides are available on the web at alliedtelesis.com/us/en/library/search.

New Features

Version 1.1.2

Adds support for managing the IS230-10GP Switch with Microsoft Edge™.

Version 1.1.1

CPU/memory usage rate monitor commands
Core-dump debug tool

Version 1.1.0

Ethernet Connectivity Fault Management (CFM)
Ethernet Protection Switched Ring (EPSR) transit mode
Ethernet Ring Protection Switching (ERPS) V2 – ITU-T G.8032
Remote authentication with RADIUS or TACACS
Hardware Access Control Lists (ACL)
IP Source Guard
Dynamic Host Configuration Protocol (DHCP) Snooping
Address Resolution Protocol (ARP) Spoofing

Enhanced Features

Version 1.1.2

Updated OPENSSL v1.1.1 to v1.1.1h to resolve CVE-2022-0778.
Updated OPENSSH to v8.4.1.
Updated HOSTAPD to v2.9.
Added new cipher suites to Transport Layer Security (TLS) v1.2.
Added support for TLS v1.3 and its three cipher suites.
Updated Secure Shell (SSH) with additional key exchange algorithms.

Version 1.1.1
None.
Version 1.1.0

Fine-tuned the bucket size of egress rate limit (included in v1.0.1.00)

Version 1.0.1

Improved packet scheduler architecture, which manages egress port/traffic class bandwidth.

Resolved Issues

Version 1.1.1

PoE Legacy Mode could not be enabled.
The switch disabled Denial of Service defenses when rebooted or power cycled.
The switch improperly configured its log settings after being rebooted or power cycled.
SNMP packets with the “Get-Request with ID=0” header caused memory leaks.
Selected OIDs failed to work properly with the LLDP-MIB.

Known Issues
None.

Product Documentation

IS230-10GP User Guide
Instructions on managing the switch and configuration utility.
IS230-10GP Reference Guide
Descriptions of the basic features of the command line user interface, the commands associated with each feature, and command examples.
IS Series Installation Guide Hardware installation instructions.
IS230 Series Data Sheet
General product information for the IS230 Series industrial managed Layer 2 switches.

The documents are available from the Allied Telesis web site at alliedtelesis.com/us/en/library/search.

Contacting Allied Telesis

For assistance with this product, you can contact Allied Telesis technical support on the Services & Support section of the Allied Telesis web site at www.alliedtelesis.com/support. You can find links for the following services on this page:

Helpdesk (Support Portal) – Log onto Allied Telesis interactive support center to search for answers to your questions in our knowledge database, check support tickets, learn about Return Merchandise Authorizations (RMAs), and contact Allied Telesis technical experts.
Software Downloads – Download the latest software releases for your product.
Licensing – Register and obtain your License key to activate your product.
Product Documents – View the most recent installation guides, user guides, software release notes, white papers and data sheets for your product.
Warranty – View a list of products to see if Allied Telesis warranty applies to the product you purchased and register your warranty.

To contact a sales representative or find Allied Telesis office locations, go to www.alliedtelesis.com/contact.

Copyright 2022 Allied Telesis, Inc.
All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesis, Inc.
Allied Telesis and the Allied Telesis logo are trademarks of Allied Telesis, Incorporated. Microsoft Edge is a trademark of Microsoft Corporation. All other product names, company names, logos or other designations mentioned herein are trademarks or registered trademarks of their respective owners.
Allied Telesis, Inc. reserves the right to make changes in specifications and other information contained in this document without prior written notice. The information provided herein is subject to change without notice. In no event shall Allied Telesis, Inc. be liable for any incidental, special, indirect, or consequential damages whatsoever, including but not limited to lost profits, arising out of or related to this manual or the information contained herein, even if Allied Telesis, Inc. has been advised of, known, or should have known, the possibility of such damages.

PN 613-003132 Rev A
Allied Telesis, Inc.
IS230-10GP Version
1.1.2 Software Release Notes