HardHead 452-348 Inspection Hatch Instruction Manual
- June 6, 2024
- HardHead
Table of Contents
452-348
452-349
452-350
USER INSTRUCTIONS FOR INSPECTION HATCH OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for
future reference. (Translation of the original instructions).
Jula reserves the right to make changes. For the latest version of operating instructions, see www.jula.com
Read the user instruction carefully before use!
Save the instruction for future reference. User instruction for inspection
hatch
- Inspection hatch for installation in both the wall or ceiling.
- Suitable key part number 452354
| Size part number 452348 | 150×150 mm |
|---|---|
| Size part number 452349 | 200×200 mm |
| Size part number 452350 | 300×300 mm |
INSTALLATION
- Remove the hatch from the frame.
- Draw and mark out the outer edge of the frame’s inside where the installation is to be made.
- Cut out the opening in the board and position the frame.
- Screw down the frame. 5. Refit the hatch.
JULA AB, BOX 363, SE-532 24 SKARA
2022-01-24 0
Jula AB
Read User Manual Online (PDF format)
Loading......