DENVER HSM-5003 Surveillance Camera User Guide

DENVER HSM-5003 Surveillance Camera

Specifications :

• Model: DENVER HSM-5003
• Bottom Cover
• USB Connector
• microSD Slot
• TV Out connector
• PIR
• Infrared Flash
• Lens
• GSM Antenna
• 2 inch color LCD Display
• Sound recorder
• SIM card slot
• Lock
• Power switch
• Battery Depot
• Portable remote controller

Product Usage Instructions

Mode Selection:
The camera has 3 basic operation modes:

1. OFF mode: Power switch is at OFF position.
2. ON mode: Power switch is at ON position.
3. TEST mode: Power switch is at TEST position.

In the above three modes, the OFF mode is the specified safe mode when replacing the microSD or batteries and transporting the camera.

System Settings:
A. There are 3 modes under system setting for your selection

1. Camera: It only takes photos at a time.
2. Video: It only takes videos at a time.
3. Camera & Video: It takes photo firstly, then takes videos.

B. There are also 2 ways to take photos or videos:

1. Manually by using the remote control: After sliding power switch to TEST, without any menu on the screen, press Shot (Right) on the remote control to take photos or videos.
2. Automatically: After sliding power switch to ON, the LED blinks for 15 seconds, then the camera takes photos or videos when the movement is detected.

Viewing Photos and Videos
To view the photos or videos on the camera:

1. Turn off the camera.
2. Slide power switch to TEST.
3. Press OK key on remote control to enter view model.
   • a. Photos: Press up or down on the remote control to view the previous or next photo.
   • b. Videos: Press left button on the remote control to start the video, press left button again to stop. Note: Press OK to return to screen.

Note : Heavy rain, fog, and drizzle (in the dark) may result in white photos without motive. This is not an error with the camera.

Sending Image via 2G/GSM/MMS/GPRS:
MMS Setting Steps:

1. Insert microSD card and SIM to camera, put batteries in cam, screw antenna to it, then turn camera to test mode, check there are signal bar and ”SIM” on the camera screen. Then connect the camera to the PC with the included USB cable. Insert CD to computer, open and then double click.
2. Choose Go to table, select.
3. Insert.
4. Fill in and or.
5. Go to table, choose.
6. Click button and save as Parameter.dat to microSD card.
7. Plug USB cable from camera.
8. Go to in camera menu, check the subsetting is the same with above setting.
9. Turn camera to on mode.

GPRS Setting Steps:

1. Insert microSD card and SIM to camera, put batteries in cam, screw antenna to it, then turn camera to test mode, check there are signal bar and ”SIM” on the camera screen. Then connect the camera to the PC with the included USB cable. Insert CD to computer, open and then double click.
2. Choose Go to table, select , .
3. Insert all.
4. Fill in sender email info in and .
5. Go to table, choose.
6. Click button and save as Parameter.dat to microSD card.
7. Plug USB cable from camera.
8. Go to in cam menu, check the sub setting is the same with above setting.

Frequently Asked Questions (FAQ)

1. Q: What should I do if I get white photos without motive?
   A: Heavy rain, fog, and drizzle (in the dark) may result in white photos without motive. This is not an error with the camera.

2. Q: How do I view photos and videos on the camera?
   A: To view photos or videos on the camera:
   Turn off the camera.
   Slide power switch to TEST.
   Press OK key on remote control to enter view model.

   • a. Photos: Press up or down on the remote control to view the previous or next photo.
   • b. Videos: P ress left button on the remote control to start the video, press left button again to stop.
     Note: Press OK to return to screen.

3. Q: How do I send images via 2G/GSM/MMS/GPRS?
   A: Follow the MMS Setting Steps or GPRS Setting Steps provided in the user manual to configure the necessary settings for sending images via 2G/GSM/MMS/GPRS.

DENVER HSM-5003 Surveillance Kamara

Quick Start Guide

Overview

1. Bottom Cover 2) microSD Slot
2. USB Connector 4) TV Out connector
3. PIR 6) Infrared Flash
4. Lens 8) GSM Antenna
5. 2 inch color LCD Display
6.  Sound recorder
7.  SIM card slot
8. Lock
9. Power switch
10. Battery Depot
11. Portable remote controller

The camera has 3 basic operation modes:

1. OFF mode : Power switch is at OFF position.
2. ON mode: Po wer switch is at ON position.
3. TEST mod e: Power switch is at TEST position.

In the above three modes, the OFF mode is the specified safe mode when replacing the microSD or batteries and transporting the camera.

• A. There are 3 modes under system setting for your selection.

  • a. Camera
    It only takes photos at a time.

  • b. it only takes videos at a time.

  • c. Camera &Video.
    It takes photo firstly, then takes videos.

• B. There are also 2 ways to take photos or videos.

  • a. Manually by using the remote control
    After sliding power switch to ‘TEST’, without any menu on the screen, press Shot(Right) on the remote control to take photos or videos.

  • b. Automatically

  • After sliding power switch to ON, the LED blinks 15s, then the camera takes photos or videos when the movement is detected.

• C. To view the photos of videos on the camera, please turn off the camera, slide power switch to Test, press OK key on remote control to enter view model.

  • a. Photos
  • Press up or down on the remote control to view the previous of next photo. b. Videos
  • Press left button on the remote control to start the video, press left button again to stop.
    Note: Press OK to return to screen.

• D. Please note, that this is not an error with the Camera:

  • Heavy rain, fog and drizzle (in the dark) will give white photos without motive.

E. Sending image via 2G/GSM/MMS/GPRS

Preparation

1. 2G/GSM Mobile Operator Service.
2. Format 2GB+ microSD card.
3. Computer(Vista, Windows 7, windows 8 system).
4. One SIM card
5. The SIM card should be able to send images via 2G/GSM/ GPRS/MMS network.
6. 6V power（4 or 8 AA Batteries, or 6V input power supply).
7. MMSCONFIG Program in CD.
8. Users need to ask the provider 2G MMS data (APN+account+password, MMSC+IP+PORT) or find this info on providers homepage.
9. 2G GPRS data for SMTP setting from provider (APN+account+password).
10.  Sender Email server info (server+port+email+password).

MMS Setting Steps

1. Insert microSD card and SIM to camera, ut batteries in cam, screw antenna to it then turn camera to test mode, check there are signal bar and ”SIM” on the camera screen. Then connect the camera to the PC with the  included USB cable. insert CD to computer, open and then double click
2. Plug USB cable from camera.
3. Go to in camera menu, check the subsetting is the same with above setting.
4. Turn camera to on mode.

GPRS Setting Steps

1. Insert microSD card and SIM to camera, put batteries in cam, screw antenna to it then turn camera to test mode, check there are signal bar and ”SIM” on the camera screen. Then connect the camera to the PC with the included USB cable.
2. Plug USB cable from camera.
3. Go to in cam menu, check the subsetting is the same with above setting.
4. Turn camera to on mode.

F. SMS Command List

MMS/SMTP need to be set ‘on’ mode before using these sms command

1. 500 take picture (can work in both mms and smtp mode) SIM in camera will send Capture when recieve 500* command

2. 505 take picture and send to the mobile who sends sms sim in camera will send Start capturing.. and still send picture to inserted Mobile ID and/or email when got 505 Command, no matter MMS or smtp mode. But sim will send images via MMS to the mobile who sends SMS when camera only in MMS mode

3. 520 check the picture quantity and battery status (can work in both MMS and SMTP mode) SIM will send
   Total Jpg:
   Free Space:
   Battery Level : when recieve 520 command

4. 530 turn on sensor (can work in both MMS and SMTP mode) SIM will send Start OK when recieve 530 command

5. 531 turn sensor to sleeping mode (can work in both MMS and SMTP mode) SIM will send Stop OK when recieve 531 command

ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S

www.denver-electronics.com

• Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.
• Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste, but should be disposed of separately.
• As the end user it is important that you submit your used batteries to the approriate and designated facility. In this manner you make sure that the batteries are recycled in accordance with legislature and will not harm the environment.
• All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.
• Hereby, Inter Sales A/S declares that the radio equipment type HSM-5003 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.denver-electronics.com/denver-HSM-5003/
  • Operating Frequency Range : 850-1900MHz
  • Max Output Power : 2W
• Imported by:
  • DENVER ELECTRONICS A/S
  • Omega 5A, Soften
  • 8382 Hinnerup
  • Denmark

facebook.com/denverelectronics

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>