XPOtool 60000 Series 8-Door Mailbox System User Manual

: June 3, 2024
: XPOtool

Table of Contents

Series 8-Door Mailbox System
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Series 8-Door Mailbox System

User’s Manual

8-Door Mailbox System (2 × 4)

60015–60017, 61747, 61753, 61763

Illustration similar, may vary depending on model

Please read and follow the operating instructions and safety information prior to initial operation.

Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further developments.

The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man ual, nor in the diagrams and illustrations shown.

Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely. If you have found an error or wish to suggest an improvement, we look forward to hearing from you. Send us an e-mail to:

service@wiltec.info

or use our contact form:

https://www.wiltec.de/contacts/

The most recent version of this manual in several languages can be found in our online shop: https://www.wiltec.de/docsearch

Our postal address is: WilTec Wildanger Technik GmbH Königsbenden 12 52249 Eschweiler – Germany

To return your goods for exchange, repair, or other purposes, please use the following address. Attention! To allow for a trouble-free complaint or return, it is important to contact our customer service team before returning your goods.

Retourenabteilung

WilTec Wildanger Technik GmbH

Königsbenden 28

52249 Eschweiler – Germany

E-mail: service@wiltec.info

Tel: +49 2403 55592–0

Fax: +49 2403 55592–15

https://www.naturewater.eu Item 60015–60017, 61747, 61753, 61763 Page 2 The Tool Experts

09 2022-1

Introduction

Thank you for choosing to purchase this quality product. To minimize the risk of injury, we ask you to always take some basic safety precautions when using this product. Please read this operating manual carefully and make sure that you understand it.

Keep these operation instructions in a safe place.

Technical drawing and parts list

№

|

Name

|

№

|

Name

---|---|---|---

1

|

Mailbox

|

7

|

Ring covers

2

|

Frame

|

8

|

Floor screw

3

|

Cross bar

|

9

|

Cross bar screw

4

|

Key and lock

|

10

|

Spacer screw

5

|

Name plate

|

11

|

Mailbox screws

6

|

Spacer

|

https://www.naturewater.eu Item 60015–60017, 61747, 61753, 61763 Page 3 The Tool Experts

09 2022-1

Assembly instructions

Choose a suitable location to place your mailbox system. Make sure that the surface is level and that you can anchor the frame firmly with the floor screws. We recommend that you assemble the mailbox close to where it is to be installed.

• Push the ring covers (7) onto the frame rods (2). Check that the ring is pointing in the correct direction (see fig. 1).

• Connect the frame (2) and the cross bars (3) using the screws (9). Leave the assembly loose and do not fully tighten the screws yet.

• Place the frame in the location that you have chosen and mark the mounting holes for the in tended location (lift the ring covers to do this).

• Set the bracket aside and drill holes at the marked locations. Then you can attach the frame (2) with the floor screws (8). Then connect the mailbox unit (1) to each other using the screws (11).

• Now attach the mailboxes (1) with the spacers (6) between the bars of the frame (2). Use the spacer screws (10) for this.

• Now tighten all the screws and finally attach the name tags (5) to the desired locations.

Figure 1