XPOtool 60031 Wall Letterbox User Manual
- October 30, 2023
- XPOtool
Table of Contents
XPOtool 60031 Wall Letterbox
Model Numbers: 60031, 60032, 60033, 60034
Thank you for choosing to purchase this quality product. To minimise the risk
of injury, we ask you to always take some basic safety precautions when using
this product. Please read this operating manual carefully and make sure that
you understand it. Keep these operation instructions in a safe place.
Scope of delivery
- Letterbox
- Rubber spacer
- Screw
- Dowel
Product Usage Instructions
Mounting
- Choose the right position for your letterbox, if possible, it should be weatherproof.
- Mark the holes to be drilled.
- Drill the holes for the dowels.
- Completely insert the dowels into the holes.
- Now install the letterbox. Be sure to use the spacers to ensure that the letterbox can be opened properly.
Note: The spacers used may create the impression that the screws are not tight enough. Please ensure that you do not compress them too much during assembly, otherwise, the mailbox cannot be opened properly. If this is the case, loosen the screws again a little.
Changing the numerical code
- The original code is 000.
- Open the door and turn the button to the B position.
- Modify the code.
- Turn the button to the A position.
- Done.
Please read and follow the operating instructions and safety information before using it for the first time. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further developments. If you have suggestions for improvement or have found any irregularities, please contact us at service@wiltec.info or use our contact form: https://www.wiltec.de/contacts/. The most recent version of this manual in several languages can be found in our online shop: https://www.wiltec.de/docsearch. To return your goods for an exchange, repair, or other purposes, please use the following address: https://www.XPOtool.com The Tool Experts. Attention! To allow for a trouble- free complaint or return, it is important to contact our customer service team before returning your goods. Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further developments. Updating the documentation If you have suggestions for improvement or have found any irregularities, please contact us. The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating manual or in the diagrams and illustrations shown. Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely. If you have found an error or wish to suggest an improvement, we look forward to hearing from you. Send us an e-mail to:
- service@wiltec.info.
- or use our contact form: https://www.wiltec.de/contacts/.
- The most recent version of this manual in several languages can be found in our online shop: https://www.wiltec.de/docsearch.
Our postal address is:
- WilTec Wildanger Technik GmbH
- Königsbenden 12
- 52249 Eschweiler – Germany
- To return your goods for exchange, repair, or other purposes, please use the following address. Attention! To allow for a trouble-free complaint or return, it is important to contact our customer service team before returning your goods.
- Retourenabteilung
- WilTec Wildanger Technik GmbH
- Königsbenden 28
- 52249 Eschweiler – Germany
- E-mail: service@wiltec.info.
- Tel: +49 2403 55592–0
- Fax: +49 2403 55592–15
Introduction
Thank you for choosing to purchase this quality product. To minimize the risk of injury, we ask you to always take some basic safety precautions when using this product. Please read this operating manual carefully and make sure that you understand it. Keep these operation instructions in a safe place.
Scope of delivery
- 2× key
- 4× screw
- 4× dowel
- 4× spacer
Information
The installation material included is suitable for strong masonry, e.g., concrete walls or brickwork. Check – before installing the letterbox – if the installation material is appropriate for your masonry. Use other installation materials if necessary.
Mounting
- Choose the right position for your letterbox, if possible, it should be weatherproof.
- Mark the holes to be drilled.
- Drill the holes for the dowels.
- Completely insert the dowels into the holes.
- Now install the letterbox. Be sure to use the spacers to ensure that the letterbox can be opened properly.
Note: The spacers used may create the impression that the screws are not tight enough. Please ensure that you do not compress them too much during assembly, otherwise, the mailbox cannot be opened properly. If this is the case, loosen the screws again a little.
Changing the numerical code
- The original code is “000.”
- Open the door and turn the button to the “B” position.
- Modify the code.
- Turn the button to the “A” position.
- Done.
Important Note
Reproduction and any commercial use (of parts) of this operating manual,
requires the written permission of WilTec Wildanger Technik GmbH.
- https://www.XPOtool.com
- The Tool Experts Item 60031–60034
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>