XPOtool 62580 Flaring Tool for Pipes Instruction Manual
- May 15, 2024
- XPOtool
Table of Contents
XPOtool 62580 Flaring Tool for Pipes
Product Information
Specifications
- Product Name: Flaring Tool for Pipes
- Model Number: 62580
- Manufacturer: WilTec Wildanger Technik GmbH
Product Usage Instructions
- Read and understand the operating instructions and safety information before using the tool.
- Untighten the T-handle (3) and turn the knob (1) above the bracket (2) upwards to set in the die rail.
- Open the die rail (1) and place the pipe inside, ensuring the surface is clean.
- Make sure the upper part of the pipe (2) protrudes approximately 1 mm over the die (1) of the die rail.
- Align the arrow with the size marker and tighten the T-handle.
- To remove the pipe, turn the knob upwards in an anti-clockwise direction. Do not tighten the T-handle until the knob is in its uppermost position.
Important Note
Reproduction and any commercial use (of parts) of this operating manual
require written permission from WilTec Wildanger Technik GmbH.
FAQ
-
Q: Where can I find the most recent version of the manual?
A: The most recent version of the manual in several languages can be found in our online shop at https://www.wiltec.de/docsearch. -
Q: How do I contact customer service for returns or complaints?
A: To return goods for exchange, repair, or other purposes, please contact our customer service team at https://www.XPOtool.com or use our contact form at https://www.wiltec.de/contacts/ before returning your goods.
Operating instructions
Read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate
insignificantly due to continuous further developments.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us. The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating manual, nor in the diagrams and illustrations shown. Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating manual is complete, accurate, and up to date, errors cannot be ruled out If you have found an error or wish to suggest an improvement, we look forward to hearing from you. Send us an email to: service@wiltec.info or use our contact form: https://www.wiltec.de/contacts/ The most recent version of this manual in several languages can be found in our online shop: https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler Germany
To return your goods for exchange, repair, or other purposes, please use the
following address. attention! To allow for a trouble free complaint or return,
it is important to contact our customer service team before returning your
goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
Email: service@wiltec.info
Tel: +49 2403 555920
Fax: +49 2403 5559215
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to always take some basic safety precautions when using this product. Please read this operating manual carefully and make sure that you understand it. Keep these operation instructions in a safe place.
Use
- Untighten the T-handle (3) and turn the knob (1) above the bracket (2) upwards. Set in the die rail.
- Open the die rail (1) and set in the pipe.
- Make sure that the surface of the pipe is clean and that the upper part of pipe (2) emerges approx. 1 mm over the die (1) of the die rail.
- Align the arrow with the size marker and tighten the T handle.
- Tighten the knob clockwise. To make the pipe smooth, turn another 2 3 turns.
- To remove the pipe, turn the knob upwards in anti clockwise direction. Do not tighten the T handle until the knob is not in its uppermost position. Remove the pipe
Important note:
Reproduction and any commercial use (of parts) of this operating manual,
requires a written permission of WilTec Wildanger Technik GmbH.
https://www.XPOtool.com
Item 62580
The Tool Experts