LOCKER DOWN LD2048 Console Safe Instruction Manual
- June 3, 2024
- LOCKER DOWN
Table of Contents
Security Products
INSTALLATION INSTRUCTIONS
LD2048/LD2048EX
[2010-2021 Toyota 4Runner]
-
For any combination style lock, it is a good idea to set the combination before installing the safe. We recommend that the combination be set with the DOOR OPEN in order to test the lock combination effectively without locking yourself out.
-
Clear out the contents of the center console for now, including the factory mat at the bottom of the console.
-
Remove the neoprene padding from the inside of the safe for now.
-
Remove the 2 Bolts at the bottom of the console compartment.
-
Set the safe into the center console.
a. The slots at the bottom of the safe should line up with the slots where the bolts were removed from Step 4. -
Secure the safe to the console compartment using the 2 10mm BOLTS provided by LOCK’ER DOWN.
-
Tighten the bolt, DO NOT OVER TIGHTEN, THIS COULD DAMAGE THE CONSOLE.
-
Re-insert the padding that was removed from the safe before installation. 9. Enjoy your purchase!
Tools Needed:
- IMPACT DRILL or SOCKET WRENCH
- 10mm Socket bit
Contents Included : 4 10mm Bolts.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>