ecler VEO-DACS4 HDMI 2.0 Audio Embedder and Extractor User Manual
- June 4, 2024
- ecler
Table of Contents
VEO-DACS4
AUDIO MANAGEMENT DEVICES
HDMI 2.0 Audio Embedder and Extractor
USER MANUAL
IMPORTANT REMARK
WARNING: SHOCK HAZARDS DO NOT OPEN
The lightning flash with the arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING (If applicable): The terminals marked with the symbol “ ” may be
of sufficient magnitude to constitute a risk of electric shock. The external
wiring connected
to the terminals requires installation by an instructed person or the use of
ready-made leads or cords.
WARNING : To prevent fire or shock hazards, do not expose this equipment
to rain or moisture.
WARNING : An apparatus with Class I construction shall be connected to a
mains socket-outlet with a protective earthing connection.
IMPORTANT SAFETY INSTRUCTIONS
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug the apparatus during lightning sorts or when unused for long periods of time.
- Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- Disconnecting from mains: When switching off the POWER switch, all the functions and light indicators of the unit will be stopped, but fully disconnecting the device from the mains is done by unplugging the power cable from the mains input socket. For this reason, it always shall remain easily accessible.
- Equipment is connected to a socket-outlet with earthing connection by means of a power cord.
- The marking information is located at the bottom of the apparatus.
- The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
NOTE: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate
radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense.
WARNING: This product must not be discarded, under any circumstance, as unsorted urban waste. Take to the nearest electrical and electronic waste treatment center.
NEEC AUDIO BARCELONA, S.L. accepts no liability for any damage that may be caused to people, animal,s or objects due to failure to comply with the warnings above.
IMPORTANT NOTE
Thank you for choosing our Ecler VEO-DACS4 HDMI 2.0 Audio Embedder and
Extractor!
It is VERY IMPORTANT to carefully read this manual and to fully understand its
contents before any connection in order to maximize your use and get the best
performance from this equipment.
To ensure optimal operation of this device, we strongly recommend that its
maintenance be carried out by our authorized Technical Services.
Ecler VEO-DACS4 comes with a 3-year warranty.
INTRODUCTION
VEO-DACS4 allows converting digital audio signals from HDMI ARC and S/PDIF
optical or coaxial inputs to a stereo analog signal. In addition, it can be
used to convert digital S/PDIF audio coming from the optical input to coaxial
and vice versa. It provides two different stereo analog outputs: a balanced
Euroblock and an unbalanced RCA
connector. Function mode is selectable through the onboard switch.
4.1. Main Features
- HDMI ARC, S/PDIF optical and coaxial inputs.
- Includes stereo analog balanced output on Euroblock connector, stereo analog unbalanced output on RCA connector, and digital S/PDIF output on optical and coaxial connectors.
- Frontal switch for input source selection.
- Supports DTS, Dolby Digital, and PCM up to 5.1 channels.
PACKAGE CONTENTS
- 1 x VEO-DACS4.
- 1 x Power Supply.
- 2 x 3 Pin Euroblock Connector.
PANELS DESCRIPTION
6.1. Front Panel
- DC 5V: Power Supply input.
- POWER LED: This LED lights in red when the device is correctly powered.
- AUDIO INPUT SELECTOR: This switch allows you to select the audio source to convert. The three options available are ARC, Optical, and Coaxial.
- ARC: HDMI input port to connect an HDMI ARC port of a display device.
- OPTICAL: Optical input to connect a digital audio source.
- COAXIAL: Coaxial input to connect a digital audio source.
6.2. Rear Panel
- OPTICAL OUTPUT: Output connector to connect a digital audio input
- BALANCED OUTPUT: Euroblock stereo analog balanced output connector to connect a stereo balanced analog input
- UNBALANCED OUTPUT: RCA stereo analog unbalanced connector to connect a stereo unbalanced analog input
- COAXIAL OUTPUT: Coaxial digital output connector to connect a digital audio input
CONNECTING DEVICES
7.1. Connections and Operation
- Connect the desired audio input to an audio source and select the correct input on VEO-DACS4 using the related source selector.
- Connect the desired digital or analog audio output to an audio input.
- Connect DC 5V power to the VEO-DACS4.
Attention: Audio analog output decodes only PCM 2.0 sources. Both balanced and unbalanced outputs extract at the same time.
MECHANICAL DIAGRAM
TECHNICAL SPECIFICATIONS
VEO-DACS4
Audio Performances
Audio Formats
Sample RateBit Depth
Frequency Response
Audio Input Connectors
Audio Output Connectors
| Dolby Digital, DTS 5.1, PCM;
32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4
KHz, 192 kHz
16 to 24-bit
20Hz–20KHz, ±3dB
1 x HDMI (ARC)
1 x S/PDIF Toslink
1 x S/PDIF Coaxial
1 x 5pins Euroblock for Stereo Balanced Output
(PCM 2.)
1 x S/PDIF Toslink
1 x S/PDIF Coaxial
Control
Source SelectorLED Indication| 3-positions switch for input source selection
Power ON 1 x red LED for power supply
General
HDMI Distance| up to 10 meters / 33 ft with Ecler VEO cables
Environmental
Operation Temperature
Humidity| 0 to +40°C (+32 to +104 °F)
5 – 90% RH (no condensation)
H23
Power Supply
Power Supply
Power Consumption
| AC 100V ~ 240V 50/60Hz
Output: DC 5V—1A
Max 3W
Mechanical
DimensionsWeight| 96.2mm x 57.5mm x 21mm (3.79” x 2.26” x 0.83”)
140g / 0.309 lbs
All product characteristics are subject to variation due to production
tolerances.
NEEC AUDIO BARCELONA S.L. reserves the right to make changes or
improvements in the design or manufacturing that may affect these product
specifications.
For technical queries contact your supplier, or distributor or complete the
contact form on our website, in Support / Technical requests.
Motors, 166‐168 08038
Barcelona ‐ Spain ‐ (+34) 932238403
information@ecler.com
www.ecler.com
Documents / Resources
|
ecler VEO-DACS4 HDMI 2.0 Audio Embedder and
Extractor
[pdf] User Manual
VEO-DACS4, HDMI 2.0 Audio Embedder and Extractor, VEO-DACS4 HDMI 2.0 Audio
Embedder and Extractor, Audio Embedder and Extractor, Embedder, Embedder and
Extractor, Extractor
---|---
|
ecler VEO-DACS4 HDMI 2.0 Audio Embedder and
Extractor
[pdf] User Manual
VEO-DACS4 HDMI 2.0 Audio Embedder and Extractor, VEO-DACS4, HDMI 2.0 Audio
Embedder and Extractor, Audio Embedder and Extractor, Extractor, Audio
Embedder, Embedder
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>