Reina Divale A-DVL1205A Anthracite Radiator 530mm x 1200mm Installation Guide
- June 3, 2024
- Reina
Table of Contents
Reina Divale A-DVL1205A Anthracite Radiator 530mm x 1200mm
DESCRIPTION
DESCRIPTION | ILLUSTRATION |
---|---|
Fixing choose the appropriate fixing for the wall material if required | |
PTFE tape | |
Electric drill | |
Masonry drill bit Appropriate to the fixings | |
Adjustable spanner | |
Radiator valve hex key | |
Flat head and philips head screw drivers | |
1 lock shield valve and 1 gate or thermostatic valve | |
Spirit level | |
Measuring tape |
OVERVIEW
1 | BRACKET COVER |
---|---|
2 | RAD. SCREW |
3 | FIXING BRACKET |
4 | RADIATOR |
5 | RAD. BRACKET |
6 | WALL SCREW |
7 | FIXING SCREW |
8 | WALL BRACKET |
9 | WALL ANCHOR |
10 | WALL |
DIMENSION
GENERAL RECOMMENDATION
- Before fitting the radiator it is necessary to wash out the heating system to remove any existing mud, scale, work residues, traces of flux, oil, etc.
- When the system water pH is outside the 5,5-8,5 range and/or when the dissolved is above 0,1mg/liter, it is always needed to protect the heating system components (the radiator is one of these) with a proper chemical treatment compatible with all parts in contact with water (silicon rubber too).
- In order to fit the radiator to the wall, it is necessary to choose the proper fixings for the wall material.
- If the system water exceeds 50°C, please install a warning mark near the radiator to avoid any accidental scalding.
- Clean the radiator surface only with a soft cloth to avoid scratching the finish and do not use chemical agents during cleaning operations. It is prohibited to climb on the radiator
- Maximum working temperature 95°C, maximum working pressure 4 bar.
Read User Manual Online (PDF format)
Loading......