Reina A-YRK1248C York Designer Radiator Installation Guide
- June 13, 2024
- Reina
Table of Contents
Reina A-YRK1248C York Designer Radiator
Product Information
The product is a radiator installation kit. It includes various components necessary for fitting the radiator, such as screws, brackets, clips, wall anchors, caps, end plugs, and an air vent. The kit also comes with a user manual titled “YORK INSTALLATION GUIDE.”
Product Usage Instructions
- This product must be installed by a fully qualified installer.
- Before installing the radiator, it is recommended to wash out the heating system to remove any existing mud, scale, work residues, traces of flux, oil, etc.
- Ensure that the system water pH is within the range of 8.5 – 5.5 and the dissolved solids are below 0.1mg/liter. If these conditions are not met, it is advised to protect the heating system components, including the radiator, using appropriate measures.
- Refer to the user manual for detailed instructions on how to install the radiator using the provided components.
This product must be fitted only by a fully qualified installer.
PARTS
OVERVIEW
DIMENSION
GENERAL RECOMMENDATION
- Before fitting the radiator it is necessary to wash out the heating system to remove any existing mud, scale, work residues, traces of flux, oil, etc.
- When the system water pH is outside the 8,5 -5,5 range and/or when the dissolved is above 0,1mg/liter, it is always needed to protect the heating system components (the radiator is one of these) with a proper chemical treatment compatible with all parts in contact with water (silicon rubber too).
- In order to fit the radiator to the wall, it is necessary to choose the proper fixings for the wall material.
- If the system water exceeds °50C, please install a warning mark near the radiator to avoid any accidental scalding.
- Clean the radiator surface only with a soft cloth to avoid scratching the finish and do not use chemical againts during cleaning operations. It is prohibited to climb onthe radiator.
- Maximum working temperature °95C, maximum working pressure 4 bar.
Read User Manual Online (PDF format)
Loading......