Reina A-CSN060104BS Single Brushed Satin Textured Horizontal Radiator 1040mm x 600mm Instruction Manual

June 3, 2024
Reina

Reina A-CSN060104BS Single Brushed Satin Textured Horizontal Radiator

1040mm x 600mm

Reina-Single-Brushed-Satin-Textured-Horizontal-
Radiator

INSTALLATION

This product must be fitted only by a fully qualified installer.

Dimensions

Reina-Single-Brushed-Satin-Textured-Horizontal-
Radiator-1

Radiator

Reina-Single-Brushed-Satin-Textured-Horizontal-
Radiator-2

Description

Reina-Single-Brushed-Satin-Textured-Horizontal-
Radiator-3 Reina-Single-Brushed-
Satin-Textured-Horizontal-Radiator-4

Instructions

Reina-Single-Brushed-Satin-Textured-Horizontal-
Radiator-5 Reina-Single-Brushed-
Satin-Textured-Horizontal-Radiator-6

GENERAL RECOMMENDATION

  • Before fitting the radiator it is necessary to wash out the heating system to remove any existing mud, scale, work residues, traces of flux, oil, etc.
  • When the system water pH is outside the 5,5-8,5 range and/or when the dissolved is above 0,1mg/liter, it is always needed to protect the heating system components (the radiator is one of these) with a proper chemical treatment compatible with all parts in contact with water (silicon rubber too).
  • In order to fit the radiator to the wall, it is necessary to choose the proper fixings for the wall material.
  • If the system water exceeds 50°C, please install a warning mark near the radiator to avoid any accidental scalding.
  • Clean the radiator surface only with a soft cloth to avoid scratching the finish and do not use chemical agents during cleaning operations. It is prohibited to climb on the radiator
  • Maximum working temperature 95°C, maximum working pressure 4 bar

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals