KODLiN K68500 Indicators Instruction Manual
- June 3, 2024
- KODLin
Table of Contents
KODLiN K68500 Indicators Instruction Manual
Warning: Knowledge of your bikes electrical system and experience with soldering and splicing wires are necessary to install this product. We recommend working with a knowledgeable motorcycle shop. We suggest testing lights before installing.
Instructions
-
Remove the stock indicator and mirrors
-
Remove the upper handlebar switch housing.
-
Pull indicator cables out as far as possible (push from center of handlebar).
-
Cut indicator cable 1“– 1 ½ “next to the switch housing.
-
Use medium strength thread locker on all hardware.
-
Install the Kodlin turn signals using mirror mounts from bottom of brake/clutch mounts. Trim the wires to the required size (about 4“long)
-
Solder and insulate the cables.
- Harness black wire to LED black wire (GROUND)
- Harness purple wire to LED yellow wire (TURN)
- Harness blue wire to LED white wire (RUNNING)
-
Push/pull the soldered and insulated cables back into the handlebar.
-
Mount the top and bottom switch housings.
-
Tighten all the hardware.
Tip: The flashing speed may change when replacing the original indicators. For bikes with a BCM turning on your emergency flashers for 5-10 minutes should allow your BCM to adjust for the new load. If that is not the case the installation of a load equalizer will solve that problem. For BCM bikes we suggest Kodlin p/n KUS11400 CanBus Load Equalizer. For non-BCM bikes we suggest a Badlands model for your year and model of bike or use brand of your choice.
Note: It is the installer’s responsibility to ensure that all the fasteners are tightened before operation of the motorcycle (we recommend following the factory torque specs). Kodlin will not provide warranty coverage on products or components lost due to improper installation or lack of maintenance. Periodic inspection and maintenance are required. Kodlin will not provide warranty coverage on products or components damaged during installation.
Attention! Before each use of the vehicle, check the functionality of the indicator lights.
For the latest install guides, video’s, FAQ’s. and Tech-Tip’s scan QR code!
Revision Date: 7/6/2022
www.kodlinusa.com
