Bellini BRA603SX 60cm Slimline Rangehood Instruction Manual

: June 3, 2024
: Bellini

Table of Contents

Thank you
Safety Instructions
Operation Mode
Installation
Start Using Your Range Hood
Maintenance and cleaning
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Bellini BRA603SX 60cm Slimline Rangehood Instruction Manual

Thank you

Thank you for choosing Bellini Appliances. Bellini prides itself on ‘affordable living’ making sure there is no compromise in your favourite room The Kitchen All Bellini appliances carry a 3 year In Home warranty,be sure to retain your installation and user manual and receipt.

For all warranty and technical queries please contact 1300 373 199

GSM Retail Australia Pty Ltd ABN: 53 007 582 475
For Warranty and technical queries: 1300 373 199 Aust OR 0508123108 NZ

www.belliniappliances.com.au

Model: BRA603SX-F FINELINE: 5120216 BRA603SW-F FINELINE: 5120214 60cm Slim Line Range hood

Safety Instructions

This manual explains the proper installation and use of your range hood, please read it carefully before using even if you are familiar with the product. The manual should be kept in a safe place for future reference. In case of failure, only the Authorised Technical Service may repair this range hood. Otherwise the guarantee will be null and void. All Bellini Appliances are for domestic use only.

Never to do:

This appliance is not intended for use by persons (including children) with reduced physical, sensory and mental capabilities, or lack of experience and knowledge, unless they have been givensupervision or instruction concerning use of the appliance by a person responsible for their safety.
Never carry out flamable cooking under the appliance
The exhaust from the range hood must not be discharged into any heating flue, which may carrycombustion products from other sources.
Do not leave lit gas burners exposed due to the risk of fire.
This range hood is not recommended for barbecues.

Always to do:

Packaging materials (eg; polystyrene and plastic items) must be kept out of reach of babies or young children at all times due to risk of suffocation.
Young children should be supervised to ensure that they do not play with the appliance.
Ensure the range hood is switched off before carrying out maintenance, to avoid any possibility of electric shock.
Grease filters must be removed every four weeks (maximum) for cleaning to reduce the risk of fire.
There must be adequate ventilation of the room when the range hood is used at thesame time as appliances burning gas or other fuels.
Always cover lit gas burners with pots or pans when range hood is in use.
Always switch off gas burners before you remove pots or pans.
If the supply cord is damaged, the cord must be replaced by the manufacturer, its serviceagent or similarly qualified persons in order to avoid a hazard
Plug must be accessible after installation.

Never to do:

This range hood cannot be installed for outdoor use.
It is prohibited to fit the range hood over a solid fuel stove
This appliance must not be connected to a chimney or vent flue which is in use.
This appliance is not to be vented into the roof cavity, must exit into open air.
Exhaust air must not be discharged into a wall cavity, unless the cavity is designed for the purpose.
This appliance should not be connected to ducting which ventilates rooms with fire places

Always to do:

Attention should be given to ensure that any applicable regulations concerning discharge of exhaust air are fulfilled.
This appliance should be installed and maintained by a suitably qualified and competent person in accordance with the relevant safety regulations.
Before connecting the appliance to the mains supply, ensure that the voltage and frequency details on the rating plate are consistent with the source of supply.

This product must not be disposed together with domestic waste. This product has to be disposed at an authorised place for recycling of electrical and electronic appliances. By collecting and recycling waste, you help save natural resources, and make sure the product is disposed in an environmental friendly and healthy way.

Product Description

Component list:

Outlet(diameter 120mm)
Main body
Grease mesh filters*

*2pcs for 60cm

Accessories

Technical data:

Model	Description	Motor	Width	Others
BRA603SX	60cm slim line stainlesssteel range hood	2x100W	600mm	Power

supply: 220 – 240v, 50Hz Lights: 2x40W incandescence Length of power cord: 1.5m Air outlet diameter: 120mm
BRA603SX-F
BRA603SW| 60cm slim line paintedwhite range hood
BRA603SW-F

Operation Mode

Your range hood can be operated in two optional modes, choose the mode suitable for your kitchen before installation.

Air ( (Extraction)

Air Recirculation

For air recirculation mode, charcoal filter is a must to eliminate cooking smells.

The air is drawn in and cleaned first by the grease filters and then charcoalfilter. The cleaned air is then re-circulated back into kitchen through holes above front panel.

You can shift between above 2 modes by turning the shifter

Installation

Dimensions:

Installation

*Width data please refer to page 4

Installation

Warning:

Check that the installation complies with the standards of local building, gas and electrical authorities. Before connecting to the mains supply ensure the mains voltage corresponds to the voltage on the appliance rating plate inside the range hood.

When installing the range hood, make sure you adhere to the minimum and maximum distances from the range hood base to the cooktop hob surface.

Hints for exhaust duct installation

The following rules must be strictly followed to obtain optimal air extraction

Keep exhaust duct short and straight
Do not reduce the size or restrict exhaust duct
When using flexible duct always install the duct pulled taut to minimize pressure loss
Failure to observe these basic instructions will reduce the performance and increase noise levels of the range hood

Ensure the exhaust ducting selected for installation complies with relevant standards and is fire retardant.

We provide two options to install your range hood, against wall (method A) or into cabinet (method B), choose what kind of method you want and then follow up corresponding instruction.

Using a spirit level mark a vertical centre line on the wall where the hood is to be positioned, and a horizontal line where the hood base will be.
NOTE: The distance from the horizontal line to an electrical cooktop underneath must be minimum of 600mm & 650mm Free space to a gas cook top and a maximum height of 750mm.

*If the instructions of the hob specify a greater distance than the minimum above, then that shall be the minimum height for installation
Drill 4 holes of 8mm diameter on the wall according to below drawing.
Hammer dry wall anchor plugs into holes. Insert 2pcs Screw(ST4x30mm) into the 2 holes at the top and fasten, hang the range hood onto the two screws, screw another 2pcs Screw(ST4x30mm) into the 2 holes at the bottom inside the range hood.
Fit the outlet and flexible exhaust pipe* on top of range hood body Secure Flexible Exhaust Pipe to outlet with zip tie or duct tape ( Not supplied )

Flexible exhaust pipe is not included in this packaging if you choose air recirculation mode, no need to install the exhaust pipe
Warning:** Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards

Install into cabinet

According to below drawing to determine where want to place the range hood, and drill 4 holes with 4mm diameter at the hanging board of your cabinet.
Fit the outlet on top of range hood body
Install the range hood onto the bottom of cabinet board, insert 4pcs Screw(ST4x30mm) with the nuts and washers into the holes and fasten.
Warning: Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards

Installation of charcoal filters

When you choose front recirculation mode, charcoal filter is a must to be installed. Charcoal filter is optional accessory. To install charcoal filter, you will need to fit outlet cover firstly, remove grease mesh filters and fit charcoal filter on. Charcoal Filters are available at your local Bunnings Part Number: CF110 Fineline:5102399
Installation

Start Using Your Range Hood

Off button

It’s used for turning off the fan.

Low Speed button

It’s used for Ventilation on the kitchen. It is suitable for simmering and cooking which do not make much steam.

Medium Speed button

Airflow speed is ideally for ventilation in standard cooking operation.

High Speed button

When high density of smoke or steam produced, press high-speed button for highest effective ventilation.

Light button

Turn on or off the light

Maintenance and cleaning

Caution

Before maintenance or cleaning is carried out, the range hood should be disconnected from the main power supply. Ensure that the range hood is switched off at the wall socket and the plug removed.
External surfaces are susceptible to scratches and abrasions, so please follow the cleaning instructions to ensure the best possible result is achieved without damage.

GENERAL

Cleaning and maintenance should be carried out with the appliance cold especially when cleaning Avoid leaving alkaline or acid substances (lemon juice, vinegar etc.) on the surfaces

STAINLESS STEEL

The stainless steel must be cleaned regularly (e.g. weekly) to ensure long life expectancy. Dry with a clean soft cloth. A specialized stainless steel cleaning fluid may be used.

NOTE: Ensure that wiping is done along with the grain of the stainless steel to prevent any unsightly crisscross scratching patterns from appearing.

CONTROL PANEL SURFACE

The inlay control panel can be cleaned using warm soapy water. Ensure the cloth is clean and well wrung before cleaning. Use a dry soft cloth to remove any excess moisture left after cleaning.

Important

Avoid using harsh cleaning chemicals, strong household detergents or products containing abrasives as this will affect the appliance appearance and potentially remove any printing of artwork on the control panel and will void manufactures warrantee

GREASE MESH FILTERS

The mesh filters can be cleaned either by hand or in the dishwasher. After cleaning ensure that the filters are completely dry before refitting.

By hand: Soak in warm water and a neutral washing up liquid. For stubborn grease stains use a soft nylon brush or sponge to help remove these stains. (Leave to dry naturally out of direct sun light)
In a dishwasher: Ensure that placement of the filters is made so as to not impede the function of the spray arm. Washing the filters in a dishwasher may cause discoloration of the aluminum inner mesh overtime although it will not affect their performance. Filters should be washed separately to crockery and kitchen utensils. it is advisable not to use rinse aid.

CHARCOAL FILTERS

When air recirculation mode is chosen, a charcoal filter is a must. It is not washable and should be replaced when it no longer absorbs kitchen odors effectively. Under normal use, this would be approximately every 3 months or more frequently for particularly heavy usage.

REPLACE LAMP

Installation

Remove two grease mesh filters, twist to remove bulb, whilst cool, and replace carefully with a new bulb. The range hood takes 2x40W incandescent bulbs.

Important

When handling bulb, make sure it is completely cool down before any direct contact to hands.

WARRANTY

In this warranty:

Australian Consumer Law means the law as set out in Schedule 2 of the Competition and Consumer Act 2010;
Company means GSM Retail Australia Pty Ltd ABN 53 007 682 475 of 142-
Fullarton Road, Rose Park SA 5067. Telephone 1300 373 199. Email admin@gsmretailgroup.com
Consumer means a “consumer” as that term is defined in Section 3 of the Australian Consumer Law as the original purchaser of a Belliniproduct;
Consumer Guarantees means the guarantees under the Australian ConsumerLaw;
You means the Consumer.
Nothing in this warranty affects any person’s rights under the Australian Consumer Law. The benefits to any Consumer under this warranty are in addition to the rights and remedies available under any Consumer Guarantees.
Subject to the other clauses of this warranty, the Company warrants to the Consumer that the Bellini product will be free of manufacturing defects and will perform to the Company’s specifications.
The benefit of this warranty extends only to the Consumer as original purchaser of a Bellini product which is installed in a domestic household area. The in Home warranty does not apply to Commercial and or industrial usage. Please See
for additional information
This warranty commences on the date of purchase of the Bellini product by the Consumer and continues for the benefit only of the Consumer until the expiry of three (3) year (Warranty Period).
If within the Warranty Period a manufacturing defect is discovered in the Bellini product or it fails to perform to the Company’s specifications as a result of some defect in materials, components or workmanship (Defect) then the Company will, at its option, repair the Bellini product or supply a replacement Bellini product free of charge. A replacement Bellini product may differ from the original product purchased by the Consumer.
This warranty will not apply to any Bellini product:
Installed by any person other than a qualified tradesperson;or
Subjected to misuse, neglect, negligence or accidental damage; or
Operated in any way contrary to any operating or maintenance instructions;or
Improperly handled, installed or maintained;or
Altered or modified prior to or after installation; or
Damaged directly or indirectly by power surges, electrical storm damage or connection to incorrect power supply
Industrial and or Commercial usage is inclusive of staff areas in office/ shop environments, hotel/ motel or other similar accommodation or rental type properties including Bed and Breakfast establishments.

DO NOT SEND IN THIS WARRANTY

Fill out the following details and file with your purchase invoice.

RETAIN & FILE WITH YOUR RECEIPT

Your Purchase Receipt/Invoice is proof of date of purchase. If you are unable to establish the date of purchase, or if the fault is not covered by this warranty, or if the product is found to be in working order, you will be required to bear all service call charges.

GSM Retail Australia Pty Ltd reserves the right to discontinue items, modify designs and change specifications without incurring obligation. Whilst every effort is made to ensure that descriptions, specifications and other information in this publication is correct, no warranty is given in respect thereof and the company shall not be liable forany errors therein.
Purchased from:
Co. Name:
Address:
Date of Purchase:
Serial number:
NOTE:

Consistent with our continuing product development policy, improvements may have been made which render the contents of this packaging slightly different to that shown.

FOR WARRANTY SERVICE CALL 1300 373 199 (AUSTRALIA) OR 0508 123 108 (NEW ZEALAND) TO CONNECT YOU TO THE NEAREST AUTHORISED SERVICE CENTRE

WARRANTY