Bellini BPI2100 Portable Induction Cooker Instruction Manual
- June 3, 2024
- Bellini
Table of Contents
OPERATION INSTRUCTIONS
Portable Induction Cooker
Model No. BPI2100
Safety Instructions
This manual explains the proper operations & instruction of your appliance, please read it carefully before using even if you are familiar with the product. The manual should be kept in a safe place for future reference. All Bellini Appliances are for domestic use only.
Warning
General Safety
- To protect against the risk of electric shock, DO NOT IMMERSE any part of this appliance in water or any other liquid or allow liquid to go into the cabinet and get short/contact inner electrical parts, the power cord must be plugged out before cleaning.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory and mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Switch off the power outlet and remove the plug before cleaning or when not in use. To unplug, grasp the plug and pull from the power outlet. Never pull the power cord. Never carry the appliance by the power cord.
- Do not operate any appliance with a damaged power cord or plug; or if the appliance malfunctions.
- Do not allow the power cord to hang over the edge of a table or counter, or touch hot surfaces.
- Operate on a dry level surface; sinks, drainboards or uneven surfaces must be avoided. Place the unit on a level surface, the distance between it and its background surrounding must be not less than 10cm
- Do not operate the unit on the gas stove or metal surface to avoid any danger.
- Please do not place paper, cloth or other articles under the bottom of the pan to get heated, to avoid the danger of fire.
- Do not place the unit on the cloth, carpet to avoid blocking the ventilation slots of device.
- Do not cover ventilation slots with anything during cooking, otherwise it will cause danger.
- Do not use this appliance for anything other than its intended use. This product is intended for household use only.
- Do not use with an extension power cord.
- Do not operate or place any part of the appliance on or near any hot surfaces (such as a hot gas or electric burner, or in a heated.
- The cooking zones will become hot when you cook.
- Therefore, always keep small children away from the appliance.
- Allow to cool before cleaning or storing.
- Do not use outdoors.
- Store the unit indoors in a dry location
- Do not attempt to repair, disassemble or modify the appliance. There are no user serviceable parts.
- Do not operate under or near flammable materials, Such as curtains, Drapes and any other combustible materials.
- The appliances are not intended to be operated by means of an external timer or separate remotecontrol system.
Disposing Of The Device
When disposing of the device, do not bring it to regular municipal waste
containers. Instead, bring it to electrical and electronic waste recycling and
reuse center. A relevant label has been put on the device, its instructions
manual, or the package. The device has been manufactured of recyclable
material. By bringing old device to recycling collection center, you show
that you care about nature. Ask your local environmental care authority for
information on location of such facilities.
Product Configuration
Control Panel
Safety Caution
Warning :
If the surface is cracked, switch off the appliance to avoid the possibility
of electric shock.
- Metallic objects such as knives, forks, spoons and lids should not be placed on the hotplate since they can get hot.
- Never touch the device and the power plug with wet hands.
- Do not connect the device to the same outlet with other devices, to reduce the risk and damage, this plug should be fit into an individual outlet. The rated electrical current is not less than 10A.
- Do not touch the plate while the unit is working, to avoid getting burned.
- Do not move the induction hotplate during cooking or with hot cookware on top of it.
- Do not place any empty containers on the device.
- Please kindly avoid hitting the plate of the unit, in case of getting cracked, should turn off the unit and plug out immediately, and then contact with service points of our company.
- Do not cook with an empty cookware, it will cause malfunction or danger
- Do not place any metal objects on the device.
- Do not touch the control panel with any sharp implements.
- Do not heat sealed food such as canned goods before opening their covers.
- Never use the device when it does not function properly, shows damage or in case it was dropped.
- Do not leave the device unsupervised during operation. Keep children and other incompetent persons as well as persons under influence of drugs or alcohol away from the device.
- Do not attempt to repair this appliance in the event of a failure.
- Scientific tests have proven that induction hotplates do not pose a risk. However, persons with a pacemaker should clear with their doctor whether to take care of some special handling advises.
WARNING
If the power cord is damaged, the power cord must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to
avoid a hazard.
This product has not been designed for any uses other than those specified in
this booklet.
2. Product operating instructions
After inserting the plug into the socket, a “Beep” will emit and all the
indicator lights and display will light up for 2 seconds, indicating the
appliance in connection with a power source, known as standby mode. At this
time, the indicator of [On/Off] will flash. Place a suitable cookware on the
center of the cooking zone. The display shows [ON] when [On/Off] key is
pressed once, the appliance goes to selection mode and the indicator above
[On/Off] remains light-up. Press the corresponding function keys to start
operation. Stop the operation and switch to standby mode by pressing [On/Off]
key after cooking.
2. Cooking Mode
2.1 Hot Pot: Press [Hot pot] key and the indicator of [Hot pot] and [W] light
up, display will show [2100] representing that the default power is 2100W.
User can press [+] or [-] to adjust 8 power levels from 300W to 2100W. To
cancel this mode, user can press other function keys or [On/Off] key to stop
the operation.
2.2 Fry: Press [Fry] key and the indicator of [Fry] and [℃] light up, display
will show [200] representing that the default temperature is 200℃. User can
press [+] or [-] to adjust 8 temperature levels from 60℃ to 240℃. To cancel
this mode, user can press other function keys or [On/Off] key to stop the
operation.
2.3 Stir-fry: Press [Stir-fry] key and the indicator of [Stir-fry] and [W]
light up, display will show [2100] representing that the default power is
2100W. User can press [+] or [-] to adjust 8 power levels from 300W to 2100W.
To cancel this mode, user can press other function keys or [On/Off] key to
stop the operation.
2.4 Soup: Press [Soup] key and the indicator of [Soup] and [W] light up,
display will show [AU] representing that the appliance works under default
power level, where it can not be adjusted. To cancel this mode, user can
press other function keys or [On/Off] key to stop the operation.
2.5 Porridge: Press the [Porridge] key and the indicator of [Porridge] and [W]
light up, display will show [AU] representing that the appliance works under
default power level, where it can not be adjusted. To cancel this mode, user
can press other function keys or [On/Off] key to stop the operation.
2.6 Milk: Press [Milk] key and the indicator of [Milk] and [℃] light up,
display will show [AU] representing the appliance works under default power
level, where it can not be adjusted. To cancel this mode, user can press
other function keys or [On/Off] key to stop the operation.
2.7 Steam: Press [Steam] key and the indicator of [Steam] and [W] light up,
display will show [0:30] representing that the appliance works under default
power level, where it can not be adjusted. The default operation time is 30
minutes. A “Beep” will emit, and the appliance will stop the operation and
return to standby mode. To cancel this mode, user can press other function
keys or [On/Off] key to stop the operation.
3. Timer function (Only for mode Hop pot, Fry and Stir fry):
User can set the cooking time when power mode is selected. Press the [Time]
key once to access the timer function, the indicator will light up. Display
will show [0:01], user can slide left or right to set the desired time, left
for hour and right for minute. The time can be adjusted from 1 minute to 2
hours 59 minutes. After setting, user can press [Time] key once to confirm or
wait until the display stop flashing. After the “Beep” signal, the appliance
will stop the operation and change to standby mode automatically when the end
of the countdown. To cancel this function, user can hold the [Time] key for 3
seconds.
4. Lock Function:
To activate the child lock, user can press the [Lock] icon. This will lock the
appliance and no operation allowed
except [On/Off] key. Hold for 3 seconds to unlock.
3. Selection of Cookware
3.1 Material required:
- Steel, cast iron, enameled iron, stainless steel, flat-bottom pans/pots with bottom diameter from 12cm to 26cm.
- So suggest to use the required pot, do not try to use other pot instead (especially pressure sensors vessels.)
3.2 Please kindly according to the below requirement if necessary, to use the vessel is not equipped.
- Pan/pot must be suitable for induction cooker.
- Pan/pot should be tried out if it is suitable/compatible for use, E1 error code does display if cookware material does not meet above displayed criteria (E.g Stainless Steel pan with copper or aluminum base plate).
- Pan/pot must be flat and come with lids that have steam vents incorporated into the lid.
4. Maintenance and Daily Care
-
Remove the power plug prior to cleaning the unit. Do not clean it until the surface cools down.
-
Glass plate, panel and the shell:
① Soft cloth for slight stain.
② For greasy, dirt, blot by using a clean damp cloth with neutral detergent. -
When the appliance cooling fan operates, dust and dirt deposits around the vent holes on the back and right hand side of the appliance, ensure that these vent holes are cleaned,
-
Remember do not wash the unit with water directly to avoid damaging.
-
To protect induction cooker, be sure to have a good contact between plug and socket before using.
-
Do not pull out the power cord directly during operation. To extend the appliance’s using life, press the “ON/ OFF” button first, switch power OFF at power outlet and only then pull out power cord from power outlet.
-
After pressing the ON/OFF button to turn appliance OFF, the cooling fan will still operate to cool the appliance down, only unplug appliance when fan has stopped and appliance has cooled down where it is safe to touch.
-
Please pull out the power cord and store appliance when not used for a long time.
5. Troubleshooting and Treatment
During operations, if any error occurred, please check the following table
before calling for service. Below are common errors and the checks to perform.
| Symptoms | Check points | Remedy |
|---|
After connecting the power and pressing the “power” key, the appliance has no
response.| Is the wall power outlet switched ON?| Use after resuming the
electricity.
Is circuit breaker on fuse box switched OFF?| Check the root causes carefully.
If the problem cannot be fixed, please contact Consumer Service Hotline
Is the plug connected firmly?
Heating being interrupted in normal use and a “Beep” will be heard.|
Incompatible cookware or no cookware is used? El error message displayed.|
Replace compatible cookware for the induction cooker.
Is the cookware not considerably placed form the center of the heating zone?|
Place the cookware at the center of the defined heating zone.
Is the cookware being heated but continually being removed?| Place a cookware
inside the heating zone.
No operation during the heating being in use.| Is the cookware empty or the
temperature too high?| Please check whether the appliance is being misused.
Is the air intake/exhaust vent clogged or dirt has accumulated?| Remove the
stuff clogging the air intake/exhaust vent. Operate the appliance again after
cooling down.
Is the cooker working over 2 hours without any external instruction?| Reset
cooking modes or use timer function.
Error codes occur.| E0 Internal circuit error
E1 Without cookware or Incompatible cookware used
E2 Internal overheat
E3 Over-voltage
E4 Under-Voltage
E5 Top plate sensor open/short circuit
E6 IGBT sensor open circuit/short circuit
E7 Top plate overheat| When showing error signal E1, E2 and E7, please check
whether the cookware is not suitable, or switch on the appliance again after
it is cooled down naturally. When showing E0, E3-E6, Please contact Consumer
Service Hotline
If the above remedies/controls can not fix the problem, unplug the appliance immediately, contact Contact Consumer Service Hotline
Product Specifications
| Model | BPI2100 |
|---|---|
| Rated Voltage | 220-220V~50/60Hz |
| Power | 2100W |
WARRANTY
1.1 In this warranty:
1.1.1 Australian Consumer Law means the law as set out in Schedule 2 of the
Competition and Consumer Act 2010;
1.1.2 Company means GSM Retail Australia Pty Ltd ABN 53 007 682 475 of 142-144
Fullarton Road, Rose Park SA 5067. Telephone 1300 373 199. Email
admin@gsmretailgroup.com
1.1.3 Consumer means a “consumer” as that term is defined in Section 3 of the
Australian Consumer Law as the original purchaser of a Bellini product;
1.1.4 Consumer Guarantees means the guarantees under the Australian Consumer
Law;
1.1.5 You means the Consumer.
1.2 Nothing in this warranty affects any person’s rights under the Australian
Consumer Law. The benefits to any Consumer under this warranty are in addition
to the rights and remedies available under any Consumer Guarantees.
1.3 Subject to the other clauses of this warranty, the Company warrants to the
Consumer that the Bellini product will be free of manufacturing defects and
will perform to the Company’s specifications.
1.4 The benefit of this warranty extends only to the Consumer as original
purchaser of a Bellini product
1.5 This warranty commences on the date of purchase of the Bellini product by
the Consumer and continues for the benefit only of the Consumer until the
expiry of two (2) year (Warranty Period).
1.6 If within the Warranty Period a manufacturing defect is discovered in the
Bellini product or it fails to perform to the Company’s specifications as a
result of some defect in materials, components or workmanship (Defect) then
the Company will, at its option, supply a replacement Bellini product free of
charge. A replacement Bellini product may differ from the original product
purchased by the Consumer.
1.7.1 Subjected to misuse, neglect, negligence or accidental damage; or
1.7.2 Operated in any way contrary to any operating or maintenance
instructions; or
1.7.3 Altered or modified prior to or after installation; or
1.7.4 Improperly handled, installed or maintained; or
1.7.5 Damaged directly or indirectly by power surges, electrical storm damage
or connection to incorrect power supply
1.7.6 Industrial and or Commercial usage is inclusive of staff areas in
office/ shop environments, hotel/ motel or other similar accommodation or
rental type properties including Bed and Breakfast establishments.
1.8 You must provide proof of your purchase of the Bellini product and the
date of purchase in order to obtain the benefit of this warranty.
The Australian Consumer Law requires the inclusion of the following statement
with this warranty:
Our goods come with guaranteed that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY THE CONSUMER MUST CALL 1300 373
199 (AUSTRALIA)
DO NOT SEND IN THIS WARRANTY
Fill out the following details and file with your purchase invoice.
RETAIN & FILE WITH YOUR RECEIPT
Your Purchase Receipt/Invoice is proof of date of purchase.
GSM Retail Australia Pty Ltd reserves the right to discontinue items, modify
designs and change specifications without incurring obligation.
Whilst every effort is made to ensure that descriptions, specifications and
other information in this publication is correct, no warranty is given in
respect thereof and the company shall not be liable for any errors therein.
Purchased from:………………………………..
Co. Name:………………………………………
Address:………………………………………..
Date of Purchase:…………………………
Serial number:……………………………
NOTE: Consistent with our continuing product development policy, improvements
may have been made which render the contents of this packaging slightly
different to that shown.
FOR WARRANTY CALL 1300 373 199 (AUSTRALIA) 0800 764 912 (NEW ZEALAND)
Thank you
Thank you for choosing Bellini Appliances.
This product will carry a 24 month replacement warranty.
For all warranty and technical queries please contact Australia 1300 373 199
New Zealand 0800 764 912
GSM Retail Australia Pty Ltd ABN: 53 007 582 475
For Warranty and technical queries: 1300 373 199 Aust
www.belliniappliances.com.au
Model: BPI1200 Fineline Aus Portable Induction Cooker
Gerard Sourcing & Manufacturing
GSM RETAIL AUSTRALIA PTY LTD
The GSM Retail Australia Pty Ltd Group Companies has a policy of continual
improvement throughout the
product range. As such the unit contained within may differ slightly from the
unit illustrated on the pack.
MADE IN CHINA for the GSM Retail Australia Pty Ltd. Group Companies
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>