bellini BRA603SCB 60cm Black Slimline Canopy Rangehood User Manual
- June 13, 2024
- Bellini
Table of Contents
USER MANUAL
CHARCOAL FILTERS INCLUDED
60cm Black Slimline Canopy Rangehood
Model No. BRA603SCB FINELINE: 0430298
BRA603SCB-F
For Warranty and technical queries: Australia 1300 373 199
For Warranty and technical queries: New Zealand 0800 764 912
www.belliniappliances.com.au
Thank you.
Thank you for choosing Bellini Appliances.
This Bellini appliance carries a 3 year in home warranty, be sure to retain
your user manual and receipt. For all warranty and technical queries please
phone: Australia 1300 373 199
New Zealand 0800 764 912
GSM Retail Australia Pty Ltd ABN: 53 007 682 475
For Warranty and technical queries: Australia 1300 373 199
For Warranty and technical queries: New Zealand 0800 764 912
www.belliniappliances.com.au
Safety instructions
This manual explains the proper installation and use of your range hood,
please read it carefully before using even if you are familiar with the
product. The manual should be kept in a safe place for future reference. In
case of failure, only the Authorised Technical
Service may repair this range hood. Otherwise the guarantee will be null and
void. All Bellini Appliances are for domestic use only.
Never Do:
- This appliance is not intended for use by persons (including children) with reduced physical, sensory and mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Never carry out flamable cooking under the appliance
- The exhaust from the range hood must not be discharged into any heating flue, which may carry combustion products from other sources.
- Do not leave lit gas burners exposed due to the rof fire.
Always Do:
- Packaging materials (eg; polystyrene and plastic items) must be kept out of reach of babies or young children at all times due to risk of suffocation.
- Young children should be supervised to ensure that they do not play with the appliance.
- Ensure the range hood is switched off before carrying out maintenance, to avoid any possibility of electric shock.
- Grease filters must be removed every four weeks (maximum) for cleaning to reduce the risk of fire.
- There must be adequate ventilation of the room when the range hood is used at the same time as appliances burning gas or other fuels.
- Always cover lit gas burners with pots or pans when range hood is in use.
- Always switch off gas burners before you remove pots or pans.
- If the supply cord is damaged, the cord must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard
- Plug must be accessible after installation.
Safety instructions
Never Do:
- This range hood cannot be installed for outdoor use.
- It is prohibited to fit the range hood over a solid fuel stove
- This appliance must not be connected to a chimney or vent flue which is in use.
- This appliance is not to be vented into the roof cavity, must exit into open air.
- Exhaust air must not be discharged into a wall cavity, unless the cavity is designed for the purpose.
- This appliance should not be connected to ducting which ventilates rooms with fire places.
- Range hoods and other cooking fume extractors may adversely affect the safe operation of appliances burning gas or other fuels (including thosee in other rooms) due to back flow of combustion gases. These gases can potentially result in carbon monoxide poisoning. After installation of a range hood or other cooking fume extractor,the operation of open flued gas appliances should be tested by a competent person to ensure that back flow of combustion gases does not occur.
Always Do:
- Attention should be given to ensure that any applicable regulations concerning discharge of exhaust air are fulfilled.
- This appliance should be installed and maintained by a suitably qualified and competent person in accordance with the relevant safety regulations.
- Before connecting the appliance to the mains supply, ensure that the voltage and frequency details on the rating plate are consistent with the source of supply.
This product must not be disposed together with domestic waste. This product
has to be disposed at an authorised place for recycling of electrical and
electronic appliances.
**** By collecting and recycling waste, you help save natural resources, and
make sure the product is disposed in an environmental friendly and healthy
way.
BRA603SCB, BRA603SCB-F
Component list:
- Upper decorative chimney bracket
- Upper decorative chimney (Inner)
- Lower decorative chimney bracket
- Lower decorative chimney (Outer)
- Air outlet with flag
- Hood mount bracket
- Main body
- Grease mesh filter
*Maximum extension of upper and lower chimney is 780mm
Accessories bag
Technical data:
Power supply: 220 – 240v, 50Hz :
BRA603SCB(-F) 1×1.5W LED Light
ILCOS D code for this light is: DSS-1.5/65-S-120/33
Motor: 110W
Length of power cord: 1.5m
Air outlet diameter: 150mm
Operation Mode
Your range hood can be operated in two optional modes, choose the mode
suitable for your kitchen before installation.
Air Extraction
For air extraction mode, a ducting
kit is required, the air is drawn in and cleaned by the grease filters and
directed outside.
Ducting must be vented to outside atmosphere.
Air Recirculation For air recirculation mode,
charcoal filter is a must to eliminate cooking smells.
The air is drawn in and cleaned first by the grease filters and then charcoal filter. The cleaned air is then re-circulated back into kitchen through grilles on the upper decorative chimney.
Installation
Dimensions:
BRA603SCB
BRA603SCB-F 
Warning:
Check that the installation complies with the standards of local building, gas
and electrical authorities. Before connecting to the mains supply ensure the
mains voltage corresponds to the voltage on the appliance rating plate inside
the range hood.
When installing the range hood, make sure you adhere to the minimum and
maximum distances from the range hood base to the cooktop hob surface.
Hints for exhaust duct installation
The following rules must be strictly followed to obtain optimal air extraction
- Keep exhaust duct short and straight
- Do not reduce the size or restrict exhaust duct
- When using flexible duct always install the duct pulled taut to minimize pressure loss
- Failure to observe these basic instructions will reduce the performance and increase noise levels of the range hood
Ensure the exhaust ducting selected for installation complies with relevant standards and is fire retardant.
-
Using a spirit level mark a vertical centre line on the wall where the hood is to be positioned, and a horizontal line where the hood base will be.
NOTE: The distance from the horizontal line to an electrical cooktop underneath must be minimum of 600mm & 650mm Free spaceto the gas cook top and a maximum height of 750mm (refer to table below).
*If the instructions of the hob specify a greater
distance than the minimum above, then that shall be the minimum height for
installation -
After confirming the installation height and location of the installation holes, drill 9 holes on the wall, insert the dry wall anchors plugs, use 5 screws (ST4*40mm) to fix the hood mount bracket and the upper decoration chimney bracket on the wall, pay attention to ensure the level of the fuselage.
-
Fix the air outlet to t he rangehood with 2 screws (ST4*8mm),then install the foil pipe with strap.
-
Then install the rangehood on the hood mount bracket, and usi ng 2 screws (ST4*30mm) to fix the rangehood.
-
Use 2 screws (ST4*8mm) to fix the lower decorative chimney bracket on the lower chimney, and pay attention to ensure that the upper decorative chimney can be freely telescoped inside.
-
Then install the decorative chimney on the rangehood, fix the outer decorative chimney on t he rangehood with 2 screws (ST48mm) and fix it o n the wall with 2 screws(ST440mm), and pull the foil pipe out of the room.
-
Pull the upper decorative chimney up to the position of the upper decorative chimney bracket and fix it on the upper decorative chimney bracket by using 2 sctews (ST4*8mm).
Charcoal filter Installation
Install the charcoal filter into the range hood, the specific installation
method is shown in the following iamge. 
Start Using Your Range Hood
Push button
Off button
It’s used for turning off the fan.
Low Speed button
It’s used for Ventilation on the kitchen. It is suitable for simmering and
cooking which do not make much steam.
Medium Speed button
Airflow speed is ideally for ventilation in standard cooking operation.
High Speed button
When high density of smoke or steam produced, press high-speed button for
highest effective ventilation.
Light button
Turn on or off the light
Maintenance and cleaning
Caution:
- Before maintenance or cleaning is carried out, the range hood should be disconnected from the main power supply. Ensure that the range hood is switched off at the wall socket and the plug removed.
- External surfaces are susceptible to scratches and abrasions, so please follow below instruction to ensure the best possible result without damage.
GENERAL
Cleaning and maintenance should be carried out with the appliance cold
especially when cleaning
Avoid leaving alkaline or acid substances (lemon juice, vinegar etc.) on the
surfaces
STAINLESS STEEL
The stainless steel must be cleaned regularly (e.g. weekly) to ensure long
life expectancy.
Dry with a clean soft cloth. A specialized stainless steel cleaning fluid may
be used.
NOTE: Ensure that wiping is done along with the grain of the stainless
steel to prevent any unsightly scratching patterns from appearing.
CONTROL PANEL SURFACE
The inlay control panel can be cleaned using warm soapy water. Ensure the
cloth is clean and well wrung before cleaning. Use a dry soft cloth to remove
any excess moisture left after cleaning.
Important
Avoid using harsh cleaning chemicals, strong household detergents or products
containing abrasives as this will affect the appliance appearance and
potentially remove any printing of artwork on the control panel and will void
manufactures warrantee
GREASE MESH FILTERS
The mesh filters can be cleaned either by hand or in the dishwasher. After
cleaning ensure that the filters are completely dry before refitting.
– By hand: Soak in warm water and a neutral washing up liquid. For stubborn
grease stains use a soft nylon brush or sponge to help remove these stains.
(Leave to dry naturally out of direct sun light)
– In a dishwasher: Ensure that placement of the filters is made so as to not
impede the function of the spray arm.
Washing the filters in a dishwasher may cause discoloration of the aluminum
inner mesh over time although it will not affect their performance. Filters
should be washed separately to crockery and kitchen utensils, it is advisable
not to use rinse aid.
Replace the LED light
Noted: Switch the unit off and unplug the appliance.
- Remove two grease mesh filters
- Method one: Press the spring plates on both sides of LED lights inward with a tool or hand until the light is pressed out (see Pic a).The pull out the light link wire and unplug the terminal of the light link wire slowly(see Pic c). Method two: Use a flat-head screwdriver to pry out the light along the bottom hole of the LED, then pull out the light link wire and unplug the terminal on the light link wire slowly (see Pic c).
- Install it back in reverse step.
Important
When handling the light, make sure it is completely cool down before any
direct contact to hands.
WARRANTY
1.1 In this warranty:
1.1.1 Australian Consumer Law means the law as set out in Schedule 2 of the
Competition and Consumer Act 2010;
1.1.2 Company means GSM Retail Australia Pty Ltd ABN 53 007 682 475 of 142-144
Fullarton Road, Rose Park SA 5067. Telephone 1300 373 199. Email
admin@gsmretailgroup.com
1.1.3 Consumer means a “consumer” as that term is defined in Section 3 of the
Australian Consumer Law as the original purchaser of a Bellini product;
1.1.4 Consumer Guarantees means the guarantees under the Australian Consumer
Law;
1.1.5 You means the Consumer.
1.2 Nothing in this warranty affects any person’s rights under the Australian
Consumer Law. The benefits to any Consumer under this warranty are in addition
to the rights and remedies available under any Consumer Guarantees.
1.3 Subject to the other clauses of this warranty, the Company warrants to the
Consumer that the Bellini product will be free of manufacturing defects and
will perform to the Company’s specifications.
1.4 The benefit of this warranty extends only to the Consumer as original
purchaser of a Bellini product which is installed in a domestic household
area.
The in Home warranty does not apply to Commercial and or industrial usage. Please See 1.7.7 for additional information
1.5 This warranty commences on the date of purchase of the Bellini product by
the Consumer and continues for the benefit only of the Consumer until the
expiry of three (3) year (Warranty Period).
1.6 If within the Warranty Period a manufacturing defect is discovered in the
Bellini product or it fails to perform to the Company’s specifications as a
result of some defect in materials, components or workmanship (Defect) then
the Company will, at its option, repair the Bellini product or supply a
replacement Bellini product free of charge. A replacement Bellini product may
differ from the original product purchased by the Consumer.
1.7 This warranty will not apply to any Bellini product:
1.7.1 Installed by any person other than a qualified tradesperson; or
1.7.2 Subjected to misuse, neglect, negligence or accidental damage; or
1.7.3 Operated in any way contrary to any operating or maintenance
instructions; or
1.7.4 Improperly handled, installed or maintained; or
1.7.5 Altered or modified prior to or after installation; or
1.7.6 Damaged directly or indirectly by power surges, electrical storm damage
or connection to incorrect power supply
1.7.7 Industrial and or Commercial usage is inclusive of staff areas in
office/ shop environments, hotel/ motel or other similar accommodation or
rental type properties including Bed and Breakfast establishments.
The Australian Consumer Law requires the inclusion of the following statement
with this warranty:
Our goods come with guaranteed that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not amount to a major
failure.
1.8 You must provide proof of your purchase of the Bellini product and the
date of purchase in order to obtain the benefit of this warranty .
1.9 If you live outside the service area of the Company or one of its service
agents, this warranty does not cover the cost of transport of the Bellini
product for service nor the service agent’s traveling costs to and from your
home.
1.10 If you are required to transport the Bellini product to the Company or
its service agent, you must ensure it is safely disconnected by a qualified
tradesman and securely packed and insured. The Company does not accept any
responsibility for loss or damage of the Bellini product prior to it being
received by the Company or its service agent.
1.11 You will be responsible for all costs of returning a Bellini product to
the Company and for redelivery of the Bellini product by the Company (whether
it is the original or a repaired and/or a replacement Bellini product) and for
any other expenses you incur in claiming under this warranty.
1.12 The Company or its service agent will examine any Bellini product and if
the Company determines that it is defective through no fault of the Owner and
is otherwise undamaged, the Company will repair or replace the Bellini product
in accordance with this warranty.
DO NOT SEND IN THIS WARRANTY Fill
out the following details and file with your purchase invoice for safe
keeping.
RETAIN & FILE WITH YOUR RECEIPT
Your Purchase Receipt/Invoice is proof of date of purchase. If you are unable
to establish the date of purchase, or if the fault is not covered by this
warranty, or if the product is found to be in working order, you will be
required to bear all service call charges.
GSM Retail Australia Pty Ltd reserves the right to discontinue items, modify
designs and change specifications without incurring obligation.
Whilst every effort is made to ensure that descriptions, specifications and
other information in this publication is correct, no warranty is given in
respect thereof and the company shall not be liable for any errors therein.
Purchased from:
Co. Name:
Address:
Date of Purchase:
Serial number:
NOTE: Consistent with our continuing product development policy,
improvements may have been made which render the contents of this packaging
slightly different to that shown.
For Warranty and technical queries: Australia 1300 373 199 : New Zealand 0800
764 912
GSM RETAIL AUSTRALIA PTY LTD
The GSM Retail Australia Pty Ltd Group Companies has a policy of continual
improvement throughout the product range.
As such the unit contained within may differ slightly from the unit
illustrated on the pack.
MADE IN CHINA for the GSM Retail Australia Pty Ltd. Group Companies
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>