logitech MK255 Wireless Keyboard and Mouse Combo User Manual
- June 3, 2024
- Logitech
Table of Contents
logitech MK255 Wireless Keyboard and Mouse Combo
Welcome
Thank you for choosing this wireless product. To ensure optimum performance
and safety, please read these instructions carefully before operating this
product. It is strongly recommended you keep this manual for Mure’s reference.
issue? Let us help you right away
Our goal is your complete satisfaction. That’s why we offer you a satisfaction
guarantee. if you have any issues at all, please reach out to us right away
cs.btios@hotmail.com
Package Content &
- 1 xwirelessKeyboardMK255
- 1 x wireless Moose TM250G
- 1 user manual
Keyboard Product specifications
- KeyType: Craterkeys
- Battery Type: 2″AAA battery
- USB 2.0 interface. pulg&play, no driver required
- Compatible.ilhW111XP, W111Vista. Win7. Win8. Win8.1. We 10. Mac
- 0peratingVoltage: 3V
- Operating Current: 5mA
- SleepingCurrent:0.11mA
- sleeping time: 6minutes
- Keystroke: 50±5gf
- Key life: 10millionkeystrokes
- Dimension: 410″115″22mm
- Weight: 356g
Keyboard Instructions
The wireless keyboard uses two AAA batteries (not included). Open the battery
compartment cover. install the battery in the compartment, and makes sure the
polarity of the battery is correct. the positive(+)and negative(-)ends of
battery must
match the post!Jve(+)andnegative(- )marlcingsinthebatteryhousing .
Keyboard Re-pairing Method
- UnplugtheUSB receiver.
- Press”Esc the keyboard light will be on, then plug the USB receiver into the USB port, keep the keyboard and USB receiver distance within 20cm, and the light will be off if successfully paired.
IMPORTANT NOTE
You must complete all operations in step 2 within 10 seconds after you
press”ESC”+”=”.
Mouse Re-pairing Method
Pressandholding ” leflkey+centerkey+rightkey “tore-<onnect
Functional Zone
- Press the’ Num Lock” button, and the LEO of “1” will tum off and the numeric zone will change to the functional zone.
- Numbers “2”, ‘ 4″, “and 6”, are for down, left, right, and up directions.
- Numbers “1”, “3”. “and 7”, are for “End”. “Page Down”, “Home”. “Page Up”.
- Number “O’ for ‘ insert”.
Num Indicator. It will show Red color when the numeric zone is on and the functional zones are off. Caps Lock Indicator. It will show Red color when the Caps zone is on and the functional zone is off. Low Power Indicator. The Low Power LEO will flash when the voltage is lower than This will happen when you wake up the keyboard after sleeping or when you change the battery.
Wireless Mouse
Product Specifications
- WorkingFrequency: 2.4GHz
- 0perationVoltage: 1. SV
- Battery Type: 1 AA battery
- Current Dissipation: 1.5V-14mA
- StandbyCurrent:0.5-2.0mA
- SleepingCurrent:<0.1mA
- Sleeping Time: 15 Minutes
- OPI Resolution: 1400
- Working Distance: s10M
- Key Life: 3 million
- Dimension: 111·so•29mm
- Weight:58g
Installation
Combined Keys
About after-e ales problems
- 12MonthsWarranty
- If you have any problem, please feel free to contact us. Manufacturer Email:cs.btios@hotmail.com
FCC Caution
Labeling requirements
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Information to user
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Information to the user
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable device
The device has been evaluated to meet the general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>