TEMEISHENG KG15 200 Power Speaker User Manual
- June 14, 2024
- TEMEISHENG
Table of Contents
TEMEISHENG KG15 200 Power Speaker
The product is a wireless device that operates using Bluetooth technology. It has the following specifications:
- Bluetooth version: 5.0 (BR, EDR, BLE)
- Bluetooth profiles: SPP, A2DP, AVRCP
- Bluetooth frequency range : 2402 MHz – 2480 MHz
- Bluetooth Max. Transmit power : 38m (standalone mode)
Product Usage Instructions
To use the product, please follow the steps below:
- Make sure the product is charged or connected to a power source.
- Turn on the product by pressing the power button or following the manufacturer’s instructions.
- Enable Bluetooth on your device (e.g., smartphone, tablet, computer).
- Search for available Bluetooth devices on your device’s Bluetooth settings.
- Select the product from the list of available devices.
- If prompted, enter a passcode or PIN to pair the product with your device.
- Once paired, you can use the product for various purposes depending on its supported Bluetooth profiles:
- SPP (Serial Port Profile): Use the product for serial communication with compatible devices.
- A2DP (Advanced Audio Distribution Profile): Stream high-quality audio from your device to the product.
- AVRCP (Audio/Video Remote Control Profile): Control playback functions (play, pause, skip) of media on your device using the product’s controls.
- To disconnect or turn off the product, follow the manufacturer’s instructions or turn off Bluetooth on your device.
Please refer to the user manual for more detailed instructions and troubleshooting tips.
BACK PANEL INSTRUCTIONS
- Digital LED display
- Mode: USB/TF/BT input choice
- Recording sound and playing
- Cycle playing one or all. Press 2s to open/close micrphone priority.
- Previous song. Press 2s to open/close accompany.
- Pause/Play
- Next song
- Music master volume
- Bass control
- Treble control
- Microphone bass control
- Microphone treble control
- Microphone delay control
- Microphone echo control
- Microphone volume control
- Guitar volume control
- Guitar jack input
- Wired microphone 1st input
- Wired microphone 2nd input
- U disk 2nd input
- TF card input
- U disk 1st input
- Monitor earphone output
- Coaxial input
- Audio signal output
- AUX device RCA input
- Extral DC 12V power input
- Battery status indicator
- Backup F30A fuse
- Work F30A fuse
- Battery and AC power switch
- AC power line input
Wireless specification
- Bluetooth version: 5.0 (BR, EDR, BLE)
- Bluetooth profile: SPP, A2DP, AVRCP
- Bluetooth frequency range: 2402 MHz – 2480 MHZ
- Bluetooth Max. Transmit power: <10dBm
- Modulation Type: GFSK, π/4 DQPSK, 8DPSK
- BT distance: > 38m (standalone mode)
FCC Compliance Statement
This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.