Guarder G10 Keyless Entry Door Lock Set User Manual
- June 15, 2024
- Guarder
Table of Contents
QUICK SET UP
User Manual
G10 Keyless Entry Door Lock Set
The default Master Code is 123456
It is required that you change it to a code of your own before programming.
Blue light: programming status / Purple light flash&short beep: successful
entry / Red light: error
Manually lock from outside: Long press “ ” 3 seconds
Programming Code = PC USER Code = UC
Notes:
- Beeps only sound when the Silent Mode is disabled.
- If the indicators flash red light, it means your setting failed and it will require to re-enter master mode if you would like to continue your programming.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>