HiBoost Pro20T Professional Booster Owner’s Manual

: September 29, 2024
: HiBOOST

Table of Contents

Description
Key Features
How it Works
Specification
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HiBoost Pro20T Professional Booster

HiBoost Pro20T Professional Booster

Description

The Hi Boost six-band signal booster Pro25T-6S-BTW is designed to directly enhance 2G, 3G, 4G, and 5G mobile signals for end users. It not only provides remote monitoring but can also be controlled remotely to achieve frequency band switching and frequency band gain adjustment. Covering an indoor area of up to 35,000 square feet, it guarantees a superior communication experience, delivering clearer calls and faster data speeds than ever before.

Key Features

Six band design covers all US and Canadian carriers
Compatible with NR600, Cellular 800, PCS, AWS, Upper and Lower 700 LTE Bands
3.5″ color touchscreen LCD
Manual and automatic gain control functions
Remote monitoring via Bluetooth, Wifi and Ethernet
Setup and monitoring via a mobile app
Self-oscillation protection
Quality built, strong and durable construction
Conforms to ETSI 3GPP standards

How it Works

Pro25T-6S-BTW Signal Booster
Outdoor Antenna
Indoor Antenna.
Cable

Specification

Working Band	Band 71 / Band 12/17 / Band 13 / Band 5 / Band 2/25 / Band 4/66
UL Frequency Range	663-698 / 698-716 / 776-787 / 824-849 / 1850-1915 /

Users of this product are cautioned to comply with following:

Booster should be installed with good grounding and lightning protection.
The power supply AC input voltage shall not exceed 240 VAC. Any maintenance operation shall be carried out only after cutting off power in advance. Only professional service is authorized for maintenance.
Do not dismantle the amplifier or maintain or replace any accessories without factory authorization. The equipment may be damaged and there is an electric shock hazard.
Do not open the booster, touch any module inside the booster, or open the cover of any module to touch the internal electronic components. The components can be damaged due to electrostatic discharge.
Please keep away from heating-equipment, because the booster will dissipate heat during operation. And do not cover booster with anything that influences heat-dissipation.

WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED
INSTALLERS . You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. Unauthorized use may result in significant forfeiture penalties. including penalties in excess of $100,000 for each continuing violation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

WARNING: E911 location information may not be provided or may be inaccurate for calls served BY USING THIS DEVICE.

Notice: When this device is operating in the 1710-1755 MHz band, the maximum antenna height should be a fixed height of 10 meters above ground. To meet the FCC EIRP limit, the antenna used with this amplifier must be connected by a cable with a minimum signal loss such that the combination of the antenna gain and cable loss shall not exceed 3 dB.