Toyama TBT58LM420X-K Cordless Lawn Mower Owner’s Manual

: September 30, 2024
: Toyama

Table of Contents

Toyama TBT58LM420X-K Cordless Lawn Mower
FAQs
PRODUCT INFORMATION
SAFETY SYMBOLS
SPECIFICATIONS
LAWN MOVER PARTS POSITION
CARES WHEN OPERATING YOUR LAWN MOWER
BATTERY USE
USING THE BLADE
INSPECTION BEFORE OPERATING
MOWER ASSEMBLY
ADJUSTING THE CUTTING HEIGHT
OPERATING THE EQUIPMENT
MAINTENANCE SCHEDULE
WARRANTY TERM
INFO
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Toyama TBT58LM420X-K Cordless Lawn Mower

FAQs

Q: What should I do if I encounter a problem with the product?
- A: Consult your authorized Toyama dealer for assistance.
Q: How can I ensure safety while operating the lawn mower?
- A: Wear safety gloves, read the manual, and follow all safety warnings provided in the manual.

PRODUCT INFORMATION

Thank you for purchasing the TOYAMA product.
This manual covers the operation and maintenance of your product. The information and specifications included in this publication were in effect at the time of approval for printing. No part of this publication may be reproduced without written permission.
This manual should be considered a permanent part of this product and should remain with it. The illustration may vary according to the model.
Keep this owner’s manual handy, so you can refer to it at any time. This owner’s manual is considered a permanent part of the product and should remain with the product if resold.
If a problem should arise, or if you have any questions about the product, consult your authorized TOYAMA dealer.

SAFETY SYMBOLS

The following symbols are intended to remind you of the safety precautions to be followed.

SPECIFICATIONS

LAWN MOVER PARTS POSITION

SWITCH LEVER;
ON/OFF SWITCH;
SAFETY KEY;
WIRE CLIP;
WIRE;
GRASS COLLECTION BAG INDICATOR PLATE;
GRASS COLLECTION BAG;
REAR WHEELS;
FRONT WHEELS;
FRONT WHEELS COVER;
UPPER HANDLE;
QUICK CLIP;
LOWER HANDLE;
EJECTOR FLAP;
HANDLE;
CUTTING HEIGHT ADJUSTMENT LEVEL;
BATTERY COVER;
BATTERY BOX;
BLADE;

CARES WHEN OPERATING YOUR LAWN MOWER

READ THE MANUAL CAREFULLY;
BE SURE TO KEEP THIS MANUAL ACCESSIBLE SO THAT YOU CAN CONSULT ANY DOUBTS;
NEVER USE THE PRODUCT UNDER THE FOLLOWING CIRCUMSTANCES:
- (A) WHEN THE TERRAIN IS SLIPPERY OR WHEN IT CAN NOT MAINTAIN A STABLE AND SAFE POSITION;
- (B) AT NIGHT OR WHEN YOU HAVE AN UNCLEAR VISIBILITY OF THE AREA WHERE THE EQUIPMENT WILL BE OPERATED;
- (C) UNDER ADVERSE WEATHER CONDITIONS (RAIN, STORMS, STRONG WINDS);
NEVER TAKE OR TRANSPORT A LAWN MOWER WHILE IT IS OPERATING;
WARNING
DO NOT OPERATE THE LAWN MOWER WITH BARE FEET OR WITH SANDALS. ALWAYS WEAR CLOSED SHOES AND LONG PANTS;
WHEN USING THE PRODUCT, MAKE SURE THAT CHILDREN, UNAUTHORIZED PERSONS, OR ANIMALS ARE AT A SAFE DISTANCE, STOP THE CUTTER IF SOMEONE ENTERS THE CUTTER AREA;
CAREFULLY INSPECT THE LAWN MOWER AND THE AREA WHERE THE EQUIPMENT WILL BE USED. CLEAR THE AREA OF OBJECTS LIKE STONES, TOYS, YARNS, BONES, STICKS, ETC. THAT CAN BE PICKED UP AND THROWN BY THE BLADE;
DO NOT PUT YOUR HANDS OR FEET NEAR OR UNDER ROTATING PARTS. KEEP AWAY FROM THE DISCHARGE OPENING ALWAYS;
DO NOT OPERATE THE LAWN MOWER WITHOUT PROPER COVERS, PLATES, GRASS CATCHER, OR OTHER PROTECTIVE AND SAFETY DEVICES ON SITE;
WARNING
OPERATE WITH UPRIGHT POSTURE. MAINTAIN PROPER SUPPORT AND BALANCE AT ALL TIMES;
TURN OFF THE ENGINE WHENEVER YOU LEAVE THE MACHINE ALONE, BEFORE CLEANING THE CUTTER OR UNCLOGGING THE BLADE;
ONLY WORK IN DAYLIGHT OR WITH GOOD LIGHTING;
DO NOT OPERATE THE CUTTER UNDER THE INFLUENCE OF ALCOHOL, DRUGS OR OTHER MEDICINES THAT MAY CAUSE DROWSINESS OR AFFECT ITS ABILITY TO OPERATE THE MACHINE SAFELY;
MAKE SURE YOU ARE PROPERLY FITTED, HOLD FIRMLY ON THE HANDLE, AND NEVER RUN WHEN OPERATING THE LAWN MOWER;
IF THE EQUIPMENT STARTS TO VIBRATE ABNORMALLY, STOP THE ENGINE AND IMMEDIATELY CHECK THE CAUSE;
WARNING
IF THE BLADE HITS AN OBJECT, DESCONECT DE POWER, AND INSPECT THE BLADE AND CUTTER. IF DAMAGE OCCURS, REPAIR THEM BEFORE OPERATING AGAIN;
A HIGH GRASS CAN HIDE OBSTACLES, BEWARE OF HOLES, GROOVES, OR BUMPS;
DO NOT CUT OVER STEEP SLOPES;
KEEP CHILDREN OUT OF THE CUTTING AREA AND UNDER THE CARE OF A RESPONSIBLE ADULT. NEVER ALLOW CHILDREN AND UNAUTHORIZED PERSONS TO OPERATE THE LAWN MOWER;
NEVER CHANGE THE SAFETY DEVICES. CHECK REGULARLY FOR PROPER OPERATION;
NEVER REMOVE THE DECALS THAT COME WITH THE PRODUCT;
WARNING
GRASS CATCHER BAGS ARE SUBJECT TO WEAR OUT, DAMAGE, AND DETERIORATION, WHICH MAY EXPOSE MOVING PARTS OR ALLOW OBJECTS TO BE THROWN. CHECK FREQUENTLY. WHEN STORING THE EQUIPMENT, ALWAYS MAKE SURE THAT THE GRASS CATCHER IS EMPTY;
USING PERSONAL PROTECTIVE EQUIPMENT IS VERY IMPORTANT FOR SAFE WORK;
DO NOT OPERATE IN WET AREAS OR UNDER RAIN;
DO NOT CUT IN REVERSE;
ALWAYS DISCONNECT DE POWER CABLE BEFORE CLEANING DEBRIS FROM THE BLADE, AND BEFORE CHECKING, CLEANING, OR WORKING WITH THE LAWN MOWER;
ALWAYS KEEP NEAR THE NECESSARY TOOLS FOR PERIODIC CHECKS OR MAINTENANCE;
WARNING
KEEP FEET AND HANDS AWAY FROM THE CUTTING BLADE WHEN OPERATING;
DO NOT OPERATE ON A SLOPE HIGHER THAN 15 DEGREES;
NEVER WEAR WIDE CLOTHING, SHORTS, OPEN SHOES, LOOSE HAIR, ETC. ALWAYS USE THE RECOMMENDED PROTECTIVE EQUIPMENT;
PAY ATTENTION TO THE WEAR OF PARTS. IF THERE IS ANY ABNORMALITY OF THE MACHINE, STOP THE OPERATION IMMEDIATELY AND CHECK THE MACHINE WITH CARE. TAKE THE MACHINE TO AN AUTHORIZED DEALER IF NECESSARY. NEVER OPERATE A MACHINE THAT IS NOT WORKING PROPERLY;
ALWAYS MAKE SURE TO INCLUDE THIS MANUAL WHEN SELLING, LENDING, OR TRANSFERRING OWNERSHIP OF THIS PRODUCT;
WARNING

BATTERY USE

ONLY RECHARGE WITH A COMPATIBLE CHARGER, AN INADEQUATE CHARGER MAY CAUSE THE RISK OF FIRE;
WHEN THE BATTERY IS NOT IN USE, KEEP IT AWAY FROM METAL OBJECTS, SUCH AS CLIPS, COINS AND KEYS, WHICH MAY CONNECT ONE TERMINAL TO ANOTHER, THE SHORT CIRCUIT MAY CAUSE BURN OR FIRE;
DO NOT EXPOSE THE BATTERY TO EXCESSIVE TEMPERATURES, EXPOSURE TO FLAME OR TEMPERATURES ABOVE 130 DEGREES MAY CAUSE EXPLOSIONS;
FOLLOW THE CHARGING INSTRUCTIONS AND DO NOT CHARGE THE BATTERY OUTSIDE THE SPECIFIED TEMPERATURE RANGE, IMPROPER CHARGING MAY DAMAGE THE BATTERY AND INCREASE THE RISK OF FIRE;
WARNING

USING THE BLADE

THE BLADE HAS EDGES AND CAN CAUSE ACCIDENTS, ALWAYS USE GLOVES;
ALWAYS KEEP THE BLADE SET SCREW SECURELY IN PLACE;
THE VIBRATION IS THE RESULT OF A BLADE THAT IS NOT PROPERLY BALANCED;
DO NOT SHARPEN THE BLADE WHILE IT IS MOUNTED ON THE MACHINE;
TO CLEAN THE BLADE USE SOAP, WATER, AND A BRUSH;

USING THE CUTTING BLADE

IF THE BLADE IS WARPED, CRACKED, CRUMPLED, OR OTHERWISE DAMAGED, REPLACE IT;
USE A FILE TO SHARPEN THE BLADE, ENSURING THAT BOTH SIDES ARE SHARPENED THE SAME;
MAKE SURE THE BLADE IS BALANCED. USE A SCREWDRIVER AND KEEP THE BLADE PARALLEL TO THE HORIZONTAL PLANE. THE BALANCED BLADE WILL BE PARALLEL TO THE GROUND, OTHERWISE, THE HEAVY SIDE WILL ROTATE TOWARD THE GROUND. SHARPEN THE HEAVY SIDE UNTIL THE BLADE IS BALANCED;

INSPECTION BEFORE OPERATING

CHECK FOR SIGNS OF MALFUNCTION;
IF THE POWER CABLE IS DAMAGED, IT MUST BE REPLACED BY THE MANUFACTURER AUTHORIZED AGENT, OR QUALIFIED PERSON TO AVOID RISK;
ACCORDING TO BRAZILIAN STANDARDS, IT IS NECESSARY TO INSTALL A RESIDUAL CURRENT DEVICE IN ELECTRICAL INSTALLATIONS. THE DEVICE PROTECTS THE USER AGAINST THE RISK OF ELECTRIC SHOCK, WITH A CURRENT OF 30 MA. CONSULT AN ELECTRICIAN AND CHECK WHETHER YOUR ELECTRICAL INSTALLATION HAS THIS TYPE OF PROTECTION
WARNING: MAKE PERIODIC INSPECTIONS TO ENSURE SAFE AND EFFICIENT OPERATION / FOR A COMPLETE INSPECTION OF OUR MACHINE, PLEASE CONTACT A DEALER.
CHECK THE CONDITION OF THE BLADE;
VERIFY TIGHTNESS OF NUTS AND BOLTS;
CHECK THE CORRECT FIT OF COVERS AND CAPS;
WARNING: PREVENTIVE MAINTENANCE ENSURES PERFECT OPERATION AND LONGER ENGINE LIFE.

MOWER ASSEMBLY

FIT THE TWO LOWER RODS INTO THE BODY OF THE LAWN MOWER;
FIT THE UPPER ROD INTO THE LOWER ONE. MAKE SURE THE HOLES ARE ALIGNED AND SECURE THE ASSEMBLY USING WING NUTS AND SCREWS. TIGHTEN THE NUTS;
MOUNT THE DRIVE SWITCH ON THE TOP ROD. MAKE SURE THE SWITCH IS PROPERLY FITTED;
WARNING: POORLY FASTENED HANDLE CAN CAUSE ACCIDENTS / WHEN SHORTENING OR LENGTHENING THE HANDLE, BE CAREFUL NOT TO DAMAGE THE CABLES / THE CABLE BEND WILL NOT WORK CORRECTLY.
PLACE AND TIGHTEN THE CLIP ON BOTH LOWER RODS;
INSERT THE HANDLE INTO THE SLOTS ON THE PICK-UP AND TIGHTEN TO LOCK IT;
MOUNT THE BAG ON THE COLLECTOR;
RAISE THE PROTECTIVE COVER, ALIGN THE COLLECTOR COUPLINGS AND TIGHTEN;
WARNING

USING THE LAWNMOWER WITH THE GRASS CATCHER BAG

LIFT THE BACK COVER FIXED ON THE CUTTER;
INSERT THE GRASS CATCHER BAG, FITTING IT CORRECTLY INTO THE LAWN MOWER;
GENTLY RELEASE THE BACK COVER OVER THE GRASS CATCHER BAG;
WARNING: BEFORE OPERATING THE LAWN MOWER, MAKE SURE THE GRASS CATCHER BAG IS FIT PROPERLY/ VERIFY IF THE PURCHASED MODEL IS EQUIPPED WITH THE GRASS CATCHER BAG.

ADJUSTING THE CUTTING HEIGHT

CHOOSE THE HEIGHT BEFORE START THE WORK;
ADJUST THE HEIGHT OF ONE OF THE PAIRS OF WHEELS ACCORDING TO THE DESIRED CUTTING HEIGHT
ADJUST THE HEIGHT OF THE OTHER PAIR OF WHEELS;
WARNING: MAKE SURE BOTH SIDES OF THE SHOFT ARE AT THE SAME HEIGHT.

OPERATING THE EQUIPMENT

BEFORE USING THE MACHINE, CONSULT THE SAFETY STANDARDS AND USE THE RECOMMENDED SAFETY EQUIPMENT;
WITH THE EQUIPMENT TURNED OFF AND THE ELECTRICAL CORD REMOVED FROM THE SOCKET, ADJUST THE CUTTING HEIGHT. MAKE SURE BOTH SIDES OF THE SHAFT ARE AT THE SAME HEIGHT;
POSITION YOURSELF BEHIND THE LAWN MOWER;
WARNING: THE CUTTING BLADE WILL ROTATE WHEN THE ENGINE IS STARTED / NEVER PLACE YOUR FEET OR HANDS UNDER THE MOWER.
TO OPERATE THE MACHINE, PRESS THE SWITCH SAFETY LOCK (1) AND, WITH IT PRESSED, ACTIVATE THE SWITCH (2), HOLDING IT UNTIL THE END OF THE OPERATION;
TO TURN OFF THE MACHINE, RELEASE THE SWITCH AND WAIT FOR A FEW SECONDS UNTIL THE BLADE STOPS ROTATING. DISCONNECT THE MACHINE FROM THE ELECTRICAL NETWORK;
TO DISABLE THE EQUIPMENT, RELEASE THE SECURITY LEVER;
WARNING

MAINTENANCE SCHEDULE

KEEP THE AIR INTAKE CLEAN AND VENTILATION HOLES FREE OF DEBRIS TO PREVENT
CLEAN WITH A SPONGE AND A LITTLE SOAP. DO NOT USE A RUNNING WATER HOSE OR OTHER CLEANING LIQUIDS;
IF THE LAWN DOES NOT WORK, TURN THE SWITCH TO THE OFF POSITION AND DISCONNECT THE EXTENSION CORD, FIRST FROM THE ELECTRICAL OUTLET, THEN FROM THE LAWN. INSPECT THE SOURCE AND CHECK WHETHER IT IS ENERGIZED OR HAS BLOWN FUSES OR DISCONNECTED SWITCHES. IF IT STILL DOES NOT OPERATE, TAKE THE CHAINSAW TO AN AUTHORIZED TECHNICAL ASSISTANCE CENTER;
WARNING
CHECK THE CONDITION OF THE CUTTING BLADE. IF IT IS WORN, BROKEN, OR CRACKED, IT MUST BE REPLACED;
TO CHANGE THE BLADE, YOU MUST WEAR GLOVES. FOLLOW THE INSTRUCTIONS IN THE NEXT PAGE;
WARNING

REPLACING THE BLADE

ALWAYS BEFORE CARRYING OUT MAINTENANCE PROCEDURES, MAKE SURE THE MOWER HAS NO BATTERY;
STAND THE MACHINE UPRIGHT, TO GET ACCESS TO THE BLADE;
LOCK THE BLADE, YOU CAN USE A PIECE OF WOOD AS A SUPPORT TO BLOCK;
WITH A WRENCH, REMOVE THE BOLT THAT SECURES THE BLADE;
WARNING: PAY ATTENTION TO THE CORRECT CUTTING DIRECTION BEFORE ASSEMBLY / WEAR PROTECTIVE GLOVES.
REMOVE THE BLADE AND PERFORM MAINTENANCE OR CHANGE;
TO REINSTALL THE BLADE, USE THE ORIGINAL SCREW BY TIGHTENING IT AND USING A SUITABLE WRENCH;
RETURN THE LAWN MOWER TO THE GROUND;
WARNING: PAY ATTENTION TO THE CORRECT CUTTING DIRECTION BEFORE ASSEMBLY / AFTER SHARPENING THE BLADE, CHECK THE CORRECT BALANCING / NEVER MOUNT THE BLADE UNBALANCED / ALWAYS WEAR GLOVES FOR THE CHANGE, THE BLADE CAN CUT / REPLACE THE BLADE WHENEVER IT IS DAMAGED / A TORQUE OF 35 N.m IS RECOMMENDED TO TIGHTEN THE CUTTING BLADE.

CLEANING THE LAWN MOWER

BEFORE CARRYING OUT ANY WORK ON THE MOWER, REMOVE THE BATTERY;
PLACE ON LEVEL GROUND WITH THE MOWER RESTED ON THE GROUND AND FREE OF OBJECTS THAT CAN BE THROWN;
USE A SPONGE AND A LITTLE SOAP. DO NOT USE A RUNNING WATER HOSE OR OTHER CLEANING LIQUIDS;
CLEAN THE BOTTOM OF THE MACHINE. MAKE SURE THE BLADE IS STOPPED AND BE CAREFUL NOT TO CUT YOURSELF;
WARNING

CLEANING THE GRASS CATCHER BAG

RAISES THE BACK COVER;
MOVE THE MANIFOLD SLIGHTLY UP;
TILT IT GENTLY BACK AND REMOVE IT;
CAREFULLY LOWER THE BACK COVER;
EMPTY THE MANIFOLD IN A SUITABLE LOCATION;
WARNING: NEVER DRAG THE CATCHER ONTO THE GROUND.
THE COLLECTOR CAN BE WASHED WITH WATER AND NEUTRAL SOAP;
ENSURE THAT THE MANIFOLD IS DRY BEFORE REINSTALLING;
LIFT THE BACK COVER;
CAREFULLY REPLACE THE GRASS CATCHER BY TILTING AND FITTING IT CORRECTLY;
BRING DOWN THE BACK COVER;
WARNING: DO NOT USE SHARP OR POINTED OBJECTS TO CLEAN THE PICKUP / DO NOT OPERATE THE CUTTER WITHOUT THE PICKUP, OBJECTS MAY BE THROWN AND CAUSE ACCIDENTS.

STORAGE

CLEAN THE GRASS CATCHER (IF EQUIPPED) AND ANY GRASS CLIPPED ON THE LAWN MOWER;
AFTER CLEANING THE MACHINE, AND WITH IT DISCONNECTED FROM THE ELECTRICAL NETWORK, DISMANTLE THE RODS;
PLACE THE MACHINE IN A CLOSED ENVIRONMENT PROTECTED FROM SUN AND HUMIDITY;
WARNING: AVOID AREAS FOR STORAGE IN HUMID ENVIRONMENTS AS HUMIDITY CONTRIBUTES TO RUST AND CORROSION / AVOID ANY AREA WITH ELEMENTS THAT PRODUCE ELECTRIC SPARKS / NEVER CLEAN THE EQUIPMENT WITH CHEMICALS OR ABRASIVES.

TRANSPORT

PUT THE ENGINE ON FLAT SURFACES TO AVOID TIPPING AND DAMAGE;
WARNING: NEVER CARRY THE MOTOR LYING DOWN OR UPSIDE DOWN.

WARRANTY TERM

This product is guaranteed against defects in material and workmanship for a legal period of three (3) months from the date of issue of the respective Sales Invoice. We undertake to repair or replace, within the period mentioned, free of charge, parts that are recognized by the Technical Department as defective, upon approval of the Warranty Request. This warranty is limited and non-transferable, valid only for the first purchaser, and covers only the product, all damages and losses resulting from misuse of the equipment are excluded. Any freight/ insurance and other costs will be borne by the buyer.

The following shall be excluded from the guarantee:

Defects caused by use, not following the instructions contained in the Owner’s Manual; accidents (falling, fire, etc.); use of non-original parts and repairs and/or maintenance carried out by unauthorized workshops and/or technicians.
Spare parts and natural maintenance such as spark plugs, lubricants, filters, fuel cap, starting cord, handles, seals, gaskets, safety devices and similar items.
Parts that suffer from natural wear and tear due to friction such as pistons, cylinders, piston rings, bearings, pins, rollers, connecting rods, crankshafts, springs, bushings, rotors and mechanical seals.
Violated products.
Products whose Certificate of Warranty is incorrectly filled in and / or without the Sales Invoice number.
NOTE: A breakdown during the warranty period does not entitle the buyer to stop payment, or discounts.
IMPORTANT: Keep the Sales Invoice, the Product Warranty Certificate and present them when you need technical assistance.
ATTENTION: Read the owner’s instruction manual and all warnings of danger and attention before operating the equipment.