meross MS600 Advanced Presence Sensor User Manual

meross MS600 Advanced Presence Sensor

Product Description

The Meross advanced Presence Sensor combines millimeter-wave Doppler radar technology with infrared motion sensors, creating a dual-detection sensor capable of recognizing biological movements, subtle motions, and presence status. Additionally, the product is equipped with a light sensor that can detect changes in ambient brightness in real-time. Once a change in biological movement or ambient brightness is detected. the sensor will promptly transmit the information to the Meross system or Matter platform.
The Meross Presence Sensor seamlessly integrates into a whole-house smart system, working in tandem with other smart devices to achieve various scene- linked applications. For instance, when someone enters a room, the sensor can trigger the automatic activation of lights: whereas during periods of inactivity, the smart system will intelligently turn off the lights, offering you a more convenient and intelligent living experience.

Safety Information

1. Make sure this device is fully plugged in and kept out of reach of children for safety concerns.
2. Do not place near heat sources or heat-producing devices.
3. Do not expose this product to mechanical shocks such as crushing, bending, puncturing, or shredding. Avoid dropping or placing heavy objects on this product.
4. Do not use this product if visible defects are observed or if it has been damaged or modified. Contact our support for assistance.
5. Do not attempt to disassemble, open, microwave, incinerate, paint, insert foreign objects into this product.
6. Attempting to open or service the unit voids all warranties, express or implied. If you experience problems with the device, discontinue use, unplug the device and contact our support for assistance.
7. No restrictions exist in the use of radio frequencies or frequency bands in all EU member states, EFTA countries, Northern Ireland and Great Britain. Operating Frequency/max output power
   2400-2483.5 MHz /20dBm

Package Content

• Infrared Motion Sensor Lens–(1)
• Pet-proof Shield Installation Point–2
• Pet-proof Shield (we suggest only installing if pets ore present or if there’s interference from robot vacuum)–3
• Light Sensor (ensure it’s not blocked)–4
• Millimeter-wove Rodar Emission Area–5
• Type-C Power Interface-6
• Button–7
• Adjustable Bracket–8

Note

1. The illustrations of the product, accessories, and user interface in the manual are schematic and for reference only. Due to ongoing updates and upgrades of the product, there may be slight differences between the actual product and the illustrations. Please refer to the actual product for accuracy.
2. The illuminance is influenced by various factors such as the nature and position of the light source, environmental conditions. lighting design, and measurement methods. Therefore, the illuminance values provided by this product are for reference only. While the sensor boasts high accuracy, real-world environmental factors can affect its performance. Therefore, it is recommended to monitor for a period of time after selecting the correct device installation location, and then adjust the settings based on the monitoring results to achieve a better user experience.

Installation Instructions

1. Download the Meross app.
2. Follow the instructions in the Meross app to complete the setup.

NOTE

1. The Matter device requires Bluetooth to set up. Please make sure the Meross app is granted to access the required system permissions, and the Bluetooth of your smart phone has been enabled.
2. If this is not the first time you’ve added this smart device, you’ll have to reset it before going any further.
3. Find more at https://www.meross.com/support

Device Installation

For installation, third-party platform usage, and scene configuration, scan the OR code to access video tutorials.

1. Unfold the bracket on the back and rotate it 90 degrees to the left.
2. Insert the Type-C power cable.
3. If wall installation is required, insert the power cord into the bottom lead hole and secure the bracket in place.
4. If angle adjustment is needed, secure the power cable in the slot at the rear end of the stand, guiding the charging cable in the desired direction.
5. Choose a side-mounting height between 1.2-1.Bm above the ground. Adjust the angle so that the sensor directly faces the chest area where a person typically sits or remains stationary for extended periods. Note: The core function of the presence sensor detects breathing movements and may not be as sensitive to the back, potentially leading to false triggers or missed detections.
6. Peel off the protective film from one side of the adhesive tape and stick it to the clean back of the stand.
7. Peel off the protective film from the adhesive on the opposite side. Affix the sensor1s base securely to the desired location, applying even pressure for 60 seconds to ensure a strong bond. When selecting an appropriate position on the wall, ensure that the installation surface is smooth, clean, and dry. Avoid surfaces with paint or other coatings that might cause the unit to detach over time.

Note

1. If accuracy issues persist despite confirming no interfeence, download the Meross app and follow the guided setup process for adding. The Meross platform features an advanced “Space Learning” function, enabling optimal space customization based on real-world testing conditions.
2. Within the detection range, the sensor may mistakenly interpret swaying greenery, moving metal, fluttering curtains, clothing, running air conditioners, fans, and other interfering factors as the presence of a person. When installed in locations with vibrations or shaking, it may also lead to false detections. It is recommended to use the sensor cautiously in such areas.
3. If there is interference in the upper or lower part of the specified space, such as hanging fans or robot vacuum, it is recommended to install a pet-proof shield before activating the Biological Detection Only mode.
4. Avoid placing items such as green plants, metal, or thick glass between the human body and the sensor, as they may obstruct the radar frequency band.
5. To accurately identify targets lying down but not within the detection range, position and angle adjustments are necessary. For detecting the presence of a person in a lying position, it is recommended to install the radar on the wall at the bedside or head of the bed at a downward slant. Installation on the wall at the foot of the bed is not recommend­ed.

Space Learning
Space Learning enhances accuracy by automatically detecting environmental interferences, adjusting trigger baselines to reduce disruptions caused by reflections. Before initiating Space Learning, position the sensor to directly face the target area. Ensure there are no air conditioners, fans, people, or pets in the detection area.
After enabling Space Learning in the Meross app (or double-tapping the device1s rear button), leave the monitored area within 20 seconds. The indicator light will remain amber for 2 minutes during Space Learning and will turn off once the process is complete.
With Space Learning completed, the sensor makes more precise detections. providing a user experience that better fits the current environment.

Detection Range and Identification Mode Instructions
Biological Detection Only mode (default on, default distance 6m): The motion sensor and millimeter-wave sensor work together to determine that only when there is biological movement, the execution of the human scene will be triggered. This significantly reduces false alarms caused by plant swaying or robot vacuum.

Security mode (needs to be manually enabled in the app settings, default distance 12m):
Either the motion sensor or the millimeter-wave sensor triggering will report human presence. It can be triggered by any situation in the space, but the likelihood of false alarms will significantly increase.

Pet-proof Settings

The pet-proof shield can effectively adjust the detection range of the motion sensor. For example, after installing the pet-proof shield on the left side as shown below (it is recommended to install it at a height of 1.2m) and enabling Biological Detection Only mode. This will allow detection of movements only above the height of the sensor1s range, significantly reducing false triggers caused by pet movements and robotic vacuum cleaners below this height.
The pet-proof shield will block half of the motion sensor’s recognition range. You can adjust it up and down based on the actual situation, and movements of living beings within the obstructed area will not be detected.
After peeling off the double-sided adhesive from the pet-proof shield, stick it onto the lens as needed.

Scene Function Description and Recommended Linked Scenes

1. Area Occupied
   After detecting the presence of a person within the region, detection within the space continues. Activities such as reading a book or using a cell phone in the study within the Presence Sensor’s range are more accurately detected.

2. Area Occupied with Continuous Presence
   The duration can be configured by the user. It is used for handling events of prolonged presence or warnings for staying in the range for an extended period, such as reminders for prolonged sitting in a seating area, activating the exhaust fan in the restroom after a specified time, or issuing alerts for extended stays in potentially dangerous areas. If the Presence Sensors in unoccupied space does not determine unoccupied, it is recommended that the space be checked for continuously operating sources of interference.

3. Area Unoccupied
   When no person is detected in the region for a continuous period, it is determined that the current area is unoccupied. This can trigger scenes like turning off lights or fans.

4. Area Unoccupied with Continuous Absence
   The duration is user-configurable. It is used for configuring automation after people leave the space, allowing users to set Scene, such as automatically turning off air conditioning in an office area after a certain time of absence to save energy.

5. Sensitivity Recommendations
   If there are no interferences in the detection area. such as fans or pets, consider enabling “Security” mode to exclusively use radar for detecting presence and absence, which reduces detection delay and increases sensitivity.
   The detection range can be adjusted between land 12 meters in Device Settings> Detection range calibration, allowing you to customize it according to your specific needs. Note that movements outside your set detection range will not be detected.

Buttons, Indicator Lights, Functional Instructions

Product Specifications

• Model: MS600
• Input: 5V – lA, Type-C
• Radar Frequency: 24GHz(ISM)
• Light Sensor Range: 0-B000lux
• Detection Range: Presence S6m, Motion Sl2m
• Temperature Operating Range: 14″F(-l0″C)~ll3″F(45’C)
• Humidity Operating Range: 20-95% RH non-condensing

Dimensions ( W x D x H): 75.4 x 34.7 x 38.4mm or 2.97 x 1.37 x 1.51 in. System Requirement: Smartphone running iOS 16.1 or later or Android 8.1 or later, Supporting Bluetooth 4.2 or later. Existing 2.4GHz Wi-Fi network.

FAQ

• The Presence Sensor Recognition Error:
  Everyone has left the detection range, but the sensor still indicates the presence of someone.
  To ensure accurate detection of an unoccupied state, a 15-second detection delay is necessary after no presence is detected. Movement, vibrations, or metal reflections in the room may affect the radar1s
  precision. Place appliances like fans and air purifiers away from the detection area.

• Which apps can control this Matter Smart Presence Sensor?
  Any app or platform that supports the Matter protocol can control the device. The matter is created to enable interoperability among platforms. However, we recommend that you also control and manage
  with the Meross opp for better guidance and richer functionality.

• The Presence Sensor Recognition Failure:
  There are people present within the detection range, but the sensor shows absence.
  Please ensure that the sensor is positioned directly facing the human body. If the human body is out of the radar’s effective field of view or if there is a thick covering (such as thick clothes or a thick blanket) or if the human body is facing backward the sensor, the radar may not be able to effectively detect the person1s breathing status. Please try increasing the Absence Confirmation Time or adjusting the placement of the sensor. For testing purposes, please follow the procedure in the “Space Learning” section of the device’s settings page in the Meross app to adjust it for optimal results.

• Can the Presence Sensor recognize multiple individuals?
  The Presence Sensor cannot identify multiple individuals moving and existing simultaneously. It can only recognize the state of the
  fastest-moving object currently present in the space.

• Which applications can manage the Meross presence sensor?
  Any application or platform that supports the Matter protocol can manage this device. Matter was created to achieve interoperability among platforms. We also recommend that you manage the sensor with the Meross opp to get better guidance and richer functionality.

• What should I do when the LED turns solid red?
  You can troubleshoot the following:

  • Check if your home Wi-Fi is working properly.
  • Make sure that you have disabled access control in your router and that the smart plug is not blocked by the router1s firmware.
  • Factory reset your Meross smart Presence Sensor and try to add it again. Learn more at https://www.meross.com/support/faqs

The sensor-controlled light or other devices are triggered with a delay.
Please check if the current network is fluctuating or try adjusting the installation position of the device.

Warranty

For detailed warranty information, please visit https://www.meross.com/support/warranty.

Declaration of Conformity

Meross declares that this product bearing the CE marking complies with the following EU directives 2014/53/EU. 2014/30/EU. 2011/65/EU & (EU) 2015/863. Compliance with these Directives implies conformity to harmonized European standards that are noted in the EU Declaration of Conformity, which may be found at: https://www.meross.com/sup­port/eudoc.
Meross hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at
https://www.meross.com/support/ukca.

Disclaimer

1. The function of this smart device is tested under typical circumstances described in our specifications. Meross does NOT guarantee that the smart device shall perform the same as described under all circumstances.
2. By using third-party services including but not limited to Amazon Alexa, Google Assistant, Apple HomeKit, and SmartThings, customers acknowledge that Meross shall not be held liable in any way for the data and private information collected by such parties. Meross’s total liability is limited to what is expressly covered in its Privacy Policy.
3. Damages arising from ignorance of the SAFETY INFORMATION shall not be covered by Meross aftersales service, nor does Meross take any legal responsibility therefrom. Customers acknowledge their understanding of these articles clearly by reading this manual.

Compliance Information

FCC and ISED Canada Statement
This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device , pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions , may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer-ence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouragea to try to correct the interference py one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.
NMB-003 du Canada.

FCC and IC Radiation Exposure Statement
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
la distance entre !’utilisation et l’appareil ne doit pas etre inf9rieure Cl 20 cm.

Indoor use only
Utilisation en int9rieur uniquement

The bracket’s cable groove helps streamline power cord organization.

CET PRODUCT SERVICE SP. Z O..(for authorities only) Ul. Dluga 33 102, 95-100 Zgierz Polen Email: info@cetproduct.com
CET PRODUCT SERVICE LTD. (for authorities only) Beacon House Stokenchurch Business Park, Ibstone Rd. Stokenchurch High Wycombe HP14 3FE UK

Any product compliance questions, please contact: security@meross.com

Quick Installation Guide
It is recommended to use the Meross app to complete the setup process. Meross’s unique “Space Learning” and “Detection Range Calibration” enable the sensor to make more precise detections, providing a user experience that better fits the current environment.

SIMPLE DEVICE
SIMPLIFY YOUR LIFE
Email: support@meross.com
Website: www.meross.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>