MoesGo B0BJ2CDQVG Smart Bluetooth Fingerbot User Manual
- June 14, 2024
- MoesGo
Table of Contents
User Manual
Smart Bluetooth Fingerbot
BS-FB-V3
B0BJ2CDQVG Smart Bluetooth Fingerbot
https://drive.google.com/drive/folders/1cxxjEH9lbHYmkUkF_RfD7a9UUQYD845n?usp=sharing
https://pan.baidu.com/s/1pEcuUKM2jAssCcLtZngL4w?pwd=gwvf
Product Specifications
Dimensions: 32 x 32 x 32 mm / 1.3 x 1.3 x 1.3 inch
Product Weight: 32g / 1.1 oz
Communication Protocol: BLE 4.2
Functionalities: App Control, Voice Control, Cloud Control,
Scheduler
Charging Port: USB Type-C
Stall Torque: 1.6 kgf·cm
Working Temperature: -10 ~ 55
℃ / 14 ℉ ~ 131 ℉
Battery Capacity: 500 mAh
Overview
Fingerbot is the world’s smallest robot for smartly controlling different types
of buttons and switches. It can control your existing home appliances with
robotic clicks.
Switch lights via App, schedule a morning coffee, activate your vacuum cleaner
with voice command, and remotely power on your office PC. Now all these become
effortless with Fingerbot.
Device Installation
- Clean the surface of button or switch panel where you want to install Fingerbot.
- Attach Fingerbot to the panel using a double-sided tape provided in the Fingerbot package.
- Connect your Fingerbot with the App and calibrate the movement of Fingerbot’s robotic arm to fit your switches and buttons.
After installation, we recommend resting Fingerbot for 24 hours to reach maximum adhesion.
Preparation for use
① Download MOES App on App store or scan the QR code.
Moes application is much more compatible than Tuya smart / smart life
application. It also provides a new customized service for controlling scenes
through Siri, widgets and scene recommendation. (Note: Tuya smart / Smart Life
app is still working, but moes app is highly recommended)
② Registration or Log in.
- Download “MOES” Application.
- Enter the Register/Login interface; tap “Register” to create an account by entering your phone number to get verification code and “Set password”. Choose “Log in” if you already have a MOES account.
Steps for connecting the APP to the device
- First, make sure your phone’s Bluetooth is turned on. If not, turn on Bluetooth.
- Confirm the blue light is flashing, if not, Press and hold the reset /function button until the prompt tone is heard and the button is released, and the blue light slow flashing device enters the distribution network state.
- Open MOES App and Click“+” Choice“Add Device”, then the prompt page will automatically show on the screen. Click “Add”.
- Add the device successfully, you can edit the name of the device to enter the device page by click “Done”.
- Click“Done”to enter the device page to enjoy your smart life with home automation.
Device Control
App Control
You can control Fingerbot directly via Bluetooth with the App.
Scheduler
You can set schedulers in the App to automatically activate Fingerbot at
certain times.
Remote control
With a Fingerbot Bridge (needs to be purchased separately), you can control
your Fingerbot through the Internet from anywhere.
Voice Control
With a Fingerbot Bridge, you can connect Fingerbot with voice assistants such
as Google Home Assistant and Amazon Alexa. You can set up voice commands in
the App to active voice-control function.
Device Reset
To reset your Fingerbot:
- Turn Fingerbot off for 2 seconds, turn it on for another 2 seconds. Repeat such action 3 times consecutively, that is “on-off-on-off-on-off-on”.
- Fingerbot will be reset automatically when the indicator light turns to purple.
Robotic Arm Extension
With the modular design, the arm of Fingerbot is replaceable in order to meet
different needs in diverse situations.
Straight Arm
You can install the arm by following the picture below. We provide three
straight arms with different lengths to assist Fingerbot better fitting various
button-control cases.
Rocker Arm
Fingerbot makes use of the rocker arm to push and pull the switch button to
change the switch status of equipment.
Please follow the instructions below to install the rocker arm.
- After connecting Fingerbot with the App, set Fingerbot to the ‘Switch’ mode.
- Move the arm of Fingerbot to the bottom and fix the Fingerbot on the switch panel.
- Tear off the tape covering on the rocker arm to stick the arm to the switch button.
- After ensuring the firmness, use the App to adjust the rising range of Fingerbot’s arm, so that its movement range can be adapted to the switch button.
- If the app is showing the opposite status to the actual status, please use the ‘invert’ function to invert the display mode.
Ring Arm
Fingerbot makes use of the ring arm to push and pull the toggle switch to change the switch status of equipment. Please follow the instructions below to install the ring arm.
- After connecting Fingerbot with the App, set Fingerbot to the ‘Switch’ mode.
- Following the picture, fix two cushion blocks to Fingerbot with tape.
- Put the ring of the arm on the toggle button, and tear off the tape covering on the other side of the cushion block to fix the Fingerbot on the switch panel.
- After ensuring the firmness, use the App to adjust the movement range of Fingerbot’s arm, so that its movement range can be adapted to the toggle.
Warnings
The product is non-waterproof. Do not install it on an underwater appliance.
The product contains a lithium battery, therefore prohibited in the humid,
high-temperature environment.
Do not hinder the movement of the Fingerbot’s arm when it is working.
Otherwise it may cause the arm to fall off and damage to the motor inside
Fingerbot.
SERVICE
Thank you for your trust and support to our products, we will provide you with
a two-year worry-free after-sales service (freight is not included), please do
not alter this warranty service card, to safeguard your legitimate rights and
interests. If you need service or have any questions, please consult the
distributor or contact us.
Product quality problems occur within 24 months from the date of receipt,
please prepare the product and the packaging, applying for after-sales
maintenance in the site or store where you purchase; If the product is damaged
due to personalreasons, a certain amount of maintenance fee shall be charged
for repair.
We have the right to refuse to provide warranty service if:
- Products with damaged appearance, missing LOGO or beyond the service term
- Products that are disassembled, injured, privately repaired, modified or have missing parts
- The circuit is burned or the data cable or power interface is damaged
- Products damaged by foreign matter intrusion (including but not limited to various forms of fluid, sand, dust, soot, etc.)
RECYCLING INFORMATION
**** All products marked with the symbol for separate collection of waste
electrical and electronic equip ment (WEEE Directive 2012/19 / EU) must be
disposed of separately from unsorted municipal waste. To protect your health
and the environment, this equipment must be disposed of at designated
collection points for electrical and electronic equipment designated by the
government or local authorities. Correct disposal and recycling will help
prevent potential negative consequences for the environment and human health.
To find out where these collection points are and how they work, contact the
installer or your local authority.
WARRANTY CARD
Product Information
Product Name_
Product Type__
Purchase date_
Warranty Period__
Dealer Information
Customer’s Name__
Customer Phone__
Customer Address
Maintenance Records
Failure date | Cause Of Issue | Fault Content | Principal |
---|---|---|---|
Thank you for your support and purchase at we Moes, we are always here for your complete satisfaction, just feel free to share your great shopping experience with us.
If you have any other need, please do not hesitate to contact us first, we will try to meet your demand.
FOLLOW US
MOES.Official
@moes_smart
@moessmart
@moes_smart
** @moes_smart
www.moes.net
EVATOST CONSULTING LTD
Address: Suite 11, First Floor, Moy Road
Business Centre, Taffs Well, Cardiff, Wales,
CF15 7QR
Tel: +44-292-1680945
Email: contact@evatmaster.com
AMZLAB GmbH
Laubenhof 23, 45326 Essen
Made In China
Maker:
WENZHOU NOVA NEW ENERGY CO.,LTD
Address: Power Science and Technology Innovation
Center, NO.238, Wei 11 Road, Yueqing Economic
Development Zone, Yueqing, Zhejiang, China
Tel: +86-577-57186815
After Service Email: service@moeshouse.com**
AH02
Documents / Resources
|
MoesGo B0BJ2CDQVG Smart Bluetooth
Fingerbot
[pdf] User Manual
B0BJ2CDQVG, B0B2LKHGVC, B08MWK8LN4, B0B97G3B8G, B09V23YWMY, B0BJ2CDQVG Smart
Bluetooth Fingerbot, B0BJ2CDQVG, Smart Bluetooth Fingerbot, Bluetooth
Fingerbot, Fingerbot
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>