VOSSLOH SCHWABE 187341 Blu 2 Light Connect Dmx Owner’s Manual
- September 29, 2024
- Vossloh Schwabe
Table of Contents
VOSSLOH SCHWABE 187341 Blu 2 Light Connect Dmx
Specifications
- Product Name: Blu2Light Connect DMX
- Ref. No.: 187341, 187342
- Communication: Bluetooth
- Output Power: 5V DC
- Input Voltage Range: Varies depending on the LED module
- Operating Lifetime: 50,000 hours
- Product Guarantee: 5 years
- Ambient Temperature Range: Not specified
- Ambient Humidity: Not specified
- IP Protection: Not specified
- Protection Class: Not specified
- Dimensions (LxWxH): Not specified
- Weight: Not specified
Technical data
- DMX controller with Bluetooth® wireless technology for controlling architectural lighting
- For luminaire installation and independent mounting with cord grip
- Mounting: M3 screws
Dimensions
Connection example
Product Guarantee
- 5 years
- The conditions for the Product Guarantee of the Vossloh-Schwabe Group shall apply as published on our homepage.
(www.vossloh-schwabe.com). We will be happy to send you these conditions upon request.
Possible Configurations
General Safety Instructions
- Only qualified persons are allowed to install and start-up Blu2Light products.
- Prior to installing and commissioning the system, read these instructions carefully. Only this will guarantee correct and safe handling. Please keep these instructions as you may need them later.
- The devices must always be disconnected before any work is carried out on them.
- The applicable safety and accident prevention regulations must be observed.
- Opening by unqualified personnel of the products is prohibited: Risk of death from electric shock! The devices must only be repaired by the manufacturer.
- Supply of external voltage to the input side, e.g. 230 V mains voltage, may destroy the products.
Mounting
Secure the Blu2Light Connect DMX with two screws. Connect a power supply
between 5 VDC +/- 5 % on the input side. The maximum permissible cable length
between the power supply and Blu2Light Connect DMX is 1.5 meters. The
controllable DMX device is connected to the output side. When connecting the
power supply and the DMX device, ensure that the polarity is correct,
otherwise the device and/or the controllable DMX device may be destroyed! For
independent installation, the cord grip caps must also be fitted.
Power supply
This product does not contain its power supply and must be supplied with 5 VDC
+/- 5 % constant voltage. Operation with DC voltage outside the specified
tolerances and with AC voltage is generally not permitted and will destroy the
products! Please refer to our system overview for suitable VS power supplies
and corresponding drivers.
Installation instructions
- Conductor cross-section input side: 0.5–1.5 mm² for rigid or flexible conductors
- Conductor cross-section output side: 0.5–1.5 mm² for rigid or flexible conductors
Setup and operation
The Blu2Light luminaire installation devices are configured with the LINA
Connect App and can be operated via the LINA Touch App. For the exact
procedure for configuring the devices, please refer to the instructions in the
Blu2Light App or the corresponding documentation. An Apple iPad is required
for setup, and both tablets and smartphones can be used for operation. Both
are not included in the delivery. For information on the iOS and Android
operating systems that can currently be used, refer to the LiNA Connect/ LiNA
Touch manual:
Bluetooth® wireless technology
The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by Vossloh-Schwabe is under
license. Other trademarks and trade names are those of their respective
owners.
Important note:
Please refer to the installation instructions included with the product and
the applicable Blu2Light system data sheet before installation. Make sure that
the Bluetooth radio signal can propagate freely according to the
specifications. We, Vossloh-Schwabe Deutschland GmbH, herewith confirm that
these devices comply with the basic requirements of the directive 2014/53 / EU
and other relevant directives. The entire text of the Declaration of
Conformity can be obtained from the following address:
-
Vossloh-Schwabe Deutschland
GmbH Stuttgarter Straße 61/1
D-73614 Schorndorf
www.vossloh-schwabe.com -
Stuttgarter Straße 61/1 ·
73614 Schorndorf ·Germany
Phone +49 7181/8002-0
Fax +49 7181/8002-122
www.vossloh-schwabe.com
FAQs
Q: Can I use USB-C for power supply?
A: No, USB-C is not supported for power supply. Please use USB Power Supply or
USB Powerbank with 5VDC output.
Q: How many DMX channels can be controlled in ControllerMode?
A: In Controller Mode, a maximum of 32 DMX channels can be controlled.
Q: What is the warranty period for the product?
A: The product guarantee is 5 years from the date of purchase.