soundcore Life Q20 Hybrid Active Noise Cancelling Headphones User Manual

June 13, 2024
Soundcore

Soundcore Life Q20soundcore Life Q20 Hybrid Active Noise Cancelling
Headphones User Manual

Life Q20 Hybrid Active Noise Cancelling Headphones

soundcore Life Q20 Hybrid Active Noise Cancelling Headphones - Figure
1soundcore Life Q20 Hybrid
Active Noise Cancelling Headphones - Figure 2

Powering On/Off

Power  On| Press and hold for more than 3 seconds| Flashing blue (Status indicator)
---|---|---
Power Off| Press and hold for 3 seconds| Steady red for 1 second (Status indicator)
ANC On| Press and hold for more than 1 second| Steady green (NC LED indicator)
ANC Off| Press and hold for more than 1 second| NC LED indicator off

Pairing

soundcore Life Q20 Hybrid Active Noise Cancelling Headphones -
Pairing

Enter Bluetooth pairing mode when Life Q20 is off| Press and hold for 5 seconds
---|---
Rapidly flashing blue| Pairing mode
Steady blue| Connected to a device(but is not playing music)
OFF(Status indicator)| Connected to a device(playing music)
Rapidly flashing blue| Connected to a device(Incoming call)

Controls

Bluetooth mode

Press| Play/pause
Note: the status indicator will light up in blue for 2 seconds, then turn off.
---|---
Press and hold for 1 second| Next track
Press and hold for 1 second| Previous track
Press| Volume up / down
Default mode| Normal Equalizer
Press multi-function key twice
Note: Press twice again to switch back to
Normal Equalizer.| BassUP™(Dual Equalizer)
Press and hold for 1 second| ANC mode (Active noise canceling mode) activation
ANC mode (Active noise canceling mode) deactivation

Active Noise Cancelling mode (ANC) blocks the noise from surrounding environment while wearing Soundcore Life Q20.

Mobile phone

Press Answer / End call

Put current call on hold and answer incoming call
Press and hold for 1 second| Reject call
Switch between held call and active call
Slow flashing blue (Status indicator)| On a call
Slow flashing blue (Status indicator)| Incoming call

Press and hold for 1 second Activate Siri / other voice control software

Aux-in

soundcore Life Q20 Hybrid Active Noise Cancelling Headphones - Aux-
in

Plugging in an audio cable will automatically switch to AUX mode, and Bluetooth mode and ANC will turn off.

Charging Your Headphones

soundcore Life Q20 Hybrid Active Noise Cancelling Headphones -
Charging

| Notification sound (Tone) :There are only 2 hours of playtime  left. You will hear a voice prompt every 30 minutes.| Low battery
---|---|---
| Flashing red once every 60 seconds (Bluetooth LED indicator)
| Steady red (Status indicator)| Charging
Note: Do not switch on Life Q20 while charging.
| Off (Status indicator)| Fully charged

Specifications

Specifications are subject to change without notice.

Input 5 V  0.65 A
Charging time 3 hours
Playtime (Bluetooth with ANC mode on) 40 hours
Playtime (Bluetooth with ANC mode off) 60 hours
Weight 268 g / 9.5 oz
Impedance 16 Ω
Driver (full range) 40 mm x 2
Frequency response 16 Hz – 40 KHz
Bluetooth version V 5.0
Range 15 m / 49.21 ft

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals