Prana Air SQUAIR Air Monitor Instruction Manual
- June 12, 2024
- Prana Air
Table of Contents
SQUAIR MONITOR
INSTRUCTION MANUAL
know what you
breathe
CONTACT
| Address | Phone | Online |
|---|---|---|
| 706, 7th floor, Crown heights, Rohini Sec-10, New delhi-110085, India | ||
| 73918-73918 | Email: [email protected] |
Website: www.pranaair.com
GETTING STARTED
KNOW YOUR SQUAIR
For your reference:
1. LED light
2. Button
3. USB inlet
4. SD Card inlet
5. RS485 inlet| 6. SIM Card inlet
7. Control buttons
8. Power socket
9. Device id QR Code
---|---
HOW TO CONNECT
-
On the back side of your SQUAIR make sure switch Number 2 is ON and rest all switches are down.
-
Put your SQUAIR in AP mode, long press Prana air logo until you see “AP” on the LED Screen.
-
Search for “Air monitor_(your device id)” network in your phone’s Wi-Fi settings and connect to it with password “12345678″
-
Open your browser and type “192.168.4.1″ in the address bar. SSID: Select the wifi you want your SQUAIR to connect.
-
Open AQI App on your phone and create an account or simply log in if you already have one. Go to my devices and select SQUAIR from the given options
-
Enter the Device ID printed on the back side of SQUAIR or scan the QR code printed there.
Configure the device name of your choice. -
Your device is now connected successfully, the data will be shown in the AQI dashboard.
-
Place the SQUAIR Monitor anywhere inside your home, office, restaurant, clinic etc.
Visit us:
www.pranaair.com