Earykong TYSM_01 Tuya WiFi Smoke Alarm Fire Protection Smoke Detector-User Guide
- June 4, 2024
- Earykong
Table of Contents
Earykong TYSM_01 Tuya WiFi Smoke Alarm Fire Protection Smoke Detector
Specifications
-
Smart home platform
Tuya -
Type
Smoke Detector -
Frequency
-
2.4G Wifi
-
Battery
1.5V AAA battery (2 pieces) not include -
APP
IOS / Android -
Download APP
Tuyasmart / Smart life -
Origin
Mainland China -
Brand
Earykong
Introduction
This product is a smart photoelectric smoke sensor, with an ultra-low-power MCU design. It is an early warning device, that can’t detect gas, heat, or fire, nor stop a fire or put out the fire. It is capable of real-time detecting the presence of smoke. Once detect the danger of fire smoke, a red LED will be ON, and alarms to alert you and your family timely. It can be widely used in households, lounges, coffee houses, dancing halls, and any other places that need fire alarm monitoring.
Flat Ceiling Mounting
The preferred location to install the smoke sensor is in the center of the ceiling because smoke, heat, and combustible products rise to ceil and will laterally spread. Keep at least 30cm distance from lights or decorations, and at least 15cm away from walls and corners.
Sloping Ceiling Mounting
If the Ceiling is sloping, please install the smoke sensor at a horizontal distance of 90cm away from the ceiling top.
How to use
- Clockwise rotation of the mounting bracket, take out and prepare to install the battery.
- Input 2pcs AAA battery inside, the LED indicator ON and then OFF.
- Download the “TuyaSmart” App, or Scan below QR code to download.
- Register a Tuya Smart App account with your mobile phone, and log in. Click “+” at “My Home” or the Mid-blank space to add a device, choose Security Sensor, find Sensor (WiFi), and click.
- Press the RESET for more than 5 Seconds with the PIN, and the LED indicator flashes quickly, and start network configuration automatically. Input the WiFi code to start connecting.
- Press RESET for 5 seconds with PIN when configuration network, indicator flashes slowly, start manual network configuration mode. Input WiFi account and code to add device.
- Configuration network successfully, click smoke detector, long press TEST, the buzzer will have DI DI sound, App receives the notification “ Detecting smoke”; Release TEST, App will show “No Smoke Detected”.
Mute function
Please make sure there is no real danger of fire when using the mute function. Under known and non-fire alarm conditions, please do not block or by any other form to prohibit alarming. Press the Test/Mute button to lower sensitivity and relieve the alarm. Test To burn cotton produces smoke and face the smoke detector. When the smoke detector has DiDi alarm, press TEST/MUTE to stop alarming. Please do not use a flame to do the test.
Frequently Asked Questions
What’s the process for Wi-Fi smoke detectors?
The smart smoke detectors link to your smart home hub (if you have one) and an app on your smartphone when an alert is activated via Wi-Fi or a similar communication system. You can use the phone app to turn off the alarm if you accidentally burn a batch of peanut butter cookies and cause a false alarm.
What do the smoke alarm buttons do?
The reset button is the only button on the smoke detector. To turn off the smoke detector, press and hold the reset button for three seconds. Because the smoke detectors are up in the ceiling, using a chair or broom to reach the reset button might be useful.
How does my smoke detector function?
Using a variety of technologies, smoke alarms can sense minute airborne particles to identify fires. They signal the alarm to ring when they find those particles above a certain level so that you and your family can flee to safety and dial 911. Lives are saved by smoke alarms.
A smart fire alarm system is what?
Intelligent control systems, also known as addressable fire alarms, are more advanced than traditional fire alarm systems and are able to pinpoint the specific site of the incident. These systems might be very simple, containing just one device, or quite complex, containing hundreds of devices.
What should I do if my smoke detector still beeps after changing the battery?
For 15–30 seconds, press and hold the test button. This will discharge any remaining charge in the smoke alarm and completely reset it. Close the battery compartment after installing the new battery. Use a microfiber cloth or a can of compressed air to clean the appliance.
Will Alexa pick up a smoke alarm?
Alexa uses the in-built microphone to identify the noises of a smoke alarm, CO alarm, or glass breaking when Alexa Guard is set to “Away.” Alexa will notify your phone with a Smart Alert when certain sounds are heard.
Will your phone recognize smoke?
A smartphone camera can use the “Smoke Detective” app to detect smoke from a fire, and if it does, an audio and visible alarm will go out. After his family through the agony of a house fire, local husband and father Steve Davis had the notion.
How much time does a fire alarm sound?
The alarm will instantly go off if the smoke is not too dense. The alarm will take precedence over the Hush if smoke or other debris is interfering with the sensor. Unless there are still combustion particles present, the smoke alarm will automatically reset after around 8 minutes.
Can smoke detectors be controlled remotely?
Yes, you can remotely monitor your already-installed smoke detectors. Your panel must be actively connected to Total Connect or Alarm.com in order to accomplish this.
Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>