Tapo P100M Mini Smart Wi-Fi Plug User Guide
- June 12, 2024
- tapo
Table of Contents
Tapo P100M Mini Smart Wi-Fi Plug User Guide
Tapo App
Getting Started
- Get the Tapo app from the App Store or Google Play.
- Follow the instructions in the Tapo app to complete the setup.
Supported Load Type for UK Version:
- 220-240Vac, 50/60Hz, 13A Resistive Load
- 220-240Vac, 50/60Hz, 2.0FLA/13LRA*, Motor Load
- FLA=Full Load Ampere; LRA=Lock Rotor Ampere
Setting Up with Matter
This is a Matter-certified device. You can integrate it into any Matter ecosystem you prefer for easy control.
How to Set Up
A Matter-supported controller and smart home app of the same ecosystem are required.
- Turn on Bluetooth on your phone
- Open your selected smart home app and scan the provided Matter QR code on the plug.
- Follow the instructions in the app to complete setup.
Note : Setup processes may vary between ecosystems.
Failed to Set Up?
- Try to connect your phone to a stable 2.4 GHz Wi-Fi network with internet access instead of a 5 GHz network.
- Unplug your device and plug it back to restart.
- Refer to the FAQ for detailed instructions: https://www.tp-link.com/support/faq/3520/
Support
For technical support, the user guide, FAQs, warranty, and other information,
please visit
https://www.tapo.com/support/.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU) 2015/863. The original EU Declaration of Conformity may be found at https://www.tapo.com/en/support/ce/.
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017.
The original UK Declaration of Conformity may be found at https://www.tapo.com/support/ukca/.
Safety Information
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device.
- Do not use the device where wireless devices are not allowed.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- The devices are not intended for use in locations where the temperature may be less than actual room conditions, such as unheated warehouses or garages.
- For passthrough devices, plug the power strips into the integrated electrical sockets of the devices, but devices of the same or another type not be stacked in normal use.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
No restrictions exist in the use of radio frequencies or frequency bands in all EU member states, EFTA countries, Northern Ireland and Great Britain
Operating Frequenc
Warranty
For more information about warranty, please visit https://www.tapo.com/en/support/
References
- Anatel — Agência Nacional de Telecomunicações
- Regulatory Compliance | Tapo
- Support | Tapo
- Regulatory Compliance | Tapo
- UKCA | Tapo
- TP-Link Product Support - Wireless Networking Equipment Support
- General Questions about Matter-Enabled Devices | TP-Link