logitech 950 Wireless Headset User Guide

September 27, 2024
Logitech

950 Wireless Headset

Product Specifications

  • Adjustable noise-cancelling microphone boom
  • Microphone mute function
  • Call button for call controls
  • Active noise cancellation (ANC) & Transparency mode
  • Adjustable headband with padded replaceable earpads
  • Touch controls for volume and music playback
  • Comes with USB-A adapter and USB-C receiver

Product Usage Instructions

What’s in the Box

The package includes:

  1. Headset
  2. USB-C receiver
  3. USB-A adapter
  4. USB-C to C charging cable
  5. Travel bag
  6. User documentation

Power On / Off

To power on the headset:

  1. Slide the power switch to the center position.
  2. The light indicator will turn white once powered on.

To power off, slide the power switch to the power icon position.

Pairing via USB Receiver

To pair the headset with the USB receiver:

  1. Insert the USB-C receiver into the computer’s USB-C port or use
    the USB-A adapter for USB-A ports.

  2. Power on the headset and wait for pairing confirmation
    indicated by solid white lights on both receiver and headset.

  3. Select ‘Zone 950’ in the computer sound settings for audio
    output.

Adjusting Headset and Microphone Boom

To adjust the headset:

  1. Slide the earcups up and down the headband to fit
    comfortably.

  2. Swivel the earcups to align with your ears.

The microphone boom can be rotated 270 degrees for wearing on
either side, and audio channels will adjust accordingly.

Charging

The headset automatically powers off when idle to save battery.
Charging is done via USB-C cable connected to a computer. The
indicator light will show a breathing white light during
charging.

Headset Controls

The headset controls include various actions for call handling,
ANC settings, media playback, volume adjustment, and voice
assistance triggered by different button presses and taps.

Frequently Asked Questions (FAQ)

Q: How can I change the sleep timer settings?

A: The sleep timer can be adjusted using the Logi Tune app,
allowing you to personalize the idle time before the headset powers
off.

Q: Can I use the headset while charging?

A: Yes, you can use the headset with the USB-C cable connected
for charging while still having it paired via Bluetooth or USB
receiver.

ZONE 950
Setup Guide Guide d’installation

CONTENTS

English

3

25

14

Indonesia

36

KNOW YOUR PRODUCT
Adjustable noise-cancelling microphone boom
Microphone mute
Call button
Active noise cancellation (ANC) & Transparency mode

Adjustable headband Padded replaceable earpads Touch controls for volume and music
USB-A adapter USB-C receiver Light indicator
Light indicator USB-C port for charging cable Power / Bluetooth® pairing
3English

WHAT’S IN THE BOX 1 Headset 2 USB-C receiver 3 USB-A adapter 4 USB-C to C charging cable 5 Travel bag 6 User documentation
POWER ON / OFF 1 Slide power switch to the center 2 Once powered on, light indicator
turns white 3 To power off, slide power switch
to the power icon

USB-C USB-A USB-C

PAIRING VIA USB RECEIVER
1 USB-C Insert the receiver into the computer USB-C port
USB-A Insert the USB-C receiver into the USB-A adapter Then insert the adapter into the computer USB-A port
2 Headset is already paired to the receiver it ships with Just power on the headset Once successfully paired, the light indicator on the receiver will remain solid white Light indicator on the headset will turn solid white
3 Make sure “Zone 950” is selected on the computer sound setting

USB-C USB-A

4English

PAIRING VIA BLUETOOTH® 1 Slide power switch to the Bluetooth
icon and hold for 2 seconds Light indicator will flash blue rapidly 2 Open Bluetooth settings on your device 3 Select “Zone 950” in discoverable devices 4 Once successfully paired, light indicator will turn solid white
Tip: When the headset is paired to the laptop, if needed, go to the sound setting and select “Zone 950 Stereo” for the best music quality and select “Zone 950 Hands-Free” for calls
ADJUSTING HEADSET 1 Adjust headset by sliding earcups
up and down the headband 2 Swivel earcups to fit on your ear 3 It may be easier to adjust
the headset on your head Move the earcups up and down the headband until they sit comfortably on your ears
ADJUSTING THE MICROPHONE BOOM Microphone boom rotates 270 degrees Wear it on either left or right side Audio channel will switch automatically, depending on the direction you are wearing the microphone

ZONE 950 2 sec.

5English

CHARGING
Headset automatically powers off when left idle. Sleep timer can be changed in Logi Tune app. Headset indicator light will turn RED when battery is low.
Charging via USB cable
1 Plug the USB-C cable end into the USB-C port on the bottom of the earcup
2 Plug the USB-C end into the USB-C charging port on your computer
3 Indicator light will be a breathing white light for charging
Indicator light will be solid white when fully charged ­ 2 hours of charging fully charges the battery ­ 5 minutes will give you 1 hour of talk time
4 Headset can be used with receiver and Bluetooth paired while charging It can also be used as a corded headset with the USB-C cable connected while the headset is powered off

USB-C USB-C

6English

HEADSET CONTROLS
Button

Usage Call controls

Answer / End call Reject call

Action Short press 2 seconds press

Resume call

Short press

ANC controls

Toggle between ANC and Transparency
ANC and Transparency off

Short press 2 seconds press

Media controls Volume controls Headset status
Mute Voice assistance

Play / Pause Track forward
Volume up Volume down Check connectivity and battery status
Mute on Mute off

Double tap Triple tap Swipe up Swipe down Tap and hold for 2 seconds
Short press Short press

Trigger voice assistant

2 seconds press (when mic boom is down)

Note: – Media control functionality depends on the type of application – Call activities are always the first priority over media streaming When two devices are connected, the Bluetooth
connection will be prioritized over the receiver When two Bluetooth devices are connected, the last active device will take a priority over the other And the priority between two Bluetooth devices can be customized on Logi Tune app under Connected devices
Tip: ANC and touch controls can be customized on Logi Tune app

7English

MUTE There are 3 ways to mute your microphone

Mute

1 Press the button to mute

2 Flip up or down the mic boom to mute or unmute *

  • Can be disabled on Logi Tune app

“Mute on” “Mute off”

3 Simply take the headset off to mute and put it back to unmute To use this feature, enable it on Logi Tune app

Voice prompts indicate when the mic is mute on/off
ACTIVE NOISE CANCELLATION (ANC) ANC blocks out the noise around you to help you concentrate on the task at hand — Press the ANC button on the side of
the earcup to toggle between ANC and Transparency mode — There will be voice prompts when switching between modes
Note: ANC button can be customized to cycle through up to 4 different modes on Logi Tune app

“ANC High” “Transparency On”

8English

HEADSET LIGHT INDICATOR
Light

White
Red Blue Blue and White

Solid
Pulsing Blinking Blinking
Solid Flashing Blinking

Status Power on Connected to a device Battery fully charged Battery charging Incoming call Low battery Mute on Bluetooth pairing mode Headset firmware updating

Power on / Connected to a device / Battery fully charged Battery charging Incoming call Low battery
Mute On Bluetooth pairing mode Headset firmware updating

RECEIVER INDICATOR LIGHT
Light

White
Red Blue

Solid
Repeat flashing on and off Solid
Flashing

Status Connected Ongoing call Incoming call
Mute on Pairing

Connected / Ongoing call Incoming call Mute on Pairing

9English

ON-HEAD DETECTION Sensors on the headset can detect if the headset is worn or not and control the status It can be disabled or enabled on Logi Tune app
Note: Functionality depends on the type of application
Auto pause/resume During media streaming, when the headset is taken off, the media will pause When the headset is put on, the media will resume
Answer incoming call When there is an incoming call, put on the headset to answer the call To use this feature, enable it on Logi Tune app
Mic mute/unmute During an ongoing call, when the headset is taken off, the mic will be muted When the headset is put on, the mic will be unmuted To use this feature, enable it on Logi Tune app
AUDIO OVER USB (DENSITY-FRIENDLY) If your audio is unstable during a call because there are too many wireless devices nearby (high density), the headset can be used as a corded headset 1 Turn off the headset 2 Connect the headset to the USB cable provided
And plug the other side of the USB-C cable into the USB-C port on your computer 3. Make sure “Zone 950” is selected on the audio device setting.
Note: Headset would be charged during this mode Button controls may not be available in this mode
LOGI TUNE Logi Tune helps boost your headset performance with periodic software and firmware updates Learn more and download Logi Tune at logitech com/tune, the Apple App Store or Google Play store.

USB-C USB-C
Logi Tune
logitech.com/tune
10English

ADJUSTING SIDETONE Sidetone lets you hear your own voice during conversations so you are aware of how loud you are talking In Logi Tune app, select the sidetone feature, and adjust the dial accordingly ­ A higher number means you hear more external sound ­ A lower number means you hear less external sound
AUTO SLEEP TIMER By default, your headset will automatically power off when not in use for 1 hour Adjust the sleep timer in Logi Tune app
PERSONAL EQ Create a personalized sound equalizer that is optimized for your hearing in Logi Tune Mobile app Through a simple listening test, our algorithm detects what you hear and adjusts frequencies to best deliver the sound you’ve wanted
Note: This applies to music quality instead of call audio quality
ADVANCED CALL CLARITY Reduces the ambient noise from the far end of a call to hear them more clearly Enable it in Logi Tune app and select low or high mode depending on the noise loudness ­ WIth this feature enabled, you can enjoy up to 12 hrs (ANC on)
or up to 14 hrs (ANC off) of talk time
HEARING PROTECTION Zone 950 provides three types of protection to help you hear safely
Peak limiting: Audio volume is always limited at 100dBA to prevent hearing damages
Anti-startle protection: Once enabled it in Logi Tune app, it eliminates sudden audio spikes to avoid acoustic shocks as per Australian G616 guideline This applies to call activities only
Noise exposure over time: Once enabled it in Logi Tune app, it protects your ears from the noise exposure over an 8-hour period with a limit up to 85dBA as per Australian G616 guideline This applies to call activities only

11English

UPDATE YOUR HEADSET It is recommended to update both your headset and receiver To do so, download Logi Tune from logitech com/tune
Note: Turn off and on the headset after the update is completed to make sure it is successfully done
RECONNECT YOUR HEADSET In case the headset is disconnected to the receiver, you can reconnect your headset via Logi Tune 1 Plug USB-C receiver or USB-A adapter with the USB-C receiver
into the computer USB port 2 Power on the headset by sliding the power switch to the center 3 Open Logi Tune Desktop on your computer 4 Select “Zone Receiver” from the dashboard 5 Wait while it is looking for the previously connected headset 6 If no headset is shown as connected to the receiver,
click “Pair headset” 7 Enter pairing mode on the headset by sliding the power switch
to the Bluetooth icon and holding it for 2 seconds Light indicator will flash blue rapidly 8 Once successfully paired, the light indicator on the receiver and on the headset will turn solid white RESET YOUR HEADSET To reset your headset back to its original state, power headset on, hold the power button to the pairing mode and long press the ANC button for 5 seconds The headset is successfully reset when the headset light indicator blinks fast in red and white 3 times and turns off
12English

DIMENSIONS
Headset: Height x Width x Depth: 183 9 x 179 1 x 70 0 mm Weight: 0 23 kg Receiver: Height x Width x Depth: 26 6 x 12 4 x 6 5 mm Adapter: Height x Width x Depth: 24 5 x 15 4 x 8 7 mm
SYSTEM REQUIREMENTS
Works with common calling applications across almost all platforms and operating systems Works with Windows, Mac, or Chrome-based computer via USB-C, USB-A, Bluetooth and iOS or Android Bluetooth enabled devices
TECHNICAL SPECIFICATIONS
Microcrophone type: 5 omnidirectional MEMS Frequency response (headset): 20~20 kHz (music mode), 100~8 kHz (talk mode) Frequency response (microphone): 100~8 kHz Battery type: Built-in battery (lithium ion) Battery life (talk time): Up to 15 hrs (ANC on), up to 18 hrs (ANC off) Battery life (listening time): Up to 22 hrs (ANC on), up to 40 hrs (ANC off) Bluetooth version: 5 2 Wireless range*: Up to 50 m/170 ft (open field line of sight) USB-C to C charging cable: 1 5 m Compliant to EN50332-2

  • Wireless range may vary based on environmental and computing conditions
    logitech.com/support/zone950
    © 2023 Logitech Logitech, Logi, Zone, and their logos are trademarks or registered trademarks of Logitech Europe S A and/or its affiliates in the U S and other countries Apple, the Apple logo, iOS, and Mac are trademarks of Apple Inc , registered in the U S and other countries App Store is a service mark of Apple Inc Android, Chrome, Google Play and the Google Play logo are trademarks of Google LLC The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc and any use of such marks by Logitech is under license Windows is a trademark of the Microsoft group of companies USB-C and all other 3rd party trademarks are the properties of their respective owners Logitech assumes no responsibility for any errors that may appear in this manual Information contained herein is subject to change without notice

(ANC)

USB-A USB-C
USB-C /
14

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals