Paxton Access ins-30230 Mortise Galaxy Black PaxLock Pro User Guide

June 4, 2024
Paxton Access

Paxton Logo ins-30230

Paxton Access ins 30230 Mortise Galaxy Black PaxLock
Pro

ins-30230 Mortise Galaxy Black PaxLock Pro

Paxton Access ins 30230 Mortise Galaxy Black PaxLock Pro -
FigPaxton Access ins 30230 Mortise
Galaxy Black PaxLock Pro - Fig 1Paxton Access ins 30230 Mortise Galaxy Black PaxLock Pro -
Fig2Paxton Access ins 30230 Mortise
Galaxy Black PaxLock Pro - Fig3Paxton Access ins 30230 Mortise Galaxy Black PaxLock Pro -
Fig4Paxton Access ins 30230 Mortise
Galaxy Black PaxLock Pro - Fig 5Paxton Access ins 30230 Mortise Galaxy Black PaxLock Pro - Fig
6

Net2

Paxton Access ins 30230 Mortise Galaxy Black PaxLock Pro -
Fig7Paxton Access ins 30230 Mortise
Galaxy Black PaxLock Pro - Fig 8

Paxton10

Paxton Access ins 30230 Mortise Galaxy Black PaxLock Pro -
Fig8

Paxton Access ins 30230 Mortise Galaxy Black PaxLock Pro -
Fig9Paxton Access ins 30230 Mortise
Galaxy Black PaxLock Pro - Fig10Paxton Access ins 30230 Mortise Galaxy Black PaxLock Pro -
Fig11Paxton Access ins 30230 Mortise
Galaxy Black PaxLock Pro - Fig12

Standalone

Paxton Access ins 30230 Mortise Galaxy Black PaxLock Pro -
Fig13Paxton Access ins 30230 Mortise
Galaxy Black PaxLock Pro - Fig14Paxton Access ins 30230 Mortise Galaxy Black PaxLock Pro -
Fig15

StandalonePaxton Access ins 30230 Mortise Galaxy Black PaxLock Pro -
Fig16Paxton Access ins 30230 Mortise
Galaxy Black PaxLock Pro - Fig17Paxton Access ins 30230 Mortise Galaxy Black PaxLock Pro -
Fig18Paxton Access ins 30230 Mortise
Galaxy Black PaxLock Pro - Fig19Paxton Access ins 30230 Mortise Galaxy Black PaxLock Pro -
Fig20

+44 (0)1273 811011
 support@paxton.co.uk
 Paxton. support
877.438.7298
supportUS@paxton-access.com
usapaxton.support
+32 (0) 78485147
support@paxton-benelux.com
Paxton.benelux.support

These products are not suitable for retail sale. All warranties are invalid if these products are not installed by a competent person. Parts of this product are Copyright (c) 2013-2015 Atmel Corporation. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

  1. Redistributions of source code must retain the above copyright notice, this list of conditions, and the following disclaimer.
  2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions, and the following disclaimer in the documentation and/or other materials provided with the distribution
  3. The name of Atmel may not be used to endorse or promote products derived from this software without specific prior written permission.
  4. This software may only be redistributed and used in connection with an Atmel microcontroller product.

THIS SOFTWARE IS PROVIDED BY ATMEL “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT ARE EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. UL listed to the following standards: ANSI/UL 10C compliant (180 min fire doors), CAN/ULC S104 compliant (180 min fire doors) UL 294 performance level table:

Feature Level
Destructive Attack 1
Line Security 1
Endurance 4
Standby Power 1
Single Point Locking Device with Key Locks 1

Product compliance and limitations

Wiring methods shall be in accordance with the National Electrical Code (ANSI/NFPA70), local codes, and the authorities having jurisdiction.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. this device may not cause interference, and
  2. this device must accept any interference, including interference that may cause undesired operation of the device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1.  this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

CAUTION RISK OF EXPLOSION IF THE BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.

http://www.paxton.co.uk/productfinder.asp
http://paxton.info/1606

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals