CleanView®/PowerEase®/PowerLifter® Swivel Cleaning Filters l Support
- June 7, 2024
- Bissell
Table of Contents
Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
-
Remove & empty Dirt Tank
- Clean both the carbon and foam filters – located in the top lid of dirt tank
- Filters can be washed in warm water with mild dish soap > Allow to completely air dry (24 – 48 hours) before re-installing
- The carbon filter should be inserted 1st, then the foam filter
-
Remove & clean the Cyclone
- Open the bottom lid, reach in & twist cyclone to the left to remove
- Cyclone can be washed in warm water with mild dish soap > Allow to completely air dry (24 – 48 hours) before reinstalling
-
For replacement Filters > Go to Parts & Supplies
-
If you were having suction issues and the steps above did not resolve > Go to Lower Hose/Foot
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Loading......