BLAUPUNKT 5WF6X910 Washing Machine User Manual

5WF6X910 Washing Machine

“`html

Specifications:

• Operating voltage / frequency: 220-240
  V~/50Hz

• Total current: 10 A

• Water pressure: Maximum 1 Mpa / Minimum 0.1
  Mpa

• Total power: 2200 W

• Maximum washing capacity (dry laundry): 9
  kg

Product Usage Instructions:

Safety Instructions:

Read the user manual carefully before using the appliance. The
machine is for domestic use only; commercial use will void the
warranty. Pay attention to the model-specific features and
figures.

General Safety Warnings:

• Risk of Burns: Do not touch the drain hose or
  discharged water while the Washing Machine is running to avoid burn
  risks.

• Risk of Death from Electrical Current: The
  machine must be carried by at least 2 people to prevent
  accidents.

During Use:

Follow the advice given in the manual to protect yourself and
others from risks and injuries.

Packaging and Environment:

Remove packaging materials carefully. They are recyclable to
reduce waste production and environmental impact.

Frequently Asked Questions (FAQ):

Q: Where can I get a softcopy of the user manual?

A: Please contact washingmachine@standardtest.info with your
model name and serial number (20 digits) found on the appliance
door.

Q: What should I do if my appliance does not have all the

features described in the manual?

A: Pay attention to the figures and instructions that are
relevant to your specific model while using the appliance.

“`

Bedienungsanleitung User Manual Manuel d’utilisation Gebruikershandleiding
5WF6X910
:DV FKPDV FKLQH :DV KLQJ0DFKLQH 0DFKLQHj ODYHU :DV PDFKLQH

Thank you for choosing this product.
This User Manual contains important safety information and instructions on the operation and maintenance of your appliance.
Please take the time to read this User Manual before using your appliance and keep this book for future reference.

Icon

Type

WARNING

RISK OF ELECTRIC SHOCK

FIRE

CAUTION

IMPORTANT / NOTE

Meaning Serious injury or death risk
Dangerous voltage risk Warning; Risk of fire / flammable materials
Injury or property damage risk Operating the system correctly

CONTENTS
1.SAFETY INSTRUCTIONS ………………………………………………………………………………….. .1 1.1 General Safety Warnings …………………………………………………………………………………..2 1.2 During Use ……………………………………………………………………………………………………..7 1.3 Packaging and Environment……………………………………………………………………………….8 1.4 Savings Information…………………………………………………………………………………………..8
2.TECHNICAL SPECIFICATIONS………………………………………………………………………….. .9 2.1 General Appearance………………………………………………………………………………………….9 2.2 Technical Specifications …………………………………………………………………………………….9
3.INSTALLATION……………………………………………………………………………………………….. .10 3.1 Removing the Transit Bolts……………………………………………………………………………….10 3.2 Adjusting the Feet / Adjusting Adjustable Stays……………………………………………………10 3.3 Electrical Connection……………………………………………………………………………………….10 3.4 Water Inlet Hose Connection…………………………………………………………………………… .11 3.5 Water Discharge Connection…………………………………………………………………………….12
4.CONTROL PANEL OVERVIEW…………………………………………………………………………. .12 4.1 Detergent Drawer ………………………………………………………………………………………….. .12 4.2 Sections …………………………………………………………………………………………………….13 4.3 Program Dial…………………………………………………………………………………………………..13 4.4 Electronic Display ……………………………………………………………………………………………13
5.USING YOUR WASHING MACHINE………………………………………………………………….. .14 5.1 Preparing Your Laundry……………………………………………………………………………………14 5.2 Putting Laundry in the Machine …………………………………………………………………………14 5.3 Adding Detergent to the Machine …………………………………………………………………….. .15 5.4 Operating Your Machine …………………………………………………………………………………..15 5.5 Selecting a Programme ……………………………………………………………………………………15 5.6 Half-Load Detection System……………………………………………………………………………..15 5.7 Additional Functions ……………………………………………………………………………………….16 5.8 Child Lock …………………………………………………………………………………………………….18 5.9 Cancelling the Programme ………………………………………………………………………………18 5.10 Programme End ……………………………………………………………………………………………19
6.PROGRAMME TABLE……………………………………………………………………………………… .20 6.1 Important Informations……………………………………………………………………………………..23
7.CLEANING AND MAINTENANCE …………………………………………………………………….. .24 7.1 Warning …………………………………………………………………………………………………….24 7.2 Water Inlet Filters ……………………………………………………………………………………………24 7.3 Pump Filter …………………………………………………………………………………………………….25 7.4 Detergent Drawer ………………………………………………………………………………………….. .25
8.Body / Drum …………………………………………………………………………………………………… .26
9.TROUBLESHOOTING ……………………………………………………………………………………… .27
10.AUTOMATIC FAULT WARNINGS AND WHAT TO DO ………………………………………. .28
11.DESCRIBING THE ENERGY LABEL AND SAVING ENERGY…………………………….. .29

1. SAFETY INSTRUCTIONS

Operating voltage / frequency (220-240) V~/50Hz

Total current (A)

10

Water pressure (Mpa)

Maximum 1 Mpa / Minimum 0. 1Mpa

Total power (W)

2200

Maximum washing capacity (dry laundry) (kg)

9

· Do not install your machine on a carpet or such grounds that would prevent the ventilation of its base.
· The appliance is not intended for use by people (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
· Children of less than 3 years should be kept away unless continuously supervised.
· Call the nearest authorized service centre for a replacement if the power cord malfunctions.
· Use only the new water inlet hose coming with your machine when making water inlet connections to your machine. Never use old, used or damaged water inlet hoses.
· Children should not play with the appliance. Cleaning and user maintenance should not be made by children without supervision.

EN – 1

NOTE: For a softcopy of this user manual, please contact the following address: “washingmachine@standardtest. info”. In your e-mail, please provide the model name and serial number (20 digits) which you can find on the appliance door.
Read this user manual carefully.
Your machine is for domestic use only. Using it for commercial purposes will cause your warranty to be cancelled.
This manual has been prepared for more than one model therefore your appliance may not have some of the features described within. For this reason, it is important to pay particular attention to any figures whilst reading the operating manual.
1.1 General Safety Warnings
· The necessary ambient temperature for operation of your Washing Machine is 15-25 °C.
· Where the temperature is below 0 °C, hoses may split or the electronic card may not operate correctly.
· Please ensure that garments loaded into your Washing Machine are free from foreign objects such as nails, needles, lighters and coins.
· It is recommended that for your first wash, you select the 90° Cotton programme without laundry and half fill compartment II of the detergent drawer with a suitable detergent.
· Residue may build up on detergent and softeners
EN – 2

exposed to air for a long period of time. Only put softener or detergent in the drawer at the beginning of each wash. · Unplug your Washing Machine and switch off the water supply if the Washing Machine is left unused for a long time. We also recommend that you leave the door open to prevent build up of humidity inside the Washing Machine. · Some water may be left in your Washing Machine as a result of quality checks during production. This will not affect the operation of your Washing Machine. · The packaging of the machine could be hazardous to children. Do not allow children to play with the packaging or small parts from the Washing Machine. · Keep the packaging materials in a place where children cannot reach them, or dispose of them appropriately. · Use pre-wash programs only for very dirty laundry. Never open the detergent drawer while the machine is running. · In the event of a breakdown, unplug the machine from the mains supply and turn the water supply off. Do not attempt to carry out any repairs. Always contact an authorised service agent. · Do not exceed the maximum load for the washing programme you have chosen. Never force the door open when your Washing Machine is running. · Washing laundry containing flour may damage
EN – 3

your machine. · Please follow the manufacturers’ instructions
regarding the use of fabric conditioner or any similar products that you intend to use in your Washing Machine. · Make sure that the door of your Washing Machine is not restricted and can be opened fully. Install your machine in a location that can be fully ventilated and preferably has constant air circulation.
Read these warnings. Follow the advice given to protect yourself and others from risks and fatal injuries.
RISK OF BURNS
Do not touch the drain hose or any discharged water while your Washing Machine is running. The high temperatures involved pose a burn risk.
RISK OF DEATH FROM ELECTRICAL CURRENT
· Do not connect your Washing Machine to the mains electricity supply using an extension lead.
· Do not insert a damaged plug into a socket. · Never remove the plug from the socket by pulling
the cord. Always hold the plug. · Never touch the power cord/plug with wet
hands as this could cause a short circuit or electric shock. · Do not touch your Washing Machine if your hands or feet are wet. · A damaged power cord/plug can cause fire or give you an electric shock. When damaged
EN – 4

it must be replaced, this should only be done by qualified personnel. Risk of flooding · Check the speed of water flow before placing the drain hose in a sink. · Take necessary measures to prevent the hose from slipping. · Water flow may dislodge the hose if it is not properly secured. Make sure the plug in your sink does not block the plug hole. Danger of Fire · Do not store inflammable liquids near your machine. · The sulphur content of paint removers may cause corrosion. Never use paint removing materials in your machine. · Never use products that contain solvents in your machine. · Please ensure that garments loaded into your Washing Machine are free from foreign objects such as nails, needles, lighters and coins. Risk of fire and explosion Risk of falling and injury · Do not climb on your Washing Machine. · Make sure hoses and cables do not cause a trip hazard. · Do not turn your Washing Machine upside down or on its side. · Do not lift your Washing Machine using the door or detergent drawer.
EN – 5

The machine must be carried by at least 2 people.
Child safety · Do not leave children unattended near the
machine. Children might lock themselves in the machine resulting in risk of death. · Do not allow children to touch the glass door during operation. The surface becomes extremely hot and may cause damage to skin. · Keep packaging material away from children. · Poisoning and irritation may occur if detergent and cleaning materials are consumed or come into contact with the skin and eyes. Keep cleaning materials out of the reach of children.
1.2 During Use
· Keep pets away from your machine. · Please check the packaging of your machine
before installation and the outer surface of the machine once the packaging has been removed. Do not operate the machine if it appears damaged or if the packaging has been opened. · Your machine must only be installed by an authorised service agent. Installation by anyone other than an authorised agent may cause your warranty to be void. · This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the
EN – 6

hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision. · Only use your machine for laundry that is labelled as suitable for washing by the manufacturer. · Before operating the washing machine, remove the 4 transit bolts and rubber spacers from the rear of the machine. If the bolts are not removed they may cause heavy vibration, noise and malfunction of the machine and cause the guarantee to be void. · Your warranty does not cover damage caused by external factors such as fire, flooding and other sources of damage. · Please do not throw away this user manual; keep it for future reference and pass it onto the next owner. NOTE: Specifications for the machine may vary depending on the product purchased. Replacement of drive belt, only by authorized service. Only original spare belt must use.
1.3 Packaging and Environment Removal of packaging materials Packaging materials protect your machine from any damage that might occur during transportation. The packaging materials are environmentally friendly as they are recyclable. Use of recycled material reduces raw material consumption and decreases waste production.
EN – 7

1.4 Savings Information Some important information to get the most efficient use out of your machine: · Do not exceed the maximum load for the washing
programme you have chosen. This will allow your machine to run in energy saving mode. · Do not use the pre-wash feature for lightly soiled laundry. This will help you save on the amount of electricity and water consumed.
CE Declaration of conformity We declare that our products meet the applicable European Directives, Decisions and Regulations and the requirements listed in the standards referenced. Disposal of your old machine
The symbol of the crossed-out wheeled bin shown on the product or its packaging means that the device must not be disposed of with other household waste but requires separate collection. You can dispose of the device free of charge at your local waste return and collection system. The addresses can be obtained from your responsible city council or local government. Alternatively, you can return small waste electrical and electronic equipment (WEEE) with an edge length of up to 25 cm free of charge to any retailer with a sales area relating to electrical and electronic equipment (EEE) of at least 400 m² or to a food retailer that offers EEE at least several times a year with a total sales area of 800 m². Larger WEEE can be returned to a respective retailer free of charge when buying a new product of the same type. Regarding the modalities of the collection of WEEE in case of shipment of the newly bought product, please contact your retailer. If possible, please remove all batteries and accumulators as well as all removable lamps before disposing of the device. Please note that you are responsible for deleting all personal data on the device to be disposed of.
EN – 8

2. TECHNICAL SPECIFICATIONS

3

2

1

10. Transit Bolts 2.1 Technical Specifications

4

Operating voltage /

(220-240)

frequency V~/50Hz

(V/Hz)

5

Total current (A)

10

Water

Maximum: 1 Mpa

6

pressure

(Mpa)

Minimum : 0.1

Mpa

7

8

Total power (W)

2200

9

10

Maximum dry laundry

9

capacity (kg)

General Appearance 1. Electronic Display 2. Programme Dial 3. Upper Tray 4. Detergent Drawer 5. Drum 6. Pump Filter Cover 7. Water Inlet Valve 8. Power Cable 9. Discharging Hose

Spinning revolution (rev / min)

1400

Programme number

15

Dimensions (mm)

Height

845

Width

597

Depth

582

EN – 9

3. INSTALLATION
3.1 Removing the Transit Bolts

3.2 Adjusting the Feet / Adjusting Adjustable Stays

X4

X4

1

2

X4

3

4

1. Before operating the washing machine, remove the 4 transit bolts and rubber spacers from the rear of the machine. If the bolts are not removed, they may cause heavy vibration, noise and malfunction of the machine and void the warranty.
2. Loosen the transit bolts by turning them anticlockwise with an appropriate spanner.
3. Remove the transit bolts with a straight pull.
4. Fit the plastic blanking caps supplied in the accessories bag into the gaps left by the removal of the transit bolts. The transit bolts should be stored for future use.

NOTE: Remove the transit bolts
before using the machine for the first time. Faults occurring due to the machine being operated with transit bolts fitted are out of the scope of the warranty.

1
1. Do not install your machine on a surface (such as carpet) that would prevent ventilation at the base.
· To ensure silent and vibration-free operation of your machine, install it on a firm surface.
· You can level your machine using the adjustable feet.
· Loosen the plastic locking nut.
X4

2

3

2. To increase the height of the machine, turn the feet clockwise. To decrease the height of the machine, turn the feet anticlockwise.
· Once the machine is level, tighten the locking nuts by turning them clockwise.
3. Never insert cardboard, wood or other similar materials under the machine to level it.
· When cleaning the ground on which the machine is located, take care not to disturb the level of the machine.

3.3 Electrical Connection

· Your Washing Machine requires a 220240V, 50 mains supply.
EN – 10

· The mains cord of your washing machine is equipped with an earthed plug. This plug should always be inserted to an earthed socket of 10 amps.
· If you do not have a suitable socket and fuse conforming with this, please ensure the work is carried out by a qualified electrician.
· We do not take responsibility for damage that occurs due to the use of ungrounded equipment.
NOTE: Operating your machine
with low voltage will cause the life cycle of your machine to be reduced and its performance to be restricted. 3.4 Water Inlet Hose Connection
3/4″
2 1

10 mm

3

4

1. Your machine may have either a single water inlet connection (cold) or double water inlet connection (hot and cold) depending on the machine specifications. The white capped hose

should be connected to cold water inlet and red capped hose to the hot water inlet (if applicable). · To prevent water leaks at the joints, either 1 or 2 nuts (depending on your machine’s specifications) are supplied in the packaging with the hose. Fit these nuts to the end(s) of the water inlet hose that connect to the water supply.
2. Connect new water inlet hoses to a ¾ , threaded tap.
· Connect the white capped end of the water inlet hose to the white water inlet valve on the rear side of the machine and the red capped end of the hose to the red water inlet valve (if applicable).
· Hand tighten the connections. If in any doubt, consult a qualified plumber.
· Water flow with pressure of 0. 1-1 Mpa will allow your machine to operate at optimum efficiency (pressure of 0. 1 Mpa means that more than 8 litres of water per minute will flow through a fully opened tap).
3. Once you have made all of the connections, carefully turn the water supply on and check for leaks.
4. Ensure that the new water inlet hoses are not trapped, kinked, twisted, folded or crushed.
· If your machine has a hot water inlet connection, the temperature of the hot water supply should not be higher than 70°C.
NOTE: Your Washing Machine
must only be connected to your water supply using the supplied new fill hose. Old hoses must not be reused.

~ 95 cm ~ 145 cm

~ 140 cm ~ 95 cm

0 ­ max. 100 cm

~ 95 cm

~ 150 cm EN – 11

3.5 Water Discharge Connection

4.1 Detergent Drawer (*)

· Connect the water drain hose to a standpipe or to the outlet elbow of a household sink, using additional equipment.

· Never attempt to extend the water drain hose.

· Do not put the water drain hose from

1

your machine into a container, bucket or

bathtub.

2

· Make sure that the water drain hose is

not bent, buckled, crushed or extended.
3

· The water drain hose must be installed

at a maximum height of 100 cm from the ground.

4

4. CONTROL PANEL OVERVIEW

1

2

3

1. Detergent Drawer 2. Programme Dial 3. Electronic Display

5
6
1. Liquid Detergent Attachments () 2. Main Wash Detergent Compartment 3. Softener Compartment 4. Pre-Wash Detergent Compartment 5. Powder Detergent Levels () 6. Powder Detergent Scoop () () Specifications may vary depending on the machine purchased.

EN – 12

4.2 Sections Main wash detergent compartment:

4.3 Program Dial

This compartment is for liquid or powder detergents or limescale remover. The fluid detergent level plate will be supplied inside your machine. (*) Fabric conditioner, starch, detergent compartment:

· To select the desired programme, turn the programme dial either clockwise or anti-clockwise until the marker on the programme dial points to the chosen programme.
· Make sure that the programme dial is set exactly to the programme you want.
4.4 Electronic Display

1 8

This compartment is for softeners, conditioners or starch. Follow the instructions on the packaging. If softeners leave residue after use, try diluting them or using a liquid softener. Pre-wash detergent compartment:
2

34 56 7 9

This compartment should be used only when the pre-wash feature is selected. We recommend that the pre-wash feature is used only for very dirty laundry. (*) Specifications may vary depending on the machine purchased.

1. Electronic Display 2. Digital Display 3. Water Temperature Adjustment Button
4. RPM Speed Adjustment Button
5. Delayed Start Additional Function 6. Additional Function Button 1 7. Additional Function Button 2 8. Start/Pause Button
9. Start/Pause Button Lamp
The display panel shows the washing delay timer (if set), temperature selection, spin speed, any additional functions selected. The display panel shows “End” when the selected programme is complete. The display panel also indicates if a fault has occurred with your machine.

EN – 13

5. USING YOUR WASHING MACHINE
5.1 Preparing Your Laundry

eyes. 5. Remove the metallic or plastic hooks of
curtains or place them in a washing net or bag. 6. Reverse textiles such as pants, knitwear, t-shirts and sweat shirts. 7. Wash socks, handkerchiefs and other small items in a washing net.

1

2

Can be

Normal

bleached

Do not bleach

washing

Maximum

Maximum

3

4

ironing temperature
150°C

ironing temperature
200°C

Do not iron

DGVDSH

Can be dry cleaned

No dry cleaning

Dry flat

5

6

Drip dry

Hang to dry

Do not tumble dry

7
1. Follow the instructions given in the care labels on the clothing.
· Separate your laundry according to type (cotton, synthetic, sensitive, wool etc. ), washing temperature (cold, 30°, 40°, 60°, 90°) and the degree of dirtiness (slightly stained, stained, highly stained).

F
Dry cleaning in gas oil,
pure alcohol and R113 is
allowed

P

A

Perchloroethylene Perchlorinetyhlene

R11, R13,

R11, R113, Gas

Petroleum

oil

5.2 Putting Laundry in the Machine

2. Never wash coloured and white laundry together.
· Dark textiles may contain excess dye and should be washed separately several times.

3. Ensure that there are no metallic materials on your laundry or in the pockets; if so, remove them.
CAUTION: Any malfunctions
which occur due to foreign materials damaging your machine are not covered by the warranty. 4. Close zips and fasten any hooks and

· Open the door of your machine.
· Spread your laundry evenly in the machine.
NOTE: Take care not to exceed
the maximum load of the drum as this will give poor wash results and cause creasing. Refer to the washing programme tables for

EN – 14

information on load capacities. The following table shows approximate weights of typical laundry items:

LAUNDRY TYPE Towel Linen
Bathrobe Quilt cover Pillow slip Underwear Tablecloth

WEIGHT (gr) 200 500 1200 700 200 100 250

· Load each item of laundry separately.
· Check that no items of laundry are trapped between the rubber seal and the door.
· Gently push the door until it clicks shut.

will increase with higher washing loads. · Put softener in the middle compartment
of the detergent drawer. Do not exceed the MAX level. · Thick softeners may cause clogging of the drawer and should be diluted. · It is possible to use fluid detergents in all programmes without a pre-wash. To do this, slide the fluid detergent level plate () into the guides in compartment II of the detergent drawer. Use the lines on the plate as a guide to fill the drawer to the required level. () Specifications may vary depending on the machine purchased.
5.4 Operating Your Machine

click

1

2

· Make sure the door is fully closed, otherwise the programme will not start.
5.3 Adding Detergent to the Machine The amount of detergent you will need to put in your machine will depend on the following criteria: · If your clothes are only slightly soiled,
do not pre-wash. Put a small amount of detergent (as specified by the manufacturer) into compartment II of the detergent drawer.
· If your clothes are excessively soiled, select a programme with pre-wash and put ¼ of the detergent to be used into compartment I of the detergent drawer and the rest in compartment II.
· Use detergents produced for automatic washing machines. Follow the manufacturer’s instructions on the amount of detergent to use.
· In areas of hard water, more detergent will be required.
· The amount of the detergent required

1. Plug your machine in to the mains supply.
2. Turn on the water supply. · Open the machine door. · Evenly spread your laundry in the
machine. · Gently push the door until it clicks shut.
5.5 Selecting a Programme Use the programme tables to select the most appropriate programme for your laundry.
5.6 Half-Load Detection System Your machine features a half-load detection system. If you put less than half the maximum load of laundry into your machine it will automatically set the half-load function, regardless of the programme you selected. This means that the selected programme will take less time to complete and will use less water and energy.

EN – 15

(*)Machinery specifications may vary depending on the product purchased.
5.7 Additional Functions 1. Temperature Selection Use the washing water temperature adjustment button to alter the automatically programmed washing water temperature.

3. Delay Timer

When you select a programme the maximum temperature for that programme is automatically selected. To adjust the temperature, press the water temperature adjustment button until the desired temperature is displayed on the digital display. You can gradually decrease the washing water temperature between the maximum washing water temperature of the selected programme and cold washing (- – C) selections by pressing the temperature adjustment button. 2. Spin Speed Selection
When you select a programme, the maximum spin speed is automatically selected. To adjust the spin speed between the maximum spin speed and the cancel spinning option (- – -), press the Spin speed button until the desired speed is displayed. If you have skipped the spin speed you want to set, keep pressing the spin speed adjustment button until the desired spin speed is displayed again.

You can use this auxiliary function to delay the start time of the washing cycle for 1 to 23 hours .
To use the delay function: · Press the delay key once.
· “01h” will be displayed. will light up on the electronic display.
· Press the delay key until you reach the time after which you want the machine to start the washing cycle.
· If you have skipped the delay time you would like to set, you can keep pressing the delay key until you reach that time again.
· To use the time delay function, you need to press the Start/Pause key to start the machine.
· If you want to cancel the delay:
– If you have pressed the Start/Pause key to start the machine, you just need to press the delay key once. will go off on the electronic display.
– If you have not pressed the Start/ Pause key, press the delay key continuously until goes off on the electronic display. will go off on the electronic display.
NOTE: In the case that you want
to select the auxiliary function feature, if the auxiliary function LED is not on, this means that this feature is not being used in the washing programme you have selected.

EN – 16

4. Anti- Allergic(*)

6. Pre-Wash(*)

Auxiliary function button 4 or 5 Pre-Wash

Auxiliary function button 4 or 5 Anti- Allergic
You can add an additional rinse operation to your laundry using this additional function. Your machine will carry out all rinsing steps with hot water. We recommend this setting for laundry worn on delicate skin, baby clothes and underwear. To select this function, press the Antiallergic button when the symbol is displayed. 5. Easy Ironing(*)

This additional function allows you to give heavily soiled laundry a pre-wash before the main washing programme takes place. When using this function, put detergent in front washing compartment of the detergent drawer. To select this function, press the Pre-wash button when the symbol is displayed.
7. Extra Rinse(*)

Auxiliary function button 4 or 5 Easy Ironing

Auxiliary function button 4 or 5 Extra Rinse

Using this function will result in your laundry being less wrinkled at the end of the selected washing programme. To select this function, press the Easy ironing button when the symbol is displayed.

You can add an additional rinse operation to the end of the selected wash programme using this additional function. To select this function, press the Extra rinse button when the symbol is displayed.
8. Rapid Wash(*)

Auxiliary function button 4 or 5 Rapid Wash
You can wash your laundry in a shorter time, using less energy and water by selecting this additional function. We recommend that you only use this option if you are washing less than half the maximum dry load for the selected programme. To select this function, press the Rapid wash button when the symbol is displayed.
EN – 17

NOTE: If you put less than
half the maximum load of laundry into your machine the half-load function will be automatically set, regardless of the programme you selected. This means that the selected programme will take less time to complete and will use less water and energy. When your machine detects half load, the symbol is displayed automatically.
9. No Spin()
Auxiliary function button 4 or 5 No Spin
If you don’t want to perform wringing on your laundry, you can use this auxiliary function. You may make the programme active by pressing the wringing cancel button on the display panel when the led light of the symbol turns on. 10. Cold Wash()

Start/Pause button
By pressing on the Start/Pause button, you may start the programme you have selected or suspend a running programme. If you switch your machine to the standby mode, the Start/Pause led on the electronic display will blink.
5.8 Child Lock The Child Lock function allows you to lock the buttons so that the wash cycle you have chosen cannot be changed unintentionally. To activate child lock, press and hold button 4 and 5 simultaneously for at least 3 seconds. `’CL” will flash on the electronic display for 2 seconds when the child lock is activated.

Auxiliary function button 4 or 5 Cold Wash
You can use this auxiliary function when you want to wash your laundry with cold water (tap water). You may make the programme active by pressing the cold washing button on the display panel when the led light of the symbol turns on. (*)Machinery specifications may vary depending on the product purchased.

If any button is pressed or selected programme is changed by the programme dial while the child lock is active, the “CL” symbol will flash on the electronic display for 2 seconds.
If the child lock function is active and a programme is running, when the programme dial is turned to the CANCEL position and another programme is selected the previously selected programme continues from where it was left.
To deactivate the child lock, press and hold button 4 and 5 simultaneously for at least 3 seconds until the “CL” symbol on the electronic display disappears.

EN – 18

5.9 Cancelling the Programme To cancel a running programme at any time: 1. Turn the programme dial to the
“STOP” position. 2. Your machine will stop the washing
operation and the programme will be cancelled. 3. Turn the programme dial to any other programme to drain the machine. 4. Your machine will perform the necessary draining operation and cancel the programme. 5. You can now select and run a new programme. 5.10 Programme End
Your machine will stop by itself as soon as the programme you have selected finishes. · “END” will flash on the electronic
display. · You can open the machine’s door and
remove the laundry. · Leave the door of your machine open
to allow the inner part of your machine to dry. · Switch the programme dial to STOP position. · Unplug your machine. · Turn the water tap off.
EN – 19

6. PROGRAMME TABLE

Washing temperature
(°C) Maximum dry laundry amount
(kg) Detergent compartment Programme duration (Min.)

Programme

Laundry type / Descriptions

COTTON Eco 40-60
ECO 40-60 COTTON Pre-
Wash COTTON 20 COLOURS
WOOL RINSE ALLERGY SAFE
Spin/Drain
HAND WASH Easy Care /
Outdoor Duvet
Jeans / Dark Garments
(**)FAST 60′ 60°C
(***) Rapid 15 min.

60-90-80-70-40 40 – 60
60 – 50 – 40 – 30 “- -C”
20- “- -C” 40 – 30 – “- -C”
30 – “- -C” ”- -C”
60 – 50 – 40 – 30 “- -C”
”- -C”
30 – “- -C” 40 – 30 – “- -C” 40 – 30 – “- -C”
30 – “- -C” 60 – 50 – 40 – 30 –
“- -C” *30 – “- -C”

Very dirty, cotton and flax textiles.

9

2 145 (Underwear, linen, tablecloth, towel

(maximum 4,5 kg), bedclothes, etc.)

Dirty cotton and flax textiles.

9

2 228 (Underwear, linen, tablecloth, towel

(maximum 4,5 kg), bedclothes, etc.)

Dirty cotton and flax textiles.

9

1 & 2 164 (Underwear, linen, tablecloth, towel

(maximum 4,5 kg), bedclothes, etc.)

Less dirty, cotton and linen textiles.

4,5

2

59

(Underwear, bedsheet, tablecloth,

towel (max. 2,0 kg) bedcloth, etc.)

Less dirty, cotton and linen textiles.

9

2 130 (Underwear, bedsheet, tablecloth,

towel (max. 4,5 kg) bedcloth, etc.)

2,5

2

48

Woollen laundries with machine wash labels.

Provides an additional rinse to any

9

–

30

type of laundry after the washing

cycle.

4

2 212

Baby laundry

9

–

2,5

2

3,5

2

–

2

3,5

2

4

2

2

2

EN – 20

You can use this program for

any type of laundry if you want

an additional spin step after the

washing cycle./ You can use the

drain program to drain the water

accumulated inside the machine

17

(adding or removing laundry). To

enable the drain program, turn

the program knob to the spin/

drain program. After you select

“spin cancelled” using the auxiliary

function key, the program will start

to run.

90

Laundry recommended for hand wash or sensitive laundry.

Very dirty or synthetic-mixed textiles.

135

(Nylon socks, shirts, blouses,

synthetic-including trousers etc. )

For washing a fibre duvet with 100 a machine washable label. (max.
2.5 kg)

Black and dark items made of

cotton, mixed fibre or jeans. Wash

96

inside out., Jeans often contains excess dye and may run during the

first few washes. Wash light and

dark coloured items separately

Dirty, cotton, coloured and linen

60

textiles washed at 60°C in 60

minutes.

In a short time of 15 minutes, Lightly

15

soiled, cotton, colored and linen

textiles your can wash.

NOTE: PROGRAMME DURATION MAY CHANGE ACCORDING TO THE AMOUNT OF LAUNDRY, TAP WATER, AMBIENT TEMPERATURE AND SELECTED ADDITIONAL FUNCTIONS.
() Washing water temperature of the programme is the factory default. () If your machine has the rapid wash auxiliary function, you can enable the quick wash option on the display panel and load the machine with 2 kg or less laundry to wash it in 30 minutes. () Due to the short washing time of this programme, we recommend that less detergent is used. The programme may last longer than 15 minutes if your machine detects an uneven load. You can open the door of your machine 2 minutes after the completion of a washing operation. (The 2 minute period is not included in the programme duration). According to regulation 1015/2010 and 1061/2010, the programme 1 and the programme 2 are respectively the Standard 60°C cotton programme’ and the Standard 40°C cotton programme’. The Eco 40-60 programme is able to clean normally soiled cotton laundry declared to be washable at 40°C or 60°C, together in the same cycle, and that this programme is used to assess the compiance with the EU ecodesign legislation.
EN – 21

· The most efficient programmes in terms of energy consumption are generally those that perform at lower temperatures and longer duration.
· Loading the household washing machine up to the capacity indicated by the manufacturer for the respective programmes will contribute to energy and water savings.
· Program duration, energy consumption and water consumption values may vary according to wash load weight and type, selected extra functions, tap water and ambient temperature.
· It’s recommended to use liquid detergent for the washing programmes at low temperature. The amount of detergent to be used may vary depending on the amount of laundry and the level of dirtiness of the laundry. Please follow the detergent manufacturers’ recommendations for the amount of the detergent to be used.
· The noise and remaining moisture content are influenced by the spinning speed. The higher spinning speed in the spinning phase, the higher noise and the lower remaining moisture content.
· You can access the product database where the model information is stored by reading the QR code on the energy label.

Energy Consumption
kWh/cycle

Programme Duration
Hours:Minutes

Water Consumption
Litres/Cycle

max. Temperature
°C

Remaining Moisture Content
%
1400 Rpm

Programme Name Rated
Capacity kg

1/4 Load Rated
Capacity 1/2 Load 1/4 Load
Rated Capacity 1/2 Load 1/4 Load
Rated Capacity 1/2 Load 1/4 Load

1/4 Load Rated
Capacity 1/2 Load

1/2 Load

Rated Capacity

90

Cotton Cotton

60

Eco 40-60

9 2,35

03:13

71

81

53%

9 0,8

02:25

47

57

53%

9 0,91 0,39 0,20 03:48 02:54 02:54 56 44 41 41 28 23 53% 53% 53%

3,5 0,91

02:15

72

45

53%

4 1,11 4,5 0,13

01:00 00:59

35

58

53%

38

20

53%

Outdoor

Cotton Fast 60 Easy Care /

20

EN – 22

6.1 Important Informations · Use detergents, softeners and other additives suitable for automatic washing machines
only. Excessive foam has occurred and automatic foam absorption system has been activated due to too much detergent usage. · We recommend that periodic cleaning for washing machine every 2 months. For periodic cleaning please use Drum Clean programme. If your machine do not have Drum Clean programme, use Cottons-90 programme. When required, use limescale removers manufactured specifically for washing machines only. · Never force the door open when your Washing Machine is running. You can open the door of your machine 2 minutes after the completion of a washing operation. · Never force the door open when your Washing Machine is running. The door will open immediately after the washing cycle has ended. · The installation and repairing procedures should always carried out by the Authorised Service Agent in order to avoid possible risks. The manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorised persons. (*) Specifications may vary depending on the machine purchased.
EN – 23

7. CLEANING AND MAINTENANCE
7.1 Warning

7.2 Water Inlet Filters Water inlet filters prevent dirt and foreign materials from entering your machine. We recommend that these filters are cleaned when your machine is unable to receive sufficient water, although your water supply is on and the tap is open. We recommend that you clean your water inlet filters every 2 months.

Turn your mains power supply off and remove the plug from the socket before carrying out maintenance and cleaning of your machine.
Turn off the water supply before starting maintenance and cleaning of your machine.
CAUTION: Do not use solvents, abrasive cleaners, glass cleaners or all-purpose cleaning agents to clean your Washing Machine. They may damage the plastic surfaces and other components with the chemicals they contain.

· Unscrew the water inlet hose(s) from the Washing Machine.
· To remove the water inlet filter from the water inlet valve, use a pair of longnosed pliers to gently pull on the plastic bar in the filter.
· A second water inlet filter is located in the tap end of the water inlet hose. To remove the second water inlet filter, use a pair of long-nosed pliers to gently pull on the plastic bar in the filter.
· Clean the filter thoroughly with a soft brush and wash with soapy water and rinse thoroughly. Re-insert the filter by gently pushing it back into place.
CAUTION: The filters at the
water inlet valve may become clogged due to water quality or lack of required maintenance and may break down. This may cause a water leak. Any such breakdowns are out of the scope of the warranty.

EN – 24

7.3 Pump Filter
1

meet the holes on the front panel side. 6. Close the filter cover.

WARNING: The water in

the pump may be hot, wait until it has

2

cooled down before carrying out any cleaning or maintenance.

3

4

5

6

The pump filter system in your Washing Machine prolongs the life of the pump by preventing lint from entering your machine. We recommend that you clean the pump filter every 2 months. The pump filter is located behind the cover on the front-lower right corner. To clean the pump filter: 1. You may use the washing powder
spade (*) supplied with your machine or liquid detergent level plate to open the pump cover.
2. Lodge the end of the powder spade or liquid detergent level plate in the opening of the cover and gently press backwards. The cover will open.
· Before opening the filter cover, place a container under the filter cover to collect any water left in the machine.
· Loosen the filter by turning anticlockwise and remove by pulling. Wait for the water to drain.
NOTE: Depending on the
amount of water inside the machine, you may have to empty the water collection container a few times. 3. Remove any foreign materials from
the filter with a soft brush. 4. After cleaning, re-fit the filter by
inserting it and turning clockwise. 5. When closing the pump cover, ensure
that the mountings inside the cover

(*) Specifications may vary depending on the machine purchased. 7.4 Detergent Drawer The use of detergent may cause residual build up in the detergent drawer over time. We recommend that you remove the drawer every 2 months to clean the accumulated residue. To remove the detergent drawer: · Pull the drawer forwards until it is fully
extended.
· Press the region shown below inside the detergent drawer you have pulled all the way back, and continue pulling and remove the detergent drawer from its place
· Remove the detergent drawer and disassemble the flush stopper. Clean thoroughly to completely remove

EN – 25

any softener residue. Refit the flush stopper after cleaning and check that it is seated properly.

8. Body / Drum

· Rinse with a brush and lots of water.
· Collect the residues inside the detergent drawer slot so that they don’t fall inside your machine.
· Dry the detergent drawer with a towel or dry cloth and place it back
Do not wash your detergent drawer in a dishwasher. Liquid detergent apparatus() For the cleaning and maintenance of the liquid level detergent apparatus, remove the apparatus from its location as shown in the picture below, and thoroughly clean the remaining detergent residues. Replace the apparatus. Make sure that no residual material remains inside the siphon. () Specifications may vary depending on the machine purchased.

1

2

1. Body
Use a mild, non-abrasive cleaning agent, or soap and water, to clean the external casing. Wipe dry with a soft cloth. 2. Drum
Do not leave metallic objects such as needles, paper clips, coins etc. in your machine. These objects lead to the formation of rust stains in the drum. To clean such rust stains, use a non-chlorine cleaning agent and follow the instructions of manufacturer of the cleaning agent. Never use wire wool or similar hard objects for cleaning rust stains.

EN – 26

9. TROUBLESHOOTING
Repair of your machine should be carried out by an authorised service company. If your machine requires repair or if you cannot solve an issue with the information provided below, then you should: · Unplug your machine from the mains power supply.
· Turn off the water supply.

FAULT

POSSIBLE CAUSE

TROUBLESHOOTING

Your machine does not start.

Machine not plugged in. Fuses are faulty.
No mains power supply. Start/Pause button not pressed.

Plug machine in. Replace the fuses. Check mains power. Press the Start/Pause button.

Programme dial `stop’ position. Turn the programme dial to the desired position.

The machine door is not completely closed.

Close the machine door.

Water tap is turned off.

Turn tap on.

Water inlet hose may be twisted.

Check water inlet hose and untwist.

Your machine does not intake water.

Water inlet hose clogged. Inlet filter clogged.

Clean water inlet hose filters. () Clean the inlet filters. ()

The machine door is not completely closed.

Close the machine door.

Your machine does not discharge water.

Drain hose clogged or twisted. Pump filter clogged.
Laundry is too tighly packed together in the drum.

Check the drain hose, then either clean or untwist.
Clean the pump filter. (*) Spread your laundry in the machine evenly.

The feet have not been adjusted.

Adjust the feet. (**)

Transit bolts fitted for transportation have not been
removed.

Remove the transit bolts from the machine. (**)

Your machine vibrates.

Small load in the drum. Your machine is overloaded with
laundry or laundry is unevenly spread.

This will not prevent operation of your machine.
Do not overload the drum. Spread laundry evenly in the drum.

Your machine rests on a hard surface.

Do not set up your Washing Machine on a hard surface.

Excessive foam is formed in the detergent drawer.

Excessive amount of detergent used.
Wrong detergent used.

Press the Start/Pause button. To stop the foam, dilute one tablespoon of softener into 1/2 litre of water and pour into the detergent drawer. Press
the Start/Pause button after 5-10 mins.
Only use detergents produced for automatic Washing Machines.

Your washing is too dirty for the Use the information in the programme tables to

programme selected.

select the most appropriate programme.

Unsatisfactory washing result.

Amount of detergent used insufficient.

Use the amount of detergent as instructed on the packaging.

There is too much laundry in your

Check that the maximum capacity for the

machine.

selected programme has not been exceeded.

EN – 27

FAULT

POSSIBLE CAUSE

TROUBLESHOOTING

Unsatisfactory washing result.

Hard water. Your laundry is too tightly packed
together in the drum.

Increase the amount of detergent following the manufacturer’s instructions.
Check that your laundry is spread out.

As soon as the machine is loaded with water, water
discharges.

The end of water drain hose is too Check that the drain hose is at a suitable height.

low for the machine.

(**) .

No water appears in the drum during washing.

No fault. Water is in the unseen part of the drum.

. . . . . . . . . . . . . . . . . . . . .

Laundry has detergent residue.

Non-dissolving particles of some detergents may appear on your
laundry as white spots.

Perform an extra rinse, or clean your laundry with a brush after it dries.

Grey spots appear on the laundry.

There is untreated oil, cream or Use the amount of detergent as instructed on the

ointment on your laundry.

packaging in the next wash.

The spin cycle does not take place or takes place later than expected.

No fault. The Unbalanced load control system has been activated.

The Unbalanced load control system will try to spread your laundry. The spinning cycle will begin
once your laundry is spread. Load the drum evenly for the next wash.

(*) See the chapter regarding maintenance and cleaning of your machine. (**) See the chapter regarding installation of your machine.
10. AUTOMATIC FAULT WARNINGS AND WHAT TO DO
Your Washing Machine is equipped with a built-in fault detection system, indicated by a combination of flashing wash operation lights. The most common failure codes are shown below.

TROUBLE CODE

POSSIBLE FAULT

WHAT TO DO

Shut the door properly until you hear a click. If

E01

The door of your machine is not shut properly.

your machine persists to indicate fault, turn off your machine, unplug it and contact the nearest

authorised service agent immediately.

Check the tap is fully turned on. Mains water

E02

The water pressure or the water level inside the machine may be low.

may be cut-off. If the problem still continues, your machine will stop after a while automatically. Unplug
the machine, turn off your tap and contact the

nearest authorised service agent.

E03

The pump is faulty or pump filter is clogged or electrical connection of the
pump is faulty.

Clean the pump filter. If the problem persists, contact the nearest authorised service agent. (*)

Your machine will discharge water by itself. Once

E04

Your machine has excessive amount of the water has drained, turn off your machine and

water.

unplug it. Turn off the tap and contact the nearest

authorised service agent.

(*) See the chapter regarding maintenance and cleaning of your machine.

EN – 28

The minimum period which must supply the spare parts for the household washing
machine is 10 years.

www.blaupunkt-einbaugeraete.co service.DE@blaupunkt-einbauger

52518608

Service

www.blaupunkt-einbaugeraete.com

00 800 32 289 000

Deutschland/Germany service.DE@blaupunkt-einbaugeraete.com
Österreich/Austria service.AT@blaupunkt-einbaugeraete.com
Niederlande/Netherlands service.NL@blaupunkt-einbaugeraete.com
Belgien/Belgium service.BE@blaupunkt-einbaugeraete.com
Schweden/Sweden service.SE@blaupunkt-einbaugeraete.com
Luxemburg/Luxembourg service.LU@blaupunkt-einbaugeraete.com
Schweiz/Switzerland service.CH@blaupunkt-einbaugeraete.com

Italien/Italy service.IT@blaupunkt-einbaugeraete.com
Spanien/Spain service.ES@blaupunkt-einbaugeraete.com
Großbritannien/Grat Britain service.GB@blaupunkt-einbaugeraete.com
Malta/Malta service.MT@blaupunkt-einbaugeraete.com
Dänemark/Denmark service.DK@blaupunkt-einbaugeraete.com
Norwegen/Norway service.NO@blaupunkt-einbaugeraete.com
Frankreich/France sav@blaupunkt-electromenager.fr Telefon: (+33) 0800 303 603

1800 252 878 658
Australien/Australia CustomerCare@blaupunktAU.com

1800 209 2096
Indien/India

References

• electromenager.fr is available for purchase - Sedo.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>