DARTWOOD Waterproof Bone Conduction Wireless Headphone 16GB User Manual

DARTWOOD Waterproof Bone Conduction Wireless Headphone 16GB

In the Box

Safety Information

• Read and follow the instructions carefully.
• Prolonged exposure to high volume levels could cause permanent hearing damage.
• Do not use these headphones in corrosive liquid, such as salt water.
• Use of headphones while operating a vehicle is not recommended and is illegal in some areas. Check and obey the applicable laws and regulations on the use of headphones and earphones while operating a vehicle.
• Only use the magnetic charging cable provided to charge the headphones.
• Frequent charging may reduce the battery performance.
• Do not expose the headphones to direct heat.
• Keep the charging ports and the headphones clean and dry.
• Do not dismantle the headphones yourself for any reason.
• Do not clean the headphones with oil, or any corrosive cleaning agents.
• Do not use the headphones in any potentially hazardous places.

Introduction to Parts

1. Function keys
2. Microphone
3. Indicator light
4. Magnetic charging port
5. Headphone drum

Wearing Guide

Put the headphones around your head and move the drums around your ears as shown. Adjust the headphones to get the best spot for hearing.

Pairing

Upon first use, press and hold the Function key for 3 seconds. The indicator light will flash white and blue, meaning the headphones are on. Search for “Dartwood BC-X8” in the Bluetooth menu of your mobile device. You will hear “connected” once it is paired.

• The headphones will automatically connect to your device when turning on next time.

Pair multiple devices
To pair more than one mobile device, turn off the Bluetooth from the first paired device. Then the indicator light will flash white and blue, search for “Dartwood BC-X8” from the second device and connect.

Charging

1. Fully charge the headphones before using them for the first time.
2. Only use the magnetic charging cable provided to charge the headphones.
3. Snap the magnetic end to the charging port and connect to the power source.
4. The indicator light will be solid white when charging, it will turn to solid blue once it is fully charged.
5. The headphones take about 2 hours to fully charge.

Bluetooth / Music (MP3) Mode

To play the music from the built-in storage, add the supported song files (MP3/FLAC/APE) to the headset.

1. Connect the headphones with the charging cable to your computer.
2. A white LED will flash when connected to the computer.
3. Drag the song files into the mass folder.
4. When playing, double-click the Function key to switch between music mode and Bluetooth mode.

Function Keys

– Key

• Press once: Volume down
• Press twice: Play previous song
• Press and hold: Turn gaming mode on / off (BT mode only)

+ Key

• Press once: Volume up
• Press twice: Play next song
• Press and hold: Activate Siri / voice assistant (BT mode only)

Function Key

• Press once: Play, pause, answer a call (BT mode only)
• Press twice: Switch to music / Bluetooth mode
• Press and hold: Power on / off

Indicator Light

status
Blue light flash| Headphones are in the game’s low latency mode
Solid white| Charging
Solid Blue| Fully charged

Frequently Asked Questions

• Why can’t I pair my headphones?
  Make sure the indicator light is flashing white and blue. If you have paired the headphones before, turn off the paired device first. If you are not sure which devices are connected, go to a room without any other devices – it will be easier to pair a new one.

• Can these headphones be used while bathing or swimming?
  These headphones are waterproof and can be used while bathing or swimming. Avoid using in salt water. Clean with a damp cloth and let dry after use.

• Why is there no sound coming from my headphones when playing?
  The volume is most likely too low. Increase the volume and adjust the headphone drums to the best spot for hearing.

• Why can’t I switch to Music (MP3) Mode?
  Make sure the device has audio tracks stored in its memory. Double click the Function key and you will hear “music” once switched, check / adjust the volume if you still can’t hear anything.

Specifications

• Model: BC-X8

• Bluetooth version: 5.3

• Memory storage: 16 GB built-in (around 3200 songs)

• Weight: 1.0 oz

• Battery capacity: 135 mAh lithium

• Charging time: 2 hours

• Playtime: 6 hours

• Format: MP3 / FLAC / APE

• Mic sensitivity: -42 dB ±3 dB

• Waterproof level: IPX8 (up to 6.6 ft)

• Product dimensions: 5.19 x 4.72 x 1.85 in

• Connection distance: Up to 32.8 ft

• Charging input: 5 V 1 A

• Materials: ABS (housing), silicone (drum), titanium (frame)

• Specifications are subject to change without notice. Battery life and charge cycles vary by settings and the actual environment.

• All pictures shown are for illustration purposes only. Actual products may vary due to product enhancement.

Get More Support

Scan the QR code below or email us at contact@wasserstein- home.com

www.wasserstein-home.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>