GENERAL HT220S Digital Room Thermostat User Manual
- June 3, 2024
- GENERAL
Table of Contents
HT220S Digital Room Thermostat
User Manual
DIGITAL ROOM THERMOSTAT
generallife.com.tr
HT220S USER MANUAL
GENERAL SPECIFICATIONS
HT220S is a wired room thermostat. The user can adjust the room temperature with the required temperature and get more comfortable and economic heating/cooling.
- Precise Temperature Measurement
- Heating calibration
- Heating/Cooling Modes
- ON/OFF Control
- Wired Connection
- TPI Algorithm
HT220S Room Thermostat| Alkaline Battery| Dowels and Screws
TECHNICAL DATA
| Dimensions | 85mm / 125mm / 24mm |
|---|---|
| Operating Current | 3V DC (2 x AAA alkaline battery) |
| Relay NO Switching Current | 2A (30VDC — Resistive load) |
0.5A (125VAC — Resistive load)
Temperature Measurement Accuracy| 0.1°C
Operating Temperature Range| (5°C) — (30°C)
Battery Life| 1 Year (2 x AAA)
Operating Temperature| (-10°C) — (+50°C)
Storage Temperature| (-20°C) — (+60°C)
ROOM THERMOSTAT
| 1 | **** | Battery Indicator |
|---|---|---|
| 2 | Heating Indicator |
– If the Heating Indicator is blinking, the heating unit is working.
– If the Heating Indicator is steady, the heating unit is not working.
3| ****| Cooling Indicator
– If the Cooling Indicator is blinking, the cooling unit is working.
– If the Cooling Indicator is steady, the cooling unit is not working.
4| | Room Temperature
5| | Set Temperature
6| | ON/OFF and Temperature Setting Button
ROOM THERMOSTAT PLACEMENT
Room Thermostat needs to be placed in the room which is used most frequently.
For instance; living room or lounge. Placing the Room Thermostat in a spot
that have air circulation like entrance of a room or side of window should be
avoided. Also anywhere close to heating/cooling units such as radiator, stove
and spots which get direct sun lights would not be suitable. Room Thermostat
needs to be located above the floor 150 cm height. Few trials may be made to
find the most convenient spot.
BATTERY PLACEMENT
Before starting, power off the device connected to the Room Thermostat and make sure that the energy is cut off.
As shown in the picture above, press the screwdriver forward from the space
shown, bend the tabs and separate the front cover. Insert 2 new AAA alkaline
batteries in the battery housing with the correct battery direction. Replace
both batteries at the same time. Then align the front part of your Room
Thermostat to the back and squeeze it towards the back.
Low Battery Warning: When the “ ” icon appears on the screen, it means “low
battery warning”. It is recommended to replace the batteries when this warning
appears.
Warning: When the product is not used for a long period (more than 15 days),
remove the batteries. Otherwise, malfunctions that may occur would be out of
warranty.
Please throw your dead batteries into the waste bin for batteries.
ROOM THERMOSTAT WIRING DIAGRAM
Warning!
Operations within the heating / cooling unit or the electrical installation
must be carried out by professionally qualified persons.
ROOM THERMOSTAT TEMPERATURE CALIBRATION
Temperature sensors which are used in Room Thermostats are highly sensitive.
You may need to calibrate your Room Thermostat if you would like to get the
same temperature values with other thermometers in your living space.
- While your device is turned off, press and hold the button for 3 seconds.
- Press the button until the “ ” menu appers. In order to see the desired temperature, set the temperature difference by turning the o button to right or left. This value can be arranged between “-8 C” and o “+8 C”.
- To save the settings and exit, press the “On/Off” button until the device turns off. o
Note: Recommended tempreture calibration is “0.0 C”.
ROOM THERMOSTAT HEATING / COOLING MODES
Your Room Thermostat has heating and cooling modes. In order to switch easily
between heating and cooling modes:
- While your device is turned off, press and hold the button for 3 seconds.
- Press the button until the “ ” menu appears.
- You can switch between “ ” (heating) and “ ” (cooling) modes by turning the button to right or left in the “ ” menu.
- To save the settings and exit, press the button until the device turns off.
- The settings you have made have been saved. Once you turned on your device, it will operate with the changed settings.
FACTORY SETTINGS RESET
You can reset your Room Thermostat to its default factory settings.
This operation resets the calibration setting and heating/coling modes to
factory setting. To reset your Room Thermostat to factory setting:
- While your device is turned off, press and hold the button for 3 seconds.
- Press the button until the “ ” menu appears.
- While in the “ “ menu, turn the button to right or left in order to select “ “ option and press the button.
- Your device will be turned off and reset to factory settings.
TPI ROOM THERMOSTAT WORKING LOGIC
Your Room Thermostat works with the TPI algorithm. Room Thermostats using TPI
technology predict when the temperature of your home will rise above or below
the set temperature and turn the heating / cooling unit on and off
accordingly. This ensures that your home stays at the temperature you set
without maximum deviations up and down.
What is TPI?
TPI technology is designed to ensure that you get the best possible energy
efficiency from your heating / cooling system. It measures and applies the best
possible timings to deliver and maintain your home at the set temperature
level.
How does TPI work?
Thanks to the advanced artificial intelligence technology found in the
software, it adapts to the temperature change of the environment in which it
is located. By creating a general temperature map of your home, it learns how
long it takes to reach the desired room temperature and how to maintain this
temperature. In this way, it provides minimum energy consumption by
calculating how long your heating / cooling unit should work for.
What is the difference?
In non-TPI room thermostats, the heating / cooling unit works and stops
continuously until it exceeds the set temperature value. If the set
temperature drops below a certain amount, the heating / cooling unit will work
again. This creates greater temperature fluctuations and less energy control.
TPI Room Thermostats, on the other hand, provide higher savings and comfort
compared to On/Off room thermostats with the advantages it has.
Heating Mode
Your room thermostat takes the average room temperature of last 40 seconds as
basis. With the TPI algorithm in the product by creating a general temperature
map of your home, it learns how long it takes to reach the desired room
temperature and how this temperature is maintained. Thus, it ensures that the
room temperature remains within a certain range.
TPI ROOM THERMOSTAT HEATING MODE WORKING GRAPHIC
TEMPERATURE (ºC)……………… Desired Temperature………………………… TPI Room
Thermostat
Cooling Mode
Your room thermostat takes the average room temperature of last 40 seconds as
basis. With the TPI algorithm in the product by creating a general temperature
map of your home, it learns how long it takes to reach the desired room
temperature and how this temperature is maintained. Thus, it ensures that the
room temperature remains within a certain range.
TPI ROOM THERMOSTAT COOLING MODE WORKING GRAPHIC
TEMPERATURE (ºC) ……….. Desired Temperature……………..TPI Room Thermostat
WHAT TO KNOW ABOUT TPI ROOM THERMOSTAT
- If the placement of the TPI Room Thermostats is changed, the learning process will restart. The learning process should be considered as 7 days.
- If the TPI Room Thermostats are de-energized (battery replacement), the learning process will restart. The learning process should be considered as 7 days.
FREQUENTLY ASKED QUESTIONS
Is my Room Thermostat compatible with my heating/cooling unit?
– If your heating / cooling unit has on-off connections, your Room Thermostat
is compatible. You can find information about your heating / cooling unit from
your heating / cooling unit operating manual or from your heating / cooling
unit service.
How will I connect my Room Thermostat to the heating/cooling unit?
– We recommend that the connection between your Room Thermostat and the
Heating/Cooling unit should be made by professionally qualified persons.
– 2×0.75 mm cable is sufficient for the Room Thermostat – heating / cooling unit
connection.
– Connect one end of the cable pair to the room thermostat connection
terminals stated in the user manual of the heating / cooling unit.
– Connect the other end of the cable pair to COM and NO inputs of the terminal
inside the Wall Hanger of Room Thermostat as shown in the “ROOM THERMOSTAT
WIRING DIAGRAM” section.
– The direction of the cable ends does not matter.
DECLARATION OF CONFORMITY
ISIPARK İÇ VE DIŞ TİC. İNŞ. ISITMA SİSTEMLERİ OTO. SAN.A.Ş.which Head Office and
production site is located on Fatih Mah. 1188 Sk.
No:13/A Sarnıç – Gaziemir – İZMİR – TÜRKİYE confirms and declares that the
product marked with CE and its specifications below is covered by the
provisions of the mentioned directive.
Brand……………….: GENERAL Life
Product Name………..: HT220S
Product Type…………….Digital Room Thermostat
Compatible Directives:
Electromagnetic Compatibility Regulation 2014/30/EU
(EMC EN 61000-6-3: 2007 + A1: 2011, EN 61000-6-1: 2007)
Low Voltage Directive 2014/35/EU
(LVD EN 60730-2-9:2010, EN 60730-1:2011)
Additional Information: The mentioned product can be used with heating/cooling
units with on / off output and compliance with the directives only covers the
product. ISIPARK is not responsible for the entire system’s compliance with
the directives. This statement is not valid if changes are made to the product
without our approval.
WARRANTY CONDITIONS
-
The warranty period starts from the invoice date and warranted against manufacturing defects for 5 years.
-
Devices and apparatus are delivered to the customer in working condition in our company. On-site commissioning is subject to a service fee.
-
The repair of the devices and apparatus covered by the warranty is carried out in our company factory and should send by contracted transportation company. In on-site services, the transportation and accommodation expenses of the service personnel belong to the customer. The shift fee during transportation is added to the service fee and collected in advance.
-
The maintenance of devices and apparatus is done in our company. For the maintenance of the devices and apparatus, the round travel fares belongs to the customer.
-
In case of malfunctioning of the devices and apparatus whose warranty period continues, it is tested in our company whether the malfunction is caused by a customer or manufacturer fault, and it is reported with a report issued by our company.
-
In case of detection of manufacturer-induced errors of devices and apparatus whose warranty period continues, the customer can request a replacement or repair of the devices and apparatus at full expense by the manufacturer, unless it’s higher than the product’s price.
-
In the event that the faults of the devices and apparatus whose warranty period continues are determined as caused by the customer, all expenses would be belong to the customer.
-
Customers should be aware of damages (if there is any) of product and warn manufacturer since the day warranty duration starts.If customer do not warn manufacturer with knowledge of damage, customer lose the rights of article 6.
-
Malfunctions resulting from the use of devices and apparatus contrary to the matters stated in the User Manual are not covered by the warranty.
-
Devices and their apparatus are out of warranty if they are beaten, broken or scratched by the customer.
-
Damages resulting from the use of devices and apparatus belonging to other brands and models without the approval of the manufacturer are not covered by the warranty.
-
Battery leakage and errors due to rust, oxidation and liquid contact by working in acidic / humid environments are not covered by the warranty.
-
When the product is not used for a long period (more than 15 days), remove the batteries. Otherwise, malfunctions that will occur are out of warranty.
-
Damages that may occur during the transportation of devices and apparatus are not covered by the warranty. Customers can take a transportation insurance.
-
Damages caused by mains voltage / faulty electrical installation are not covered by the warranty.
-
Devices and apparatuses are out of warranty for malfunctions caused by force majeure such as fire, flood, earthquake etc.
-
All of the devices and apparatuses, including all their parts, are under the warranty of our company.
-
In case of malfunction of the devices and apparatuses within the warranty period, the time spent during repairment period is added to the warranty period.
The repair period of the product cannot exceed 20 working days. This period starts from the date of notification to the service station of the malfunction related to the product or, in the absence of a service station, to the seller, dealer, agency, representative, importer or manufacturer of the product. Consumer can report the problem by; phone, fax, e-mail, registered and reply paid letter or a similar way. However, in case of a conflict, responsibility of prove is belong to the customer. If the malfunction of the product is not repaired within 20 working days, the manufacturer-producer or importer; has to allocate another product with similar features to the use of the consumer until the repair of the product is completed, -
Although the consumer uses his/her repair rights, -If the product breaks down for 4 times in a year or 6 times in warranty duration and these problems effects main purpose of the product. (starting from delivery time during warranty.)
-Exceeding the maximum time required for repair,
-In the event that the service station is not available, if it is determined that the repair of the defect is not possible with the report prepared (in order) by one of the seller, dealer, agency, representative, importer or manufacturer, a refund or a price discount at the rate of defect can be requested. -
The customer can make complaints and appeals to consumer courts or consumer arbitration committees.
-
The warranty document must be kept by the customer during the warranty period. If the document is lost, a second document will not be issued. In case of loss, repair and replacement of devices and apparatus will be made for a fee.
WARRANTY CERTIFICATE
Manufacturer
Title: ISIPARK İÇ DIŞ TİC. A.Ş.
Adress: Fatih Mah. 1188 Sk. No:13/A Sarnıç
Gaziemir İzmir-TÜRKİYE
Tel: +90 (232) 457 99 50
Fax: +90 (232) 457 91 22
E-mail:
generallife@generallife.com.tr
Authorized Signature:
Company Stamp:
Product
Type: Digital Room Thermostat
Brand: GENERAL Life
Model: HT220S
Warranty Period: 5 Years
Max. Time to Repair: 20 Days
Bandrol and Serial Number:
Vendor
Title:……………………..
Adress:……………………….
Tel:…………………………………
Fax:…………………………….
E-Mail:………………………………..
Invoice Date and Number:…………..
Delivery Time and Place:……………
Authorized Signature:……………..
Company Stamp:……………………..
Product
Type: Digital Room Thermostat
Brand: GENERAL Life
Model: HT220S
STAMP
ISIPARK reserves the rights of changing product specifications and user
manuals.
- For all changes, you may visit generallife.com.tr
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>