qi2 YMX-WR01 Wireless Charger User Manual
- August 27, 2024
- Qi2
Table of Contents
qi2 YMX-WR01 Wireless Charger
Specifications
- Product name: Wireless charger
- Product Size: 56mm x 56mm x 9.5mm
- Input: 5V/2A, 9V/2.2A
- Model: YMX-WR01
- Product weight: 100g
- Output: 15W/10W/7.5W/5W
Easy to Apply
The QI2 Wireless charger features a magnetic wireless charging area specifically designed for iPhones. It effortlessly aligns and securely attaches to your iPhone. Use a 20W or higher power wall charger to connect the Wireless charger for optimal performance.
QI2 Wireless charger
- Magnetic wireless charging area for iPhone
- Power supply: TYPE-C.
Wireless charger effortlessly aligns and securely attaches to your iPhone Please use a 20W or higher power wall charger to connect the Wireless charger.
Compatible Devices
This wireless charging pad is compatible with iPhone 14/13/12 Pro Max Plus as well as AirPods models with a wireless charging case.
warm tip: 15W fast charging requires the system of iPhone13-15 series models to be upgraded to IOS17.2 or above, and the iPhone12 series mobile phones need to upgrade the system to IOS17.4 or above.
Matters needing attention
- Please use a qualified fast charging power adapter (recommended to use PD 18W or higher power), otherwise it may cause unstable charging
- Please do not place metal debris or magnetic cards on this product as it may cause damage or abnormal charging
- Do not forcefully pull the charging cable to avoid the power cord breaking or falling off
- Please do not disassemble or put this product into fire or water by yourself to avoid short circuits and leakage
- Do not use this product in severely high-temperature, humid, or corrosive environments to avoid damaging the circuit and causing leakage
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance between 20cm of the radiator and your body.