SwanScout 3A 3 In 1 Power Bank Wireless Apple Charging Station User Manual
- June 14, 2024
- SwanScout
Table of Contents
Scout for elegance
User Manual
SwanScout Portable Charging Station
3A 3 In 1 Power Bank Wireless Apple Charging Station
Product Overview
Before using this product, please read this user manual thoroughly and take
good care of it.
Compatible
Please refer to the Website’s images or text descriptions for information on Specific compatible types of phones, earbuds charging cases, and watches.
Product instructions
Connect one end of the PD power adapter to the product’s USB-C input connector
and the other end to the power source.
Note. It may not be feasible to charge all three devices (the phone, the
earbuds charging case, and the watch) simultaneously if you don’t use a PD
charger higher than 20W power.
How to charge this product
Insert the charging cable connected to the powersupply into the USB-C port
to charge ths product.
Tip: When the power indicator flashes, it Means it is charging, and When
the 4 power indicators are always On, it means :t is fully charged.
How to use wireless charging:
- Click the power button ta turn this producton.
- Place your phone, watch and earbuds charging case on the corresponding wireless charging area to charge.
Wireless chatging maybe affected when the device’s power level is low. or your convenence, Please Charge it in time.
How to use wired charging:
Plug the charging cabla into the USB-C port of this product, connect the
device to be charged.
Power button:
To turn on the product, click the power bufton once. To turn it off and
halt the output, double click the power button. If the product s not in use
for 36 minutes, it will turn itself off.
Indicator Light Guide
Product Parameters
| Battery capauty : | 10000mAh |
|---|---|
| Rated capacity: | 6000mAh (23 1Wh) |
| USB-C input/output : | 5V=3A, 9V=:2A, 12V=1.5A |
| Wireless Output | 7.5W/LOW/15W Max (for phone), 3.5W Max (for earbucts), 2.5W |
Max (for watch).
Important Reminder
- The product includes a USB-C cable, it is recomended that you use a PD adapterto charge this device (purcihased separately).
- The correct operation of this charger is impeded by any phone case or earbuds Case that is thicker than Smm
****waming
- To avoid nsk,never attsmpt to disissemble or alter the intemal cornporrents of this device by yourself.
- Please use this product between the temperatures of 0°C and 40°C (32°F and 104°F). To prevent equipment failure, do not use this product in an environment with high temperatures and umidity.
- Do not place metallic foreign obpcts in the wreless charging area.
- Avoid throwing this product Intoa fire since doing so might cause theequipment to explode or catch fire.
- If droppesi, burnt, pierced, or crushed, thisdevice, which includes a battery, might be damaged, lose functiarung, of inflict njury.
- Avod exposing this Product to high ternperatures or placing it near appliances that produce hest, such as heaters, microwaves, and ovens
- To prevent harm or other risks, do not let kidsor pets iingest this product.
- This product’s radio waves may cause pacemakers, defiibrillators, or other medical equipment to malfunction. Keep this product and your medical gadget separated by a safe distance. For information unique to your medical device, speak with your doctor and the manufacturer. If you believe this product is interfering with your pacemaker, defibrillator, or any other medical equipment, stop using it.
- Please support recycling efforts and follow local laws regarding thedisposalof thisdevice and ite accessories.
FCC Statement
This device complies with part 15 of the FCC Rules Operator is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesiiredo peration.
Warning
Changes or modifications not expressly approved by the party responsible
for complianca could void the user’s authority to operate the equipment.
Note
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residerual irstallation This equipment generates uses and can radiate radio
frequency energy arid, if not installed and used in accordance with the
instructions may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radia or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or mare
of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different fram that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV tect.nican for help
IC Statement
This device complies with RSS-216 of Industry Canada. Operation Is subject to
the condition that this de.ice does not cause harmful interfarence.
RSS-Gen Issue § March 2019
This device contains licance -exempt transmitter (8)/receivar (s) that comply
with Innovation, Science and Economic Development Canada’s licence- exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that maycause undesired operation of the device.
Any changes or modifications not expressly approved by the party responsible
for compliance cou’d void the user’s authority to operate the equipment.
RF exposure statement:
The equipment complies with IC Radiation exposure Imit set forth for
uncontrolied environment. This equipment should be installed and operated With
minimum distance 20cm between the radiator and your body
Follow us to get the latest news and activities:
For more product information, please visit:
www.swanscout.com
For customer support, please contact:
support@swanscout.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>